60/40's with belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oklahoma · 10-26-2009, 11:51 AM

I found some seats at the junk yard this weekend and deciced to get them, and some seatbelts, wish the belts were blue, oh well.

**Palf70Step** · 10-26-2009, 01:23 PM

That looks good in there. I had the same in my 70 (I went full bench now) and the belts. They are a great and very comfortable combo!!

bluesfella · 10-26-2009, 01:40 PM

How did you do the upper seatbelt mount?

Joemomma1 · 10-26-2009, 02:47 PM

Those look nice in there. If only there was a way to cover the plastic at the bottom.

Bears63 · 10-26-2009, 02:54 PM

Looks pretty good. What were the seats out of?

Oklahoma · 10-26-2009, 03:12 PM

1) Seats are out of a 88 extended cab.
2) I just drilled a 1/2" hole and used a backer plate for the upper seatbelt bracket.
3) On the bottom of the seat is the steel support, not plastic, and I can come up with a cover to close the hole if needed.
Thanks Guys

**Captainfab** · 10-27-2009, 12:09 AM

Those look good. Those '88 and up seats are pretty comfy.

Oklahoma · 10-27-2009, 10:10 AM

Yea, they feel good

ChevySixty6 · 10-27-2009, 02:18 PM

Could you elaborate some more on the shoulder belt mount near the door frame? How did you get a backer plate behind the interior sheetmetal? I've been wanting to do this on my '66, but have yet to figure it out, other than cutting and welding.

Oklahoma · 10-27-2009, 08:58 PM

I used a 7/16" bolt, put the bolt thru the seatbelt bracket, put a nut on just tight enough to let the bracket swing loose, then a flat washer. put that assemble thru the drilled hole, reached up the inside wall, added a backer plate, flat washer, lock washer, and nut.
Will this be strong enough in an acident, only one way too tell, and I dont plan on finding out.

ChevySixty6 · 10-28-2009, 09:27 AM

Thanks. That makes sense. I thought the attachment point was a lot farther up in the corner and just couldn't figure out how you got it there. Now i need to find some seats.

Oklahoma · 10-28-2009, 10:34 AM

Im 5'-11", and I went 3'-0" from the floor and I could just reach where I needed to. If you are taller you might want to go alittle higher.

10-26-2009, 11:51 AM	#1
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	60/40's with belts I found some seats at the junk yard this weekend and deciced to get them, and some seatbelts, wish the belts were blue, oh well. Attached Images

10-26-2009, 01:23 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,225	Re: 60/40's with belts That looks good in there. I had the same in my 70 (I went full bench now) and the belts. They are a great and very comfortable combo!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-26-2009, 01:40 PM	#3
bluesfella Registered User Join Date: Oct 2008 Location: Tallahassee, FL Posts: 53	Re: 60/40's with belts How did you do the upper seatbelt mount? __________________ www.vancerutherford.com

10-26-2009, 02:47 PM	#4
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 60/40's with belts Those look nice in there. If only there was a way to cover the plastic at the bottom.

10-26-2009, 02:54 PM	#5
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 60/40's with belts Looks pretty good. What were the seats out of? __________________ Mike "Bear" Shea

10-26-2009, 03:12 PM	#6
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts 1) Seats are out of a 88 extended cab. 2) I just drilled a 1/2" hole and used a backer plate for the upper seatbelt bracket. 3) On the bottom of the seat is the steel support, not plastic, and I can come up with a cover to close the hole if needed. Thanks Guys

10-27-2009, 12:09 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 60/40's with belts Those look good. Those '88 and up seats are pretty comfy. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-27-2009, 10:10 AM	#8
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts Yea, they feel good

10-27-2009, 02:18 PM	#9
ChevySixty6 Registered User Join Date: Feb 2009 Location: Topeka, Kansas Posts: 84	Re: 60/40's with belts Could you elaborate some more on the shoulder belt mount near the door frame? How did you get a backer plate behind the interior sheetmetal? I've been wanting to do this on my '66, but have yet to figure it out, other than cutting and welding. __________________ Members i've met: LiLRed66

10-27-2009, 08:58 PM	#10
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts I used a 7/16" bolt, put the bolt thru the seatbelt bracket, put a nut on just tight enough to let the bracket swing loose, then a flat washer. put that assemble thru the drilled hole, reached up the inside wall, added a backer plate, flat washer, lock washer, and nut. Will this be strong enough in an acident, only one way too tell, and I dont plan on finding out.

10-28-2009, 09:27 AM	#11
ChevySixty6 Registered User Join Date: Feb 2009 Location: Topeka, Kansas Posts: 84	Re: 60/40's with belts Thanks. That makes sense. I thought the attachment point was a lot farther up in the corner and just couldn't figure out how you got it there. Now i need to find some seats. __________________ Members i've met: LiLRed66

10-28-2009, 10:34 AM	#12
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts Im 5'-11", and I went 3'-0" from the floor and I could just reach where I needed to. If you are taller you might want to go alittle higher.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.