AVS? Airride manual valves? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68laydout · 01-08-2010, 12:45 PM

Can you post up some pics and pricing? Also any info you can share about them. Appreciate it! Cory

68laydout · 01-08-2010, 12:47 PM

This was meant for Jason. I was going to PM, but I know others are interested also.

AVS_JASON · 01-08-2010, 01:53 PM

AVS_JASON · 01-08-2010, 01:53 PM

AVS_JASON · 01-08-2010, 01:54 PM

AVS_JASON · 01-08-2010, 01:57 PM

I don't have any pics of the switch by itself, but you can get a good idea of them. They are very easy to use and are a nice slow speed. I believe they go for about $30 each. I have them on the back of my truck and when I do the front, I will be putting them on there too. I used them because I wanted something very controllable.

Hope this helps...

68laydout · 01-08-2010, 02:41 PM

Quote:

Originally Posted by AVS_JASON

I don't have any pics of the switch by itself, but you can get a good idea of them. They are very easy to use and are a nice slow speed. I believe they go for about $30 each. I have them on the back of my truck and when I do the front, I will be putting them on there too. I used them because I wanted something very controllable.

Hope this helps...

Thanks brother! I'll be in touch. Cory

Tagg33 · 01-11-2010, 10:54 PM

I can't even get the AVS website to pull up, after several seconds of it trying to load the site it times out. How much does the whole thing cost that you pictured above? My brother put airbags on his trailer and I was telling him about these manual valves.

S10Fan · 01-12-2010, 07:11 AM

Jason....

Tell me about the "Auto Pilot" from Air Lift. I see you guys sell them, pros cons etc.

Thanks!

AVS_JASON · 01-12-2010, 12:08 PM

Quote:

Originally Posted by Tagg33

I can't even get the AVS website to pull up, after several seconds of it trying to load the site it times out. How much does the whole thing cost that you pictured above? My brother put airbags on his trailer and I was telling him about these manual valves.

That set up I made for my actual truck. It will control all four bags independently. It runs about $200. If you bought all the pieces separately, would be about $260.

AVS_JASON · 01-12-2010, 12:22 PM

Quote:

Originally Posted by S10Fan

Jason....

Tell me about the "Auto Pilot" from Air Lift. I see you guys sell them, pros cons etc.

Thanks!

My honest opinion. There are better kits out there. Don't get me wrong, the auto pilot is a good kit with a lot of nice features. The only problem that I see with this kit, is that it self adjusts by air pressure. So for instance, if your ride height set at 120 psi and that keeps you at 6 inches off the ground. Then someone gets in your vehicle, and their weight drops your truck an inch, but raises your psi level to say 140. Now the auto pilot is going to drop the pressure back to 120psi. Which in turn drops your truck another inch. Now your ride height is two inches lower then you had it set at. This can easily be corrected with a tap of the over ride button, but you would be doing this every time more weight is added to your vehicle. The cool thing about this kit though, is that it has a digital read out of all your bags and your tank. So you can keep an eye on the pressure in your entire system.
Hope that kinda helped, let me know if you need any more info.

redsled04 · 01-12-2010, 09:30 PM

Manual valves. pretty cool kinda old school as far as air ride goes.I like it.I thought about doing this to.

Rokcrln · 01-12-2010, 11:18 PM

Yes I ordered a simmular set up for a customer build from FBI who accepted my payment then never shipped half my order and went out of business

So I need 2 more sets but only with one gauge and two switches per set. It will be for a front rear control on 2 different vehicles. What kind of price am I looking at and do you have them in stock ready to ship?

Kevin
LFD Inc.

AVS_JASON · 01-13-2010, 11:30 AM

Quote:

Originally Posted by Rokcrln

Yes I ordered a simmular set up for a customer build from FBI who accepted my payment then never shipped half my order and went out of business

So I need 2 more sets but only with one gauge and two switches per set. It will be for a front rear control on 2 different vehicles. What kind of price am I looking at and do you have them in stock ready to ship?

Kevin
LFD Inc.

PM sent....

AVS_JASON · 01-13-2010, 11:34 AM

Quote:

Originally Posted by redsled04

Manual valves. pretty cool kinda old school as far as air ride goes.I like it.I thought about doing this to.

I really like them. All my other truck have been done with 1/2" or 3/4" valves and line. And I've kinda grew out of that hopping stage. Lol. They are very controllable and not too slow and not fast. I was actually sitting next to a cop driving home and was super low. I was able to lift my truck to nearly stock while he was there and never even knew. I thought that was pretty funny...

redsled04 · 01-15-2010, 10:07 PM

I agree about the hopping as i get older i still want to roll low.But im not to wooried about it going up so fast or down.

FRENCHBLUE72 · 01-17-2010, 02:54 PM

Quote:

Originally Posted by AVS_JASON

Is this sold as is or do you have to piece all the parts together? Id buy one of these if it comes as one complete unit..

AVS_JASON · 01-19-2010, 05:23 PM

Quote:

Originally Posted by FRENCHBLUE72

Is this sold as is or do you have to piece all the parts together? Id buy one of these if it comes as one complete unit..

