1980 chevy long bed!

[Dudewith4x4]

Im only 16.

[jgh64pkup]

remember im 15
but we got out of school last week

[Dudewith4x4]

Cause your lucky.. Tommorrow is our last day. lol.

[jgh64pkup]

haha that sucks
when do you go back

[Dudewith4x4]

4th..

[jgh64pkup]

so do we
we had half days thursday and friday

[Dudewith4x4]

Lucky...

[jgh64pkup]

haha
dang your already at 85 posts look at you go

[2tons of fun]

Originally Posted by 2tons of fun

it doesnt have 3/4t in the pics.......

and a 3/4t front is the same as a 1/2t.

Originally Posted by Dudewith4x4

what?

you said it or you have 3/4t axles for it.

the truck does nto have 3/4t axles in the pic.

a 3/4t d44 is exactly the same axle shafts as a 1/2t, there is absolutely no gain in swaping in a front 3/4t other than matching wheel patterns.


and if you flip the little arms down and put a load on it you are going to bend your axles.

those little arms are going to keep the suspension from squating but are going to do absolutely nothing for axle wrap which is the real parts buster.

[Dudewith4x4]

What do you suggest then?

[Dudewith4x4]

PICS!!

Heres the Manifold Im going to buy. Needs some cleaning but getting a good deal I think



Heres The rust on the Rocker panel That Im gonna fix in auto body before to long..
(notice the carpet thats in it... Lol )



Heres the Interior.. (Being replaced... Any suggestions comment.)



Engine pics!! No edelbrock manifold.. I was lied to.. But it had a four barrel carb still.



Andd...





Heres the other 327 Im gonna pull and rebuild.. Parts wise What should I get? Its got 283 heads..

[jgh64pkup]

hey thats a quadrajet
and i say keep the bucket seats and get em recovered
and keep the steering wheel

[Dudewith4x4]

Whats a Quadraject? ehh?

I wanna bench. I like the girl freind in the middle to much. lol. I may sell the buckets.

I love the Steering wheel. Maybe stain it?

[Chlsnk]

That holley Hi-rise intake will be a million times better than that stock intake. The 283 heads are most likely power pack heads (they have two triangles cast in the side of them ^^) or a set of "doublehump" heads which have two humps cast in the side of them.


EDIT****
So what kind of car is that other 327 in?

[jgh64pkup]

Originally Posted by Chlsnk

That holley Hi-rise intake will be a million times better than that stock intake. The 283 heads are most likely power pack heads (they have two triangles cast in the side of them ^^) or a set of "doublehump" heads which have two humps cast in the side of them.

or the powerpack heads can have a single triangle cast in them like in his picture
heres a link to some info http://www.hotrodders.com/forum/powe...eads-3692.html

[Dudewith4x4]

The other 327 is in my dads 1 ton gmc haytruck he bought when he was 18(hes 50 now) and its been sitting since he was 20-30. So Its gonna take some work. Im pretty sure there power pack heads..

chlsnk- The holley high rise comes with a edelbrock 600 carb... All for only 150 dollars.

[Dudewith4x4]

So chlsnk are you telling me they are good heads cause gage told me they arent worth working on and to buy new ones. I think Im beleiving gage. No ofenense.

[Chlsnk]

Powerpack heads dont flow worth a s*** and are pretty much worthless except for mabey a nostalgia hotrodder. The double hump heads flow pretty decent for being a stock head but you would be much better off finding a set of vortec heads which flow 10x better than the double humps.
Double humps also dont have any acc holes soo you are limited there too.

I'm going to run a set of double humps for now because I have a set in amazing condition with 2.02/1.6 valves and all Im going to do it clean up some of the casting burrs and throw a set of roller tip rockers on them. These heads will flow much better than the smog 305 heads i'm running now.

If I were you I'd save up for a set of good aftermarket heads.

Slap a set of 1.5/1.6 roller rockers on these edelbrock heads http://www.summitracing.com/parts/EDL-5073/ and you could really unleash that 327 for about $1000 thats a killer deal!

[Dudewith4x4]

lol yeah I looked at these same heads the other day.. Dam 1000 dollars.. Thats more than I paid for the truckk..

[jgh64pkup]

well do you want power?

[Dudewith4x4]

Yeeahhh... And I need money though. Like I said Gage I need to go search the salvage yard for treasures.. Maybe today.. Im lazy though.

[72BlckButy]

Check the local yards and swap meets for some real nice deals on parts. Heck check the Parts board on the board.

Looks like a fun project, and my vote would be for gunmetal grey!

[Dudewith4x4]

Thanks! I was thinking the same.

[Chlsnk]

With trucks you gotta pay to play.

[jgh64pkup]

exactly thats why my truck still looks the same as it did 6 months ago