I need specs for a bodydrop frame 2x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RotoFlex · 09-02-2009, 05:19 AM

new to the forum try searching but nothing came up ? so i was wondering if anybody has specs or can locate some for me.it can be for 20s or 22

ps original spec for frame will do high resolution thanks

c10addict · 09-02-2009, 08:48 AM

there are a few floating around on here... search for member abadsvt....

RotoFlex · 09-02-2009, 09:48 AM

hey thanks alot.i will look into it

jjjmm56 · 09-02-2009, 07:18 PM

Are you building your own frame?

RotoFlex · 09-02-2009, 08:59 PM

yes i am.any info would help

newagecustom · 09-03-2009, 01:55 AM

Theres alot of info. I build stock floor c10 frames. What specifically do you need to know?

RotoFlex · 09-03-2009, 10:00 AM

first of all thanks for helping. its the front part of the frame, I'm going to be using a drop member and i need to know how high do i need to go to clear my a arms?here is a pic of the info I'm looking for.picture don't show it but i need to know when to go back down for radiator support thanks

c10addict · 09-03-2009, 10:06 AM

With a dropmember you can leave the front frame rails alone unless your wanting to run a VERY tall tire..

RotoFlex · 09-03-2009, 10:12 AM

its going to be a 235/40/22

**N2TRUX** · 09-03-2009, 10:34 AM

Quote:

Originally Posted by rotoflex

its going to be a 235/40/22

That shows to be 29.4" tall. I think you are going through a lot of effort for a tire that comes close to clearing already. Talk to Nate for confirmation.

FnLow69 · 09-03-2009, 11:10 AM

When i started building my frame i called nate @ proterbuilt steet rods and he help me out a ton as well as Abadsvt (josh). With my setup i can run a 29" tall tire for sure, but being doored i cant go much bigger

I can find my measurements if you need them still.

justin

09-02-2009, 05:19 AM	#1
RotoFlex Registered User Join Date: Sep 2009 Location: Lehi Utah Posts: 105	I need specs for a bodydrop frame 2x4 new to the forum try searching but nothing came up ? so i was wondering if anybody has specs or can locate some for me.it can be for 20s or 22 ps original spec for frame will do high resolution thanks

09-02-2009, 08:48 AM	#2
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: I need specs for a bodydrop frame 2x4 there are a few floating around on here... search for member abadsvt.... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 09-02-2009 at 09:27 AM.

09-02-2009, 09:48 AM	#3
RotoFlex Registered User Join Date: Sep 2009 Location: Lehi Utah Posts: 105	Re: I need specs for a bodydrop frame 2x4 hey thanks alot.i will look into it

09-02-2009, 07:18 PM	#4
jjjmm56 Registered User Join Date: Jan 2009 Location: kissimmee Florida Posts: 494	Re: I need specs for a bodydrop frame 2x4 Are you building your own frame?

09-02-2009, 08:59 PM	#5
RotoFlex Registered User Join Date: Sep 2009 Location: Lehi Utah Posts: 105	Re: I need specs for a bodydrop frame 2x4 yes i am.any info would help

09-03-2009, 01:55 AM	#6
newagecustom c10 Chop Artist Join Date: Feb 2007 Location: az Posts: 481	Re: I need specs for a bodydrop frame 2x4 Theres alot of info. I build stock floor c10 frames. What specifically do you need to know?

09-03-2009, 10:00 AM	#7
RotoFlex Registered User Join Date: Sep 2009 Location: Lehi Utah Posts: 105	Re: I need specs for a bodydrop frame 2x4 first of all thanks for helping. its the front part of the frame, I'm going to be using a drop member and i need to know how high do i need to go to clear my a arms?here is a pic of the info I'm looking for.picture don't show it but i need to know when to go back down for radiator support thanks Attached Images Last edited by RotoFlex; 09-03-2009 at 10:10 AM.

09-03-2009, 10:06 AM	#8
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: I need specs for a bodydrop frame 2x4 With a dropmember you can leave the front frame rails alone unless your wanting to run a VERY tall tire.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 09-03-2009 at 10:06 AM.

09-03-2009, 10:12 AM	#9
RotoFlex Registered User Join Date: Sep 2009 Location: Lehi Utah Posts: 105	Re: I need specs for a bodydrop frame 2x4 its going to be a 235/40/22

09-03-2009, 11:10 AM	#11
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: I need specs for a bodydrop frame 2x4 When i started building my frame i called nate @ proterbuilt steet rods and he help me out a ton as well as Abadsvt (josh). With my setup i can run a 29" tall tire for sure, but being doored i cant go much bigger I can find my measurements if you need them still. justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.