What would you do to this truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 08-20-2009, 12:31 AM

gringoloco · 08-20-2009, 01:23 AM

Bring the nose down, for sure. Maybe with some C5 parts

Blitz · 08-20-2009, 01:43 AM

Honestly...being as how it's such a clean example of that year and option package, I'd probably either put some 20" Wheel Vintiques 90 series Rally wheels on it or Cragar S/S. I think American Racing Torque Thrust grey centers would look great if not for the hassle or Vintage Wheel Works V45's if...IF they came in 20's. If you could find a wheel to replicate the truck rallys and put the center cap on it, that could also be an option. MY taste tell me when I look at this particular truck a grey centered classic wheel but a bit modern on the size just to give it the updated look. Like I said before the exterior is a clean example of that package and one like this I'd keep it to wheels and a drop and be done. If it didn't have all the exterior trim and be in such excellent looking conidition I might go a different route otherwise it's an easy call for me.

hotrodrookie · 08-20-2009, 01:54 AM

Drive it!

OARNGESI · 08-20-2009, 03:16 AM

Looks great as is

AceX · 08-20-2009, 04:33 AM

Different wheels, 2-4" from the front of the bed would do a disappearing act, section the rear bumper so it matches the rocker panel, and a big stereo (honestly, who didn't see that last part comin'?)

n2billet · 08-20-2009, 05:57 AM

Cut it up and toss the Rally's!

**lolife99** · 08-20-2009, 06:04 AM

Rolling "showcase" for new Porterbuilt products! (the mild version)
As in, a-arms, trans crossmember, trailing arm crossmember, tubular trailing arms, and a cool set of 20's. Billet Specialties (grey centered) Bonnevilles would be my choice.

**N2TRUX** · 08-20-2009, 08:34 AM

I would put it as low as it would go with out cutting the bed. Add a set of 22's and drive the snot out of it.

Naterman35 · 08-20-2009, 08:35 AM

Bagged and either the MB oldschool, Torque thrust, or cragars In a 20 with a matte gray finish.
Take and raise the bed floor up and cover a notch.
Thats it.

hammered65 · 08-20-2009, 08:45 AM

I would shave everything off, fill the marker lights in the bumper and tuck them in closer to the body, put it on the ground with some 22's and probably do a two-tone paint scheme. Those B.A.D Sandoval wheels that rustSpot is running would look awesome on here too.

*1sik52* · 08-20-2009, 08:56 AM

Pull it into the shop and get out the sawzall, plasma cutter, and welder!

*1sik52* · 08-20-2009, 09:04 AM

Or go another route. Be different, DONK IT! Put some 32s on it, the fake Buick port holes on the fenders, put the "32" decals on it to let people know its got 32's. and theme it out with Cheetos logos all over the paint job. Install tvs everywhere. 2 in the front bumper, 2 in each visor, 1-30 in plasma hanging from the headliner, and a couple in the gate so the people behind you can watch also. Oh and dont forget the row of marine 6x9s under both bumpers so everyone in the hood can jam with ya!

LowSmoothCool · 08-20-2009, 09:30 AM

Beautiful truck I would drive the hell out of it....

Naterman35 · 08-20-2009, 09:35 AM

Quote:

Originally Posted by 1sik52

or go another route. Be different, donk it! Put some 32s on it, the fake buick port holes on the fenders, put the "32" decals on it to let people know its got 32's. And theme it out with cheetos logos all over the paint job. Install tvs everywhere. 2 in the front bumper, 2 in each visor, 1-30 in plasma hanging from the headliner, and a couple in the gate so the people behind you can watch also. Oh and dont forget the row of marine 6x9s under both bumpers so everyone in the hood can jam with ya!

amen!

smashingchuck · 08-20-2009, 09:43 AM

Quote:

Originally Posted by n2billet

Cut it up and toss the Rally's!

yep.

Mordachai · 08-20-2009, 09:49 AM

I'm guessing it will at the very least get an altitude adjustment, this is in the suspension forum....

and you happen to be a very talented chassis/suspension fabricator, so I'm guessing like others have guessed. a showcase for new PB products?

AVS_JASON · 08-20-2009, 09:50 AM

I agree with 1sik52....

Its time Porterbuilt branched out into the "donk" market.

PBFAB.COM · 08-20-2009, 10:31 AM

Lots of good ideas! Definitely a beautiful truck as it sits.

I am sure we all know what's coming.... Pulling the motor/trans today (It's easier to work in there without a motor in the way).

Jayman931 · 08-20-2009, 11:06 AM

Cash for clunkers!! Then you can get a new Toyota Prius!

or....

You can put in some Steppinwolf.....Grab a cigarette....tear up some pavement and maybe throw some styrofoam cups (with CFC's) out of the window....feel the breeze..

chevy_mike · 08-20-2009, 11:11 AM

Quote:

Originally Posted by LowSmoothCool

Beautiful truck I would drive the hell out of it....

x1000

**67cheby** · 08-20-2009, 12:10 PM

set out in my garage and stare at it , love it, wax it, hold it real close like....I think i might have problems... last night i dreamed of getting a dropmember for my truck.. i think i am sick in the head

Naterman35 · 08-20-2009, 12:18 PM

Quote:

Originally Posted by 67cheby

set out in my garage and stare at it , love it, wax it, hold it real close like....I think i might have problems... last night i dreamed of getting a dropmember for my truck.. i think i am sick in the head

Far from sick... Your in PERFECT health.

