need help with my rearend bearings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

into69z · 08-07-2009, 10:48 PM

I have a 1969 c-20 and I swapped in a 1986 14 bolt 3/4 t rearend. this rearend has a 3.23 gear (that's why I did it). This is not a free-floater, and is considered a light 3/4 ton . the option code on the glove box reads....1gu5.....now what I need is new seals and bearings...do any of you have the bearing and seal part numbers? any additional info would be helpful

3r!c84 · 08-07-2009, 10:57 PM

dont have part numbers but i know how to take out the seals and bearins.
take the back of a hammer pry the seal out then the bearin u can use a slide hammer or i had to but it out with a lil die grinder

08-07-2009, 10:48 PM	#1
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	need help with my rearend bearings I have a 1969 c-20 and I swapped in a 1986 14 bolt 3/4 t rearend. this rearend has a 3.23 gear (that's why I did it). This is not a free-floater, and is considered a light 3/4 ton . the option code on the glove box reads....1gu5.....now what I need is new seals and bearings...do any of you have the bearing and seal part numbers? any additional info would be helpful __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

08-07-2009, 10:57 PM	#2
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: need help with my rearend bearings dont have part numbers but i know how to take out the seals and bearins. take the back of a hammer pry the seal out then the bearin u can use a slide hammer or i had to but it out with a lil die grinder __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.