CPP or ECE?????????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southern C10 · 10-31-2009, 11:41 AM

Is there a difference or are both companies products the same? I am looking at the 69 SWB frame in the sales forum but wanted to make sure company was not better than the other. I was planning on using ECE stuff on my truck but if the products are the same it dosent matter.

Thanks.

68 short step · 10-31-2009, 11:49 AM

products are not the same....also ECE has customer service CPP has no customer service... my vote is ECE

**70cst** · 10-31-2009, 11:59 AM

Quote:

Originally Posted by 68 short step

products are not the same....also ECE has customer service CPP has no customer service... my vote is ECE

X2 as far as great service from ECE. JMHO

Southern C10 · 10-31-2009, 12:01 PM

Thanks guys. I am not so much worried about the customer service since the guy selling the frame has already bought the stuff. I am mainly concerned about the quality of the products. Heres the link to the sale.

http://67-72chevytrucks.com/vboard/s...d.php?t=369292

**70cst** · 10-31-2009, 01:01 PM

Hey Southern C10 ...did you get your spinners?

Southern C10 · 10-31-2009, 01:26 PM

Quote:

Originally Posted by 70cst

Hey Southern C10 ...did you get your spinners?

Yes Sir. Thank you for those and sorry I didnt reply when I got them.

nastyc10 · 10-31-2009, 01:37 PM

I also vote ECE.

cst350 · 10-31-2009, 02:22 PM

Cant say enough about ECE.

High quality and great knowledge!

big_al_71 · 10-31-2009, 02:33 PM

CPP parts are outstanding and sor are the parts from ECE....I bought from both and thank god all my parts from CPP showed up and were right on and ECE the samething but I have heard horror stories about CPP.

Tx Firefighter · 10-31-2009, 02:37 PM

There are literally countless stories on this board by folks who got poor service from CPP. Missing parts, wrong parts, slow shipping, it goes on and on. ECE, super service. I've been using them since the mid 90s. Very satisfied every time. You don't hear many/ any stories of ECE poor service.

my67chevytruck · 10-31-2009, 03:28 PM

Quote:

Originally Posted by Southern C10

Thanks guys. I am not so much worried about the customer service since the guy selling the frame has already bought the stuff. I am mainly concerned about the quality of the products. Heres the link to the sale.

http://67-72chevytrucks.com/vboard/s...d.php?t=369292

did you purchase the frame? I see that it has been sold.

Southern C10 · 10-31-2009, 03:37 PM

Quote:

Originally Posted by my67chevytruck

did you purchase the frame? I see that it has been sold.

No. I was working it when someone came by his house and bought it. Wasnt ment to be but I sure wish it wouldve been.

SCOTI · 10-31-2009, 04:52 PM

Since that set-up was already assembled, I definitely would have no qualms using CPP's stuff.

Since you didn't get it & might be in the market for parts, ECE definitely has much better customer service. I will only use CPP as a last resort.

**leddzepp** · 11-01-2009, 04:42 AM

Since you are not local, go with ECE.

jsbgump · 11-01-2009, 10:23 AM

ECE all the way

hemihead · 11-01-2009, 11:46 AM

I have spent upwards of $6k on parts from CPP, had some shipping issues a couple times with some back ordered parts but part quality is good.

John Gilbert · 11-01-2009, 01:21 PM

As a side note, there's two schools of thought on trailing arms. ECE box, and CPP tubular. I have ECE on my '66 C10 and CPP on my '79 C10 (trailing arm conversion kit). Haven't had a lick of trouble with either style. Both companies put out good products... that's my two-cents.

SCOTI · 11-01-2009, 05:50 PM

Quote:

Originally Posted by John Gilbert

As a side note, there's two schools of thought on trailing arms. ECE box, and CPP tubular. I have ECE on my '66 C10 and CPP on my '79 C10 (trailing arm conversion kit). Haven't had a lick of trouble with either style. Both companies put out good products... that's my two-cents.

More than a few guys asking about the truck-arm swap for 73-87's. Perhaps you'd step over into the suspension forum & post some pics, details, or just share your thoughts.

**lolife99** · 11-01-2009, 08:28 PM

Quote:

Originally Posted by John Gilbert

As a side note, there's two schools of thought on trailing arms. ECE box, and CPP tubular. I have ECE on my '66 C10 and CPP on my '79 C10 (trailing arm conversion kit). Haven't had a lick of trouble with either style. Both companies put out good products... that's my two-cents.

I'm also interested in the 73-87 "trailing arm conversion".
The 3rd source for "aftermarket" trailing arms is now Porterbuilt Street Rods!

**Tom Vogel** · 11-01-2009, 09:36 PM

ECE.... Im not saying the people at CPP arent OK... But ECE are the inventors, CPP are the copiers. Honest... just the simple truth.

