My fuel cell rocks... from side to side ( pic ) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82Cecil · 08-27-2009, 07:26 PM

Before I press this curve out of the bottom of the cell, is this normal/needed?

I wouldn't think so but I've been surprised before.

Wild83C10 · 08-27-2009, 09:57 PM

Shouldn't be that way, who's cell is it?
The sump doesn't look straight, but it could be the picture.

72 SUPER10 · 08-27-2009, 11:00 PM

Sometimes happens when they pressure test it for leaks, does it say it has been tested ,

**Captainfab** · 08-27-2009, 11:14 PM

It is also common to get a little bit of distortion when welding a tank like that. Especially when you have the additional welding around the sump. IMO it really doesn't hurt anything. Are any of the other sides distorted?

Quote:

Originally Posted by 72 SUPER10

Sometimes happens when they pressure test it for leaks, does it say it has been tested ,

82Cecil · 08-28-2009, 05:34 PM

It is a 15 gal Jeg's brand, the picture does make the sump look crooked but it is not. The bottom is the only side with a bow in it.

I'm just going to press it flat.

Marv D · 08-29-2009, 11:27 AM

I guess I would ask 'why' you need it flat??????

mongoose · 09-13-2009, 05:56 PM

to make mounting it eaiser i suppose... as the tabs are on the bottom of the tank as well..

Wild83C10 · 09-13-2009, 06:06 PM

I have mine sitting on aluminum tubing. This spaces it off the bed and I didn't have to cut the bed up too much. I only put holes in for for the fuel lines.

djracer · 09-13-2009, 07:09 PM

Make sure you don't mount it by the tabs.

truckpoorpackrat · 09-13-2009, 07:49 PM

I would think that curve is there to allow the fuel to flow toward the sump, if you turn the level up & down is it setting flush with the bottom (I think you are holding the level on the bottom of the tank in the picture)? Does that make sense? James

08-27-2009, 07:26 PM	#1
82Cecil Registered User Join Date: Jan 2009 Location: Jacksonville FL Posts: 47	My fuel cell rocks... from side to side ( pic ) Before I press this curve out of the bottom of the cell, is this normal/needed? I wouldn't think so but I've been surprised before.

08-27-2009, 09:57 PM	#2
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: My fuel cell rocks... from side to side ( pic ) Shouldn't be that way, who's cell is it? The sump doesn't look straight, but it could be the picture. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

08-27-2009, 11:00 PM	#3
72 SUPER10 Registered User Join Date: Nov 2008 Location: LUCEDALE MS. Posts: 157	Re: My fuel cell rocks... from side to side ( pic ) Sometimes happens when they pressure test it for leaks, does it say it has been tested ,

08-28-2009, 05:34 PM	#5
82Cecil Registered User Join Date: Jan 2009 Location: Jacksonville FL Posts: 47	Re: My fuel cell rocks... from side to side ( pic ) It is a 15 gal Jeg's brand, the picture does make the sump look crooked but it is not. The bottom is the only side with a bow in it. I'm just going to press it flat.

08-29-2009, 11:27 AM	#6
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: My fuel cell rocks... from side to side ( pic ) I guess I would ask 'why' you need it flat?????? __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

09-13-2009, 05:56 PM	#7
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: My fuel cell rocks... from side to side ( pic ) to make mounting it eaiser i suppose... as the tabs are on the bottom of the tank as well.. __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

09-13-2009, 06:06 PM	#8
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: My fuel cell rocks... from side to side ( pic ) I have mine sitting on aluminum tubing. This spaces it off the bed and I didn't have to cut the bed up too much. I only put holes in for for the fuel lines. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

09-13-2009, 07:09 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: My fuel cell rocks... from side to side ( pic ) Make sure you don't mount it by the tabs. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2009, 07:49 PM	#10
truckpoorpackrat Registered User Join Date: Dec 2008 Location: joplin mo. Posts: 272	Re: My fuel cell rocks... from side to side ( pic ) I would think that curve is there to allow the fuel to flow toward the sump, if you turn the level up & down is it setting flush with the bottom (I think you are holding the level on the bottom of the tank in the picture)? Does that make sense? James



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.