rear shocks for a 94 short stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60ratrod · 09-16-2009, 07:04 PM

ok so i think that my rear shocks are shot cause i've been feeling the road way too much since i have had this truck. so i was wondering what the best shocks i can get for a tight budget. are the monroe shocks any good?? i'm not looking for a high performance shock or anything, but a good reliable shock that i would be able to get from one of the local parts houses

SCOTI · 09-16-2009, 07:13 PM

Monroe Sens-a-trac shocks seem to be a decent budget oriented part. KYB GR-2's or Bilsteins would be better if you can swing them w/your budget.

60ratrod · 09-17-2009, 06:57 PM

i just looked on summit and the kyb gr-2's are cheaper than the monroe sens-a-trac's. so i think that i will go with the kyb's

09-16-2009, 07:04 PM	#1
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	rear shocks for a 94 short stepside ok so i think that my rear shocks are shot cause i've been feeling the road way too much since i have had this truck. so i was wondering what the best shocks i can get for a tight budget. are the monroe shocks any good?? i'm not looking for a high performance shock or anything, but a good reliable shock that i would be able to get from one of the local parts houses __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

09-16-2009, 07:13 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: rear shocks for a 94 short stepside Monroe Sens-a-trac shocks seem to be a decent budget oriented part. KYB GR-2's or Bilsteins would be better if you can swing them w/your budget. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-17-2009, 06:57 PM	#3
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: rear shocks for a 94 short stepside i just looked on summit and the kyb gr-2's are cheaper than the monroe sens-a-trac's. so i think that i will go with the kyb's __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.