could someone teach me somthing. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

howdigetsogood · 07-01-2009, 01:15 PM

is the wrap around window specific to certain years...or is it just a custom feature for all years... and why does that simple feature make the trucks look so much better??imo.

Bears63 · 07-01-2009, 01:21 PM

60-63 had the wrap-around (or knee-knocker) windshields. GM did away with it for '64.

howdigetsogood · 07-01-2009, 01:34 PM

thankyou for that. now i know what to look for.

**aerotruk63** · 07-01-2009, 01:36 PM

Ford had the flat windshield design before GM and sales were dropping at GM because of the problems they had with the torsion bars of the 60-62 years. Despite a large media campaign and all new suspension and drive train in 63 the populace viewed the truck as old styling. Gm decided to change the look and featured a flat windshield in 64. Statistically sales rose after 63 and perhaps that is why you see more 64-66 trucks that their older brothers.

Bears63 · 07-01-2009, 01:48 PM

Quote:

Originally Posted by aerotruk63

Statistically sales rose after 63 and perhaps that is why you see more 64-66 trucks that their older brothers.

Didn't sales rise rather dramatically after the design change in for '64? I was thinking that it was a pretty big jump. I have found that with the 60-63 design it is really a love/hate thing. I absolutely love the look of the wraparound windshield while many others find it horribly ugly.

**aerotruk63** · 07-01-2009, 02:05 PM

Quote:

Originally Posted by Bears63

Didn't sales rise rather dramatically after the design change in for '64? I was thinking that it was a pretty big jump. I have found that with the 60-63 design it is really a love/hate thing. I absolutely love the look of the wraparound windshield while many others find it horribly ugly.

Personal taste perhaps,it was the end of an era.I prefer the wrap around windshield. The trucks seem to have lost their luster after 63. same grille for next 3 years.

daverod · 07-01-2009, 02:15 PM

Parts for those trucks cost a lot more. But if you love it.

Bears63 · 07-01-2009, 02:21 PM

Believe me, I know full well the parts cost, especially for a '63 C20. It's kind of mind boggling at times

. That's one thing I try to warn people about. If you want to save money then go with the '64-'66 style.

**aerotruk63** · 07-01-2009, 02:37 PM

Who the heck factors in cost, I`m on a steady diet of oatmeal and water and I live out of my van. Look at what you`ve got then look what others have become complacent with.

retodd7711 · 07-01-2009, 03:03 PM

Quote:

Originally Posted by Bears63

. I have found that with the 60-63 design it is really a love/hate thing. I absolutely love the look of the wraparound windshield while many others find it horribly ugly.

I hear you man,

howdigetsogood · 07-03-2009, 09:56 AM

dang you guys are badass. i ask one little question and get loads of informative responses. i guess its a good thing i got the 64 model. my funds are little to none. is any body in here in the orlando florida area???? my trucks in millions of pieces and i dont know where to go from here.

daverod · 07-03-2009, 11:06 AM

Quote:

Originally Posted by howdigetsogood

dang you guys are badass. i ask one little question and get loads of informative responses. i guess its a good thing i got the 64 model. my funds are little to none. is any body in here in the orlando florida area???? my trucks in millions of pieces and i dont know where to go from here.

Well, first get some wire and some duct tape.

All the info is here all you have to do is search and read.

Ghostwhite · 07-03-2009, 07:50 PM

Yeah I've found out the meat and potatoes of the aftermarket is in the 64-66 trucks. I couldn't get suspension parts for my 62 even if I wanted to! Good thing I'm gonna switch out the x member and bag it anyways. But even the little things are harder to find on the pre 64

**aerotruk63** · 07-03-2009, 08:05 PM

1960-1966 Factory Assembly Manual, you can find this book everywhere. It has a bunch of factory drawings that can help you to put your truck back together. Best of all look for trucks like yours around where you live, ask the owners to show you their trucks. Look at how there's are put together. Digital camera is really handy at capturing details. Scrapyards have a vast amount of information in their inventories and they let you lean on their truck. Take notes when you take something apart. Bag it and catalog it.

**aerotruk63** · 07-03-2009, 08:08 PM

Sorry if we made you feel bad about not having a 63!

howdigetsogood · 07-03-2009, 08:41 PM

im happy with what i have. im just never satisfied. i have another question too. does anyone know about how many miles a 300ci I6 could put on the road before going ka-put?

**aerotruk63** · 07-04-2009, 05:58 AM

Inline 6 engine's seem to outlast V8's cause you don't beat on them as much I would assume. I've had inline's for 25 years now and have not always treated them right and they keep going. You always here stories guys buying parts vehicles and trying to blow up their inline 6's but they keep going. 194-230-250-292 share parts with small block's so you can do a lot to them. You should see the reaction from people when you light up the tires with "just a 6". Clifford Performance logo " 6=8 "

howdigetsogood · 07-04-2009, 09:03 AM

well at this point in time my daily driver is a 1998 ford contour with 117253 miles on it, that was gifted to me by my mother. i had an offer to trade it for a 1979 ford f100 shortbed with no rust and all original. 2wd auto trans. does anyone think i should go through with that deal?