They are sold in pieces, but I have this unit here because I am not ready to install it all yet. So if you want this exact one, I can let you have it complete. Just let me know...

jjjmm56 · 01-19-2010, 11:42 PM

Can these be stepped up to 3/8 after the control ? I've allready run 3/8 lines and fittings.

AVS_JASON · 01-20-2010, 11:18 AM

Quote:

Originally Posted by jjjmm56

Can these be stepped up to 3/8 after the control ? I've allready run 3/8 lines and fittings.

Yes, it will just take a few more fittings, but it can be stepped up to 3/8".

glendale · 01-27-2010, 10:56 PM

so i'm new to this whole thing. would this eliminate all of the electric components? besides the compressor?

FRENCHBLUE72 · 01-27-2010, 11:18 PM

have not forgotten about you am just waitin for pay day

SCOTI · 01-27-2010, 11:33 PM

Quote:

Originally Posted by glendale

so i'm new to this whole thing. would this eliminate all of the electric components? besides the compressor?

Yep. Air in from tank; air out to bag (w/a T-fitting to a 1/8" airline for the gauge). It purges the air from the bags @ the paddle switch.

Items needed are:
Compressor(s)
tank(s)
paddles switches
dual needle gauges
airline

63 extreme low · 01-28-2010, 04:10 AM

Quote:

Originally Posted by AVS_JASON

Want one!! Wish it was Christmas I know what I would ask for!!

91Subbed · 01-10-2012, 12:03 PM

Will these work for a front only set up? I have bags brackets 1/2 air lines tank and compressor I just need to know where to go from here? Manual valves sounds easy and cheaper! Thanks for the help!
Posted via Mobile Device

01-08-2010, 12:45 PM	#1
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	AVS? Airride manual valves? Can you post up some pics and pricing? Also any info you can share about them. Appreciate it! Cory

01-08-2010, 12:47 PM	#2
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: AVS? Airride manual valves? This was meant for Jason. I was going to PM, but I know others are interested also.

01-08-2010, 01:53 PM	#3
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: AVS? Airride manual valves?

01-08-2010, 01:53 PM	#4
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: AVS? Airride manual valves?

01-08-2010, 01:54 PM	#5
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: AVS? Airride manual valves?

01-08-2010, 01:57 PM	#6
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: AVS? Airride manual valves? I don't have any pics of the switch by itself, but you can get a good idea of them. They are very easy to use and are a nice slow speed. I believe they go for about $30 each. I have them on the back of my truck and when I do the front, I will be putting them on there too. I used them because I wanted something very controllable. Hope this helps...

01-11-2010, 10:54 PM	#8
Tagg33 Registered User Join Date: Mar 2007 Location: Denver, CO Posts: 247	Re: AVS? Airride manual valves? I can't even get the AVS website to pull up, after several seconds of it trying to load the site it times out. How much does the whole thing cost that you pictured above? My brother put airbags on his trailer and I was telling him about these manual valves. __________________ Ryan 84 SWB, C4 IFS Crossmember, C4 IRS, RE7 bags, WCC 3pc 22"s My reBuild: http://67-72chevytrucks.com/vboard/s...d.php?t=346328

01-12-2010, 07:11 AM	#9
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: AVS? Airride manual valves? Jason.... Tell me about the "Auto Pilot" from Air Lift. I see you guys sell them, pros cons etc. Thanks! __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

01-12-2010, 09:30 PM	#12
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: AVS? Airride manual valves? Manual valves. pretty cool kinda old school as far as air ride goes.I like it.I thought about doing this to.

01-12-2010, 11:18 PM	#13
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: AVS? Airride manual valves? Yes I ordered a simmular set up for a customer build from FBI who accepted my payment then never shipped half my order and went out of business So I need 2 more sets but only with one gauge and two switches per set. It will be for a front rear control on 2 different vehicles. What kind of price am I looking at and do you have them in stock ready to ship? Kevin LFD Inc.

01-15-2010, 10:07 PM	#16
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: AVS? Airride manual valves? I agree about the hopping as i get older i still want to roll low.But im not to wooried about it going up so fast or down.

01-19-2010, 11:42 PM	#19
jjjmm56 Registered User Join Date: Jan 2009 Location: kissimmee Florida Posts: 494	Re: AVS? Airride manual valves? Can these be stepped up to 3/8 after the control ? I've allready run 3/8 lines and fittings.

01-27-2010, 10:56 PM	#21
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: AVS? Airride manual valves? so i'm new to this whole thing. would this eliminate all of the electric components? besides the compressor?

01-27-2010, 11:18 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: AVS? Airride manual valves? have not forgotten about you am just waitin for pay day __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-10-2012, 12:03 PM	#25
91Subbed Registered User Join Date: Dec 2011 Location: Arlington Tx Posts: 182	Re: AVS? Airride manual valves? Will these work for a front only set up? I have bags brackets 1/2 air lines tank and compressor I just