1962 Suburban rear bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 09-03-2009, 10:33 AM

Is the 62 Suburban rear bumper actually a front?

4dranch · 09-03-2009, 11:26 AM

They look to be real close. I think the rear actually wraps around a little bit further. But I think the bracket mounting holes are same.
The stlye for both is the same. the rear does not have the cut out for the licence plate.

padresag · 09-03-2009, 12:10 PM

Quote:

Originally Posted by Tri-ProAutomotive

Is the 62 Suburban rear bumper actually a front?

no, but I guess that it could have been before the mounting holes were drilled.
just measure the distance between the frames front and rear and it will give you the diference
ron

**Captainfab** · 09-04-2009, 12:12 AM

Other than the hole spacing they are the same. Keep in mind though that the front bumper hole spacing is different between the '60-'62's and the '63-'66's. As for the rear bumper hole spacing I would have to verify if they are different in those same year groups.

Muleman100 · 09-04-2009, 12:54 PM

On building my 66 Burb I found the rear bumper bracket and holes are different from the front. Therefore I am looking for a rear bumper to finish my 66.

**Captainfab** · 09-05-2009, 12:06 AM

I measured my '60 GMC 4x4 Suburban frame at the rear and it is wider than a '63-'66 Suburban/Panel frame at the rear. So it appears that the '60-'62 Suburban/Panel rear bumper hole spacing is different than for the '63-'66's.

09-03-2009, 10:33 AM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	1962 Suburban rear bumper Is the 62 Suburban rear bumper actually a front?

09-03-2009, 11:26 AM	#2
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 1962 Suburban rear bumper They look to be real close. I think the rear actually wraps around a little bit further. But I think the bracket mounting holes are same. The stlye for both is the same. the rear does not have the cut out for the licence plate. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

09-04-2009, 12:12 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 1962 Suburban rear bumper Other than the hole spacing they are the same. Keep in mind though that the front bumper hole spacing is different between the '60-'62's and the '63-'66's. As for the rear bumper hole spacing I would have to verify if they are different in those same year groups. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-04-2009, 12:54 PM	#5
Muleman100 Registered User Join Date: Nov 2008 Location: Crosby, Texas Posts: 377	Re: 1962 Suburban rear bumper On building my 66 Burb I found the rear bumper bracket and holes are different from the front. Therefore I am looking for a rear bumper to finish my 66.

09-05-2009, 12:06 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 1962 Suburban rear bumper I measured my '60 GMC 4x4 Suburban frame at the rear and it is wider than a '63-'66 Suburban/Panel frame at the rear. So it appears that the '60-'62 Suburban/Panel rear bumper hole spacing is different than for the '63-'66's. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.