**67cheby** · 08-20-2009, 12:28 PM

you really think im ok, i was telling the truth about dreaming of the dropmember last night

n2billet · 08-20-2009, 12:33 PM

Quote:

Originally Posted by 67cheby

you really think im ok, i was telling the truth about dreaming of the dropmember last night

It's just a phone call away to becoming a reality.

08-20-2009, 12:31 AM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	What would you do to this truck? __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-20-2009, 01:23 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: What would you do to this truck? Bring the nose down, for sure. Maybe with some C5 parts __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

08-20-2009, 01:43 AM	#3
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: What would you do to this truck? Honestly...being as how it's such a clean example of that year and option package, I'd probably either put some 20" Wheel Vintiques 90 series Rally wheels on it or Cragar S/S. I think American Racing Torque Thrust grey centers would look great if not for the hassle or Vintage Wheel Works V45's if...IF they came in 20's. If you could find a wheel to replicate the truck rallys and put the center cap on it, that could also be an option. MY taste tell me when I look at this particular truck a grey centered classic wheel but a bit modern on the size just to give it the updated look. Like I said before the exterior is a clean example of that package and one like this I'd keep it to wheels and a drop and be done. If it didn't have all the exterior trim and be in such excellent looking conidition I might go a different route otherwise it's an easy call for me.

08-20-2009, 01:54 AM	#4
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: What would you do to this truck? Drive it!

08-20-2009, 03:16 AM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: What would you do to this truck? Looks great as is __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

08-20-2009, 04:33 AM	#6
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What would you do to this truck? Different wheels, 2-4" from the front of the bed would do a disappearing act, section the rear bumper so it matches the rocker panel, and a big stereo (honestly, who didn't see that last part comin'?) __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

08-20-2009, 05:57 AM	#7
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: What would you do to this truck? Cut it up and toss the Rally's! __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

08-20-2009, 06:04 AM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: What would you do to this truck? Rolling "showcase" for new Porterbuilt products! (the mild version) As in, a-arms, trans crossmember, trailing arm crossmember, tubular trailing arms, and a cool set of 20's. Billet Specialties (grey centered) Bonnevilles would be my choice. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-20-2009, 08:34 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What would you do to this truck? I would put it as low as it would go with out cutting the bed. Add a set of 22's and drive the snot out of it. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-20-2009, 08:35 AM	#10
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: What would you do to this truck? Bagged and either the MB oldschool, Torque thrust, or cragars In a 20 with a matte gray finish. Take and raise the bed floor up and cover a notch. Thats it. Last edited by Naterman35; 08-20-2009 at 08:37 AM.

08-20-2009, 08:45 AM	#11
hammered65 Registered User Join Date: Jan 2007 Location: Houston Posts: 53	Re: What would you do to this truck? I would shave everything off, fill the marker lights in the bumper and tuck them in closer to the body, put it on the ground with some 22's and probably do a two-tone paint scheme. Those B.A.D Sandoval wheels that rustSpot is running would look awesome on here too.

08-20-2009, 08:56 AM	#12
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: What would you do to this truck? Pull it into the shop and get out the sawzall, plasma cutter, and welder!

08-20-2009, 09:04 AM	#13
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: What would you do to this truck? Or go another route. Be different, DONK IT! Put some 32s on it, the fake Buick port holes on the fenders, put the "32" decals on it to let people know its got 32's. and theme it out with Cheetos logos all over the paint job. Install tvs everywhere. 2 in the front bumper, 2 in each visor, 1-30 in plasma hanging from the headliner, and a couple in the gate so the people behind you can watch also. Oh and dont forget the row of marine 6x9s under both bumpers so everyone in the hood can jam with ya!

08-20-2009, 09:30 AM	#14
LowSmoothCool Jon@AirRideTech Join Date: Aug 2008 Location: Jasper Indiana Posts: 101	Re: What would you do to this truck? Beautiful truck I would drive the hell out of it.... __________________ Selling The best Damn Air Suspension www.ridetech.com jon@ridetech.com (812) 482-2932

08-20-2009, 09:49 AM	#17
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: What would you do to this truck? I'm guessing it will at the very least get an altitude adjustment, this is in the suspension forum.... and you happen to be a very talented chassis/suspension fabricator, so I'm guessing like others have guessed. a showcase for new PB products? __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72



Register or Log In To remove these advertisements.

08-20-2009, 09:50 AM	#18
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: What would you do to this truck? I agree with 1sik52.... Its time Porterbuilt branched out into the "donk" market.

08-20-2009, 10:31 AM	#19
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: What would you do to this truck? Lots of good ideas! Definitely a beautiful truck as it sits. I am sure we all know what's coming.... Pulling the motor/trans today (It's easier to work in there without a motor in the way). __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-20-2009, 11:06 AM	#20
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 136	Re: What would you do to this truck? Cash for clunkers!! Then you can get a new Toyota Prius! or.... You can put in some Steppinwolf.....Grab a cigarette....tear up some pavement and maybe throw some styrofoam cups (with CFC's) out of the window....feel the breeze.. __________________ The stupidty of your actions is directly proportionate to the number of people watching you...

08-20-2009, 12:10 PM	#22
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: What would you do to this truck? set out in my garage and stare at it , love it, wax it, hold it real close like....I think i might have problems... last night i dreamed of getting a dropmember for my truck.. i think i am sick in the head __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-20-2009, 12:28 PM	#24
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: What would you do to this truck? you really think im ok, i was telling the truth about dreaming of the dropmember last night __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.