my 80 build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 04-27-2009, 03:27 PM

I could, but I don't want to lose the center seat completely

flamingbig10 · 04-27-2009, 09:21 PM

In a week or so I will be adding a hood liner and a column dress up kit when the ups man delivers it

flamingbig10 · 04-28-2009, 11:40 PM

About got the modifications done to speaker box, now it need to be covered, and wile I was taking the speaker box I scraped the top part of the door panel

warpig98 · 04-29-2009, 05:38 PM

oh yeah i c. just a heads up, i think the top of your bowtie is crookid.

flamingbig10 · 04-29-2009, 07:19 PM

Oh I know It's going to over lay bowtie with trim and plexie glass

warpig98 · 04-30-2009, 03:45 PM

oh i c. you gonna put some LEDs behind the plexi glass. maybe fog you the plexi glass.

flamingbig10 · 04-30-2009, 11:26 PM

Quote:

Originally Posted by warpig98

oh i c. you gonna put some LEDs behind the plexi glass. maybe fog you the plexi glass.

yes, a few parts that I ordered came today flamed air cleaner, hood liner, and column dress up kit and yesterday I got some 6.5 that are going in the kick panels

flamingbig10 · 05-01-2009, 07:58 PM

Installed the hood liner today

flamingbig10 · 05-03-2009, 10:50 PM

I decided I'm going to add a couple of leafs spring back to my truck, to give a little more rake since it seams like around every few months the back of my truck gets lower and lower

flamingbig10 · 05-06-2009, 12:54 AM

well I got the back lifted

JohnC · 05-06-2009, 09:16 AM

Do you have your column dress up kit on yet? Those levers look good.

jchav62 · 05-06-2009, 11:02 AM

Looking good!

flamingbig10 · 05-06-2009, 12:19 PM

thanks, I've installed the tilt lever, and hazards

flamingbig10 · 05-09-2009, 01:02 AM

flamingbig10 · 05-11-2009, 11:46 PM

I finally installed the column dress up kit, and headlight pull knob now I need to do something about the shifter

heavychevy79 · 05-18-2009, 02:51 AM

How much was it lowered or what lowering parts did you have on it at this stage?

flamingbig10 · 05-18-2009, 02:55 AM

that would be 1 coil cut off the factory coils and drop shackles

heavychevy79 · 05-18-2009, 03:15 AM

Looks like a 3 inch drop on the front. Drop shackles don't seem to do very much do they?
I'm guessing those are all 275/60s

It's sitting like my truck is now, it makes me want to lean the seat back.

flamingbig10 · 05-18-2009, 03:31 AM

the coil springs were a little weak so it was about a 3" drop, and yes the tires were 275/60s

flamingbig10 · 05-24-2009, 12:42 AM

few updates
I removed the braided hose covers and added a air dam

warpig98 · 05-26-2009, 04:41 PM

hey question for you. why is it that your speedo is at 30mph and you tach at 1, when your not driving it. i have those same gauges the i'm putting in mine, and i hope that there not bad gauges.

flamingbig10 · 05-26-2009, 07:32 PM

the spedo's broke I was fixing the light on the back and dropped it on the ground and the tach sets at 1 grand with out power and when it has power it sets to 0, the gauges are good for the price just be careful with them they break easy

tvblazer78 · 05-26-2009, 08:03 PM

Air dam looks good man...

flamingbig10 · 05-26-2009, 10:43 PM

thanks Travis

GMC Guy · 05-28-2009, 05:20 PM

i really love what you've done with your truck. i'm 17 and i've my 79 gmc for about a year and it's amazing how much i've learned from working on my truck. anyway, i noticed you decided to go with a summit heater and removed all the stock a/c crap. i did the exactly same thing a long time ago, and i love the clean look under the hood. but i haven't gotten around to installing the new heater yet, mostly because i'm having a hard time figuring out a good mounting position, and because i really just don't need right now...so i was curious of how you mounted and plumbed it, or if you are just putting it off like me

thanks, and the truck is really looking great

04-27-2009, 03:27 PM	#126
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I could, but I don't want to lose the center seat completely __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-27-2009, 09:21 PM	#127
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build In a week or so I will be adding a hood liner and a column dress up kit when the ups man delivers it __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-28-2009, 11:40 PM	#128
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build About got the modifications done to speaker box, now it need to be covered, and wile I was taking the speaker box I scraped the top part of the door panel __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-29-2009, 05:38 PM	#129
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Re: my 80 build oh yeah i c. just a heads up, i think the top of your bowtie is crookid. __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

04-29-2009, 07:19 PM	#130
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build Oh I know It's going to over lay bowtie with trim and plexie glass __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-30-2009, 03:45 PM	#131
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Re: my 80 build oh i c. you gonna put some LEDs behind the plexi glass. maybe fog you the plexi glass. __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

05-01-2009, 07:58 PM	#133
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build Installed the hood liner today __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-03-2009, 10:50 PM	#134
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I decided I'm going to add a couple of leafs spring back to my truck, to give a little more rake since it seams like around every few months the back of my truck gets lower and lower __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-06-2009, 12:54 AM	#135
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build well I got the back lifted __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-06-2009, 09:16 AM	#136
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 80 build Do you have your column dress up kit on yet? Those levers look good.

05-06-2009, 11:02 AM	#137
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: my 80 build Looking good! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-06-2009, 12:19 PM	#138
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks, I've installed the tilt lever, and hazards __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-09-2009, 01:02 AM	#139
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-11-2009, 11:46 PM	#140
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I finally installed the column dress up kit, and headlight pull knob now I need to do something about the shifter __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-18-2009, 02:51 AM	#141
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: my 80 build How much was it lowered or what lowering parts did you have on it at this stage? Attached Images



Register or Log In To remove these advertisements.

05-18-2009, 02:55 AM	#142
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build that would be 1 coil cut off the factory coils and drop shackles __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-18-2009, 03:15 AM	#143
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: my 80 build Looks like a 3 inch drop on the front. Drop shackles don't seem to do very much do they? I'm guessing those are all 275/60s It's sitting like my truck is now, it makes me want to lean the seat back. Last edited by heavychevy79; 05-18-2009 at 03:16 AM.

05-18-2009, 03:31 AM	#144
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build the coil springs were a little weak so it was about a 3" drop, and yes the tires were 275/60s __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-24-2009, 12:42 AM	#145
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build few updates I removed the braided hose covers and added a air dam __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-26-2009, 04:41 PM	#146
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Re: my 80 build hey question for you. why is it that your speedo is at 30mph and you tach at 1, when your not driving it. i have those same gauges the i'm putting in mine, and i hope that there not bad gauges. __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

05-26-2009, 07:32 PM	#147
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build the spedo's broke I was fixing the light on the back and dropped it on the ground and the tach sets at 1 grand with out power and when it has power it sets to 0, the gauges are good for the price just be careful with them they break easy __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-26-2009, 08:03 PM	#148
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: my 80 build Air dam looks good man... __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

05-26-2009, 10:43 PM	#149
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks Travis __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-28-2009, 05:20 PM	#150
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: my 80 build i really love what you've done with your truck. i'm 17 and i've my 79 gmc for about a year and it's amazing how much i've learned from working on my truck. anyway, i noticed you decided to go with a summit heater and removed all the stock a/c crap. i did the exactly same thing a long time ago, and i love the clean look under the hood. but i haven't gotten around to installing the new heater yet, mostly because i'm having a hard time figuring out a good mounting position, and because i really just don't need right now...so i was curious of how you mounted and plumbed it, or if you are just putting it off like me thanks, and the truck is really looking great

Register or Log In To remove these advertisements.