4 link !

[78-5.3]

Originally Posted by 68 TT

The popular one with leaf spring drag cars is the Rancho RS9000X adjustable one. About $90 each.

http://www.calvertracing.com/rancho.php

I plan on getting a set to replace the generic adjustable ones on my car now.

I have heard good things about the Edelbrock Performer IAS shocks but have never used them myself.

i was thinking more of a coil over shock something that would hold the weight with the leafs gone?

[68 TT]

Originally Posted by 78-5.3

i was thinking more of a coil over shock something that would hold the weight with the leafs gone?

I ran these on my 70 Chevelle and was very impressed with them. Not cheap but very nice.

http://qa1.thomasnet.com/item/pro-dr...10&plpver=1001

General info: http://www.qa1.net/qa1_motorsports/

I found this while looking for the QA1 info

http://www.kw-suspension.com/us/kw_p...nPage=coilover

[hotrodrookie]

If you like this setup and want the bars on the inside, just swap the front brackets so the origninal left front bracket is on the inside of the right framrail and vise-versa. Just box in the frame rail (after you weld the nuts on the backsides of the holes)and weld the bars inside the fraimrail. If your lower shock mounts are too close then you could weld in new lower mounts if it is a problem.

Originally Posted by 78-5.3

does anyone now where i can buy a 4 -link kit with the 4 bars rod ends and brackets!!! that i could fit to my truck im not interested in the air ride suspension ! this one from brothers is what im looking for but i want the 4 bars to be on the inside of the rail anyone personal installed one of these kits ?? pics ideas i want the install it on the inside for a massive tire !!!