6.0 liter HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dentmaster · 09-24-2009, 09:55 PM

I recently bought a 6.0 for my 72 4X4 ...I want to stay with my factory 4sp manual tranny . Has anbody done this conversion? Can anybody give me imput, on what I am about to get into...any help would be appreciated!

72truckman · 09-24-2009, 10:07 PM

its a pretty straight forward swap if you keep the original tranny... other than all electronics and fuel system that accompany that motor. correct me if im wrong, but if you order the pilot bearing from ADVANCE ADAPTERS you can bolt up any stock chevy V8 transmission just fine with only one bolt that doesnt line up.

vtblazer · 09-25-2009, 05:57 AM

Subscribed.

Always been interested in doing a 6.0 swap.

tallhoedude · 09-25-2009, 07:41 AM

4.8,5.3,or 6.0 swaps are basically all the same.
i am running an sm465 with a newer style alum. bellhousing,hydro clutch setup.bushing in crank is just plain old sbc $5 brass bushing.i bought flywheel and clutch setup from advance adapters.simple and straightforward.

JimmyFloyd · 09-25-2009, 11:37 AM

subscribing as well. Been considering this one for a little bit now.

09-24-2009, 09:55 PM	#1
dentmaster Registered User Join Date: Jan 2007 Location: Cabot, Arkansas Posts: 72	6.0 liter HELP I recently bought a 6.0 for my 72 4X4 ...I want to stay with my factory 4sp manual tranny . Has anbody done this conversion? Can anybody give me imput, on what I am about to get into...any help would be appreciated!

09-24-2009, 10:07 PM	#2
72truckman Registered User Join Date: Mar 2006 Location: San Ramon, California Posts: 276	Re: 6.0 liter HELP its a pretty straight forward swap if you keep the original tranny... other than all electronics and fuel system that accompany that motor. correct me if im wrong, but if you order the pilot bearing from ADVANCE ADAPTERS you can bolt up any stock chevy V8 transmission just fine with only one bolt that doesnt line up. __________________ My 1972 Blazer 5.3 E85/ NV4500 5spd 4x4 Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=291482 **SOLD!!!!!** 1965 GMC 4X4 http://67-72chevytrucks.com/vboard/s...d.php?t=294727

09-25-2009, 05:57 AM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: 6.0 liter HELP Subscribed. Always been interested in doing a 6.0 swap.

09-25-2009, 07:41 AM	#4
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: 6.0 liter HELP 4.8,5.3,or 6.0 swaps are basically all the same. i am running an sm465 with a newer style alum. bellhousing,hydro clutch setup.bushing in crank is just plain old sbc $5 brass bushing.i bought flywheel and clutch setup from advance adapters.simple and straightforward. __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

09-25-2009, 11:37 AM	#5
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: 6.0 liter HELP subscribing as well. Been considering this one for a little bit now. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.