factory oil pressure gauge 60lb ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tjsblazer · 01-05-2010, 02:39 PM

Was the standard oil pressure gauge for a 350 engine 60lbs on a 72 Blazer ??

turp mcspray · 01-05-2010, 03:28 PM

Yes. Small blocks are 60 and big blocks are 80.

Firebirdjones · 01-05-2010, 03:42 PM

I wasn't aware of numbers on the 70-72 gauges, and didn't know bigblocks were part of the blazer line.
I can tell you my 72 blazer oil pressure gauge does coincide with a hand held mechanical gauge I had T'd into just for a comparison. And when the factory gauge was pegged it matched very close to the 60 lbs. mark on my handheld.

My 79 pickup with a factory 454 doesn't have an 80lbs. gauge either. Neither did the 77 bigblock I had before that. They were also all 60 lbs. gauges,,,with actual numbers on the gauge in those years.

71swb4x4 · 01-05-2010, 04:07 PM

Quote:

Originally Posted by Firebirdjones

I wasn't aware of numbers on the 70-72 gauges, and didn't know bigblocks were part of the blazer line.

67-72 gauges do not have numbers on the face, but they do utlilize the two different gauges, 60 and 80 lb.
you are right, no BB in Blazers but lots of gauge panels swapped in and out so you may have an 80 where a 60 would have been stock.

Firebirdjones · 01-05-2010, 04:10 PM

Quote:

Originally Posted by 71swb4x4

67-72 gauges do not have numbers on the face, but they do utlilize the two different gauges, 60 and 80 lb.
you are right, no BB in Blazers but lots of gauge panels swapped in and out so you may have an 80 where a 60 would have been stock.

That's true with all the swapping on these things over the last 40 years.

With that said then the original posters best bet is to do what I did, and temporarily hook another mechanical gauge up just to see how it reads in comparison.

turp mcspray · 01-05-2010, 09:56 PM

Sorry for the confusion. My post was a general, "across the board" statement in regards to the entire 67-72 body style. If you pull the gauge out of the panel you will see where it says 60 or 80lb. I believe they used a 60lb in all applications from 73 up.

Firebirdjones · 01-06-2010, 01:42 PM

Quote:

Originally Posted by turp mcspray

Sorry for the confusion. My post was a general, "across the board" statement in regards to the entire 67-72 body style. If you pull the gauge out of the panel you will see where it says 60 or 80lb. I believe they used a 60lb in all applications from 73 up.

Oooops, my bad. I gotcha now.

tjsblazer · 01-06-2010, 07:54 PM

Thanks for the responses. I see now where when removed it is printed on the lower face. 80lb might be the way to go with fresh higher performance 383 always seems to peg the guage full over.

Quote:

Originally Posted by turp mcspray

Sorry for the confusion. My post was a general, "across the board" statement in regards to the entire 67-72 body style. If you pull the gauge out of the panel you will see where it says 60 or 80lb. I believe they used a 60lb in all applications from 73 up.

**too much stuff** · 01-06-2010, 08:43 PM

I think the 80 pound gauges were found in the C-40 and bigger trucks. I believe everything from C-10-C-30 was a 60 pound regardless of engine size.

**jaros44sr** · 01-06-2010, 09:34 PM

I hope my oil gauge never goes bad, don't know if I can lift a 60lb. gauge up into my dash, let alone an 80 lb. one

Critter · 01-06-2010, 09:38 PM

Quote:

Originally Posted by jaros44sr

I hope my oil gauge never goes bad, don't know if I can lift a 60lb. gauge up into my dash, let alone an 80 lb. one

toolboxchev · 09-14-2018, 03:41 AM

Quote:

Originally Posted by Critter

Yea I am getting to old for that also! Hope the original goes another 50!

01-05-2010, 02:39 PM	#1
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	factory oil pressure gauge 60lb ?? Was the standard oil pressure gauge for a 350 engine 60lbs on a 72 Blazer ?? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

01-05-2010, 03:28 PM	#2
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: factory oil pressure gauge 60lb ?? Yes. Small blocks are 60 and big blocks are 80. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

01-05-2010, 03:42 PM	#3
Firebirdjones Registered User Join Date: Oct 2009 Location: Prescott, Arizona Posts: 2,396	Re: factory oil pressure gauge 60lb ?? I wasn't aware of numbers on the 70-72 gauges, and didn't know bigblocks were part of the blazer line. I can tell you my 72 blazer oil pressure gauge does coincide with a hand held mechanical gauge I had T'd into just for a comparison. And when the factory gauge was pegged it matched very close to the 60 lbs. mark on my handheld. My 79 pickup with a factory 454 doesn't have an 80lbs. gauge either. Neither did the 77 bigblock I had before that. They were also all 60 lbs. gauges,,,with actual numbers on the gauge in those years.

01-05-2010, 09:56 PM	#6
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: factory oil pressure gauge 60lb ?? Sorry for the confusion. My post was a general, "across the board" statement in regards to the entire 67-72 body style. If you pull the gauge out of the panel you will see where it says 60 or 80lb. I believe they used a 60lb in all applications from 73 up. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

01-06-2010, 08:43 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: factory oil pressure gauge 60lb ?? I think the 80 pound gauges were found in the C-40 and bigger trucks. I believe everything from C-10-C-30 was a 60 pound regardless of engine size. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-06-2010, 09:34 PM	#10
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: factory oil pressure gauge 60lb ?? I hope my oil gauge never goes bad, don't know if I can lift a 60lb. gauge up into my dash, let alone an 80 lb. one __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-06-2010 at 09:35 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.