John Gilbert · 11-02-2009, 08:22 AM

Quote:

Originally Posted by SCOTI

More than a few guys asking about the truck-arm swap for 73-87's. Perhaps you'd step over into the suspension forum & post some pics, details, or just share your thoughts.

The '79 Big 10 C10 I threw together for Rod & Custom's Americruise was the prototype for CPP's '73-87 trailing arm conversion kit. When I get back from SEMA I'll have more time to post, but in the meantime, please Google Custom Classic Trucks John Gilbert CPP Americruise trailing arms, and a ton of info will come up.

SCOTI · 11-02-2009, 10:21 AM

Quote:

Originally Posted by Tom Vogel

ECE.... Im not saying the people at CPP arent OK... But ECE are the inventors, CPP are the copiers. Honest... just the simple truth.

Where's ECE's truck-arm kit for 73-87's?

my67chevytruck · 11-02-2009, 10:33 AM

Quote:

Originally Posted by John Gilbert

The '79 Big 10 C10 I threw together for Rod & Custom's Americruise was the prototype for CPP's '73-87 trailing arm conversion kit. When I get back from SEMA I'll have more time to post, but in the meantime, please Google Custom Classic Trucks John Gilbert CPP Americruise trailing arms, and a ton of info will come up.

Link:

http://www.customclassictrucks.com/t...ive/index.html

10-31-2009, 11:41 AM	#1
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	CPP or ECE?????????? Is there a difference or are both companies products the same? I am looking at the 69 SWB frame in the sales forum but wanted to make sure company was not better than the other. I was planning on using ECE stuff on my truck but if the products are the same it dosent matter. Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

10-31-2009, 11:49 AM	#2
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: CPP or ECE?????????? products are not the same....also ECE has customer service CPP has no customer service... my vote is ECE

10-31-2009, 12:01 PM	#4
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: CPP or ECE?????????? Thanks guys. I am not so much worried about the customer service since the guy selling the frame has already bought the stuff. I am mainly concerned about the quality of the products. Heres the link to the sale. http://67-72chevytrucks.com/vboard/s...d.php?t=369292 __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

10-31-2009, 01:01 PM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: CPP or ECE?????????? Hey Southern C10 ...did you get your spinners? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-31-2009, 01:37 PM	#7
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: CPP or ECE?????????? I also vote ECE.

10-31-2009, 02:22 PM	#8
cst350 Registered User Join Date: Dec 2003 Location: nor cal Posts: 219	Re: CPP or ECE?????????? Cant say enough about ECE. High quality and great knowledge!

10-31-2009, 02:33 PM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: CPP or ECE?????????? CPP parts are outstanding and sor are the parts from ECE....I bought from both and thank god all my parts from CPP showed up and were right on and ECE the samething but I have heard horror stories about CPP. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-31-2009, 02:37 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: CPP or ECE?????????? There are literally countless stories on this board by folks who got poor service from CPP. Missing parts, wrong parts, slow shipping, it goes on and on. ECE, super service. I've been using them since the mid 90s. Very satisfied every time. You don't hear many/ any stories of ECE poor service. __________________ I'm on the Instagram- @Gearhead_Kevin

10-31-2009, 04:52 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,094	Re: CPP or ECE?????????? Since that set-up was already assembled, I definitely would have no qualms using CPP's stuff. Since you didn't get it & might be in the market for parts, ECE definitely has much better customer service. I will only use CPP as a last resort. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-01-2009, 04:42 AM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,059	Re: CPP or ECE?????????? Since you are not local, go with ECE. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-01-2009, 10:23 AM	#15
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: CPP or ECE?????????? ECE all the way __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-01-2009, 11:46 AM	#16
hemihead Registered User Join Date: Mar 2007 Location: Estevan, Sask, Canada Posts: 185	Re: CPP or ECE?????????? I have spent upwards of $6k on parts from CPP, had some shipping issues a couple times with some back ordered parts but part quality is good. __________________ 1967 SWB C-10, BBC 454, T400, 3.73 posi, 20" Coys 1972 K5 Blazer, SBC 400, 4 spd, 3.73, 6" lift, 35" mud grapplers 2011 Sierra Denali HD, 6.6 L Duramax, RBP 96R rims, leveled and Nitto trail grapplers, 2009 Acura MDX

11-01-2009, 01:21 PM	#17
John Gilbert Registered User Join Date: Sep 2009 Location: Placentia, California Posts: 567	Re: CPP or ECE?????????? As a side note, there's two schools of thought on trailing arms. ECE box, and CPP tubular. I have ECE on my '66 C10 and CPP on my '79 C10 (trailing arm conversion kit). Haven't had a lick of trouble with either style. Both companies put out good products... that's my two-cents.

11-01-2009, 09:36 PM	#20
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: CPP or ECE?????????? ECE.... Im not saying the people at CPP arent OK... But ECE are the inventors, CPP are the copiers. Honest... just the simple truth.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.