07-01-2009, 01:15 PM	#1
howdigetsogood Registered User Join Date: Jun 2009 Location: orlando florida Posts: 32	could someone teach me somthing. is the wrap around window specific to certain years...or is it just a custom feature for all years... and why does that simple feature make the trucks look so much better??imo.

07-01-2009, 01:21 PM	#2
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: could someone teach me somthing. 60-63 had the wrap-around (or knee-knocker) windshields. GM did away with it for '64. __________________ Mike "Bear" Shea

07-01-2009, 01:34 PM	#3
howdigetsogood Registered User Join Date: Jun 2009 Location: orlando florida Posts: 32	Re: could someone teach me somthing. thankyou for that. now i know what to look for.

07-01-2009, 01:36 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: could someone teach me somthing. Ford had the flat windshield design before GM and sales were dropping at GM because of the problems they had with the torsion bars of the 60-62 years. Despite a large media campaign and all new suspension and drive train in 63 the populace viewed the truck as old styling. Gm decided to change the look and featured a flat windshield in 64. Statistically sales rose after 63 and perhaps that is why you see more 64-66 trucks that their older brothers. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-01-2009, 02:15 PM	#7
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: could someone teach me somthing. Parts for those trucks cost a lot more. But if you love it. Last edited by daverod; 07-01-2009 at 02:15 PM.

07-01-2009, 02:21 PM	#8
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: could someone teach me somthing. Believe me, I know full well the parts cost, especially for a '63 C20. It's kind of mind boggling at times . That's one thing I try to warn people about. If you want to save money then go with the '64-'66 style. __________________ Mike "Bear" Shea

07-01-2009, 02:37 PM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: could someone teach me somthing. Who the heck factors in cost, I`m on a steady diet of oatmeal and water and I live out of my van. Look at what you`ve got then look what others have become complacent with. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-03-2009, 09:56 AM	#11
howdigetsogood Registered User Join Date: Jun 2009 Location: orlando florida Posts: 32	Re: could someone teach me somthing. dang you guys are badass. i ask one little question and get loads of informative responses. i guess its a good thing i got the 64 model. my funds are little to none. is any body in here in the orlando florida area???? my trucks in millions of pieces and i dont know where to go from here.

07-03-2009, 07:50 PM	#13
Ghostwhite Squarebody guy Join Date: Apr 2009 Location: Minnesota Posts: 335	Re: could someone teach me somthing. Yeah I've found out the meat and potatoes of the aftermarket is in the 64-66 trucks. I couldn't get suspension parts for my 62 even if I wanted to! Good thing I'm gonna switch out the x member and bag it anyways. But even the little things are harder to find on the pre 64

07-03-2009, 08:05 PM	#14
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: could someone teach me somthing. 1960-1966 Factory Assembly Manual, you can find this book everywhere. It has a bunch of factory drawings that can help you to put your truck back together. Best of all look for trucks like yours around where you live, ask the owners to show you their trucks. Look at how there's are put together. Digital camera is really handy at capturing details. Scrapyards have a vast amount of information in their inventories and they let you lean on their truck. Take notes when you take something apart. Bag it and catalog it. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-03-2009, 08:08 PM	#15
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: could someone teach me somthing. Sorry if we made you feel bad about not having a 63! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-03-2009, 08:41 PM	#16
howdigetsogood Registered User Join Date: Jun 2009 Location: orlando florida Posts: 32	Re: could someone teach me somthing. im happy with what i have. im just never satisfied. i have another question too. does anyone know about how many miles a 300ci I6 could put on the road before going ka-put?

07-04-2009, 05:58 AM	#17
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: could someone teach me somthing. Inline 6 engine's seem to outlast V8's cause you don't beat on them as much I would assume. I've had inline's for 25 years now and have not always treated them right and they keep going. You always here stories guys buying parts vehicles and trying to blow up their inline 6's but they keep going. 194-230-250-292 share parts with small block's so you can do a lot to them. You should see the reaction from people when you light up the tires with "just a 6". Clifford Performance logo " 6=8 " __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-04-2009, 09:03 AM	#18
howdigetsogood Registered User Join Date: Jun 2009 Location: orlando florida Posts: 32	Re: could someone teach me somthing. well at this point in time my daily driver is a 1998 ford contour with 117253 miles on it, that was gifted to me by my mother. i had an offer to trade it for a 1979 ford f100 shortbed with no rust and all original. 2wd auto trans. does anyone think i should go through with that deal?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.