Help: Looking for: Tank Filler Neck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 09-08-2009, 09:02 AM

I have to replace my fuel tank on the Blazer. No help for it... I'm going to replace with a steel replacement but the filler tube has to be exchanged from the old to the new. Mine is rusted around the end and if I trim the bad spot out (shorten) it will be right on the bend. Yeah it will probably leak. I know that this will be a hard find, as no on likes cutting up gas tanks. But hey... gotta try!

Thanks, David

**jaros44sr** · 09-08-2009, 10:01 AM

Will JBWeld hold up under gas? Since ya gotta cut it off, you could braze or solder it

**D.PASSMORE** · 09-08-2009, 10:09 AM

I can make it work, one way or another. I'm just particular about repairs like this. I would like to just install a good filler neck on the repacement tank. Thanks for the suggestion though...

**jaros44sr** · 09-08-2009, 12:34 PM

Quote:

Originally Posted by D.PASSMORE

I can make it work, one way or another. I'm just particular about repairs like this. I would like to just install a good filler neck on the repacement tank. Thanks for the suggestion though...

Any muffler shops with a mandrel bender in Fla.?

JimmyFloyd · 09-08-2009, 12:39 PM

I have a tank I'm not going to use, but I don't think the fill tube is that long. I will check though. If it is, I'll hack it off for you.

**D.PASSMORE** · 09-08-2009, 01:22 PM

Quote:

Originally Posted by JimmyFloyd

I have a tank I'm not going to use, but I don't think the fill tube is that long. I will check though. If it is, I'll hack it off for you.

Jimmy, If its the original tank it will look exactly like the one in the picture. If you would, could you cut the tank and not the filler tube (pictured). I will desolder and solder in the new tank. In the picture, the partial rubber hose is still attached to end. Thanks

vtblazer · 09-08-2009, 06:51 PM

I sent that exact same patch out to someone a few years back, it happens.

JimmyFloyd · 09-08-2009, 10:44 PM

Huh, well what do you know? Make me an offer, and what is your time frame? I also need to make sure that the suburban tank I have won't need this, but I am pretty sure it won't.

**D.PASSMORE** · 09-09-2009, 06:38 AM

Jimmy, I think sub tanks are a little different, But thanks, PM'd you. DP

Mike C · 09-09-2009, 09:24 PM

Why not just cut it back and run a longer hose? Or am I missing something?

Edit: Oh, I should read closer... I' think it will be fine on the bend. Make up for not having the ridge to hold the hose anymore.

skidder111 · 09-14-2009, 05:36 PM

D.Passmore - PM me if you're stuck. I got an old tank out back, but it's a long way from your part of the woods. The neck is about the only good thing left on it.

**D.PASSMORE** · 09-14-2009, 06:04 PM

Will Do, Thank you.

bbarooo · 09-14-2009, 11:31 PM

I've got one going to the trash can but I think the filler is good. PM me if nothing works out for you.

09-08-2009, 09:02 AM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Help: Looking for: Tank Filler Neck I have to replace my fuel tank on the Blazer. No help for it... I'm going to replace with a steel replacement but the filler tube has to be exchanged from the old to the new. Mine is rusted around the end and if I trim the bad spot out (shorten) it will be right on the bend. Yeah it will probably leak. I know that this will be a hard find, as no on likes cutting up gas tanks. But hey... gotta try! Thanks, David Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-08-2009, 10:01 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Help: Looking for: Tank Filler Neck Will JBWeld hold up under gas? Since ya gotta cut it off, you could braze or solder it __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-08-2009, 10:09 AM	#3
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Help: Looking for: Tank Filler Neck I can make it work, one way or another. I'm just particular about repairs like this. I would like to just install a good filler neck on the repacement tank. Thanks for the suggestion though...

09-08-2009, 12:39 PM	#5
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Help: Looking for: Tank Filler Neck I have a tank I'm not going to use, but I don't think the fill tube is that long. I will check though. If it is, I'll hack it off for you. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-08-2009, 06:51 PM	#7
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Help: Looking for: Tank Filler Neck I sent that exact same patch out to someone a few years back, it happens.

09-08-2009, 10:44 PM	#8
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Help: Looking for: Tank Filler Neck Huh, well what do you know? Make me an offer, and what is your time frame? I also need to make sure that the suburban tank I have won't need this, but I am pretty sure it won't. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-09-2009, 06:38 AM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Help: Looking for: Tank Filler Neck Jimmy, I think sub tanks are a little different, But thanks, PM'd you. DP

09-09-2009, 09:24 PM	#10
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: Help: Looking for: Tank Filler Neck Why not just cut it back and run a longer hose? Or am I missing something? Edit: Oh, I should read closer... I' think it will be fine on the bend. Make up for not having the ridge to hold the hose anymore. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax Last edited by Mike C; 09-09-2009 at 09:25 PM.

09-14-2009, 05:36 PM	#11
skidder111 Registered User Join Date: Jan 2008 Location: Pincher Creek, Alberta, Canada Posts: 141	Re: Help: Looking for: Tank Filler Neck D.Passmore - PM me if you're stuck. I got an old tank out back, but it's a long way from your part of the woods. The neck is about the only good thing left on it.

09-14-2009, 06:04 PM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Help: Looking for: Tank Filler Neck Will Do, Thank you.

09-14-2009, 11:31 PM	#13
bbarooo Registered User Join Date: Sep 2004 Location: So. California Posts: 121	Re: Help: Looking for: Tank Filler Neck I've got one going to the trash can but I think the filler is good. PM me if nothing works out for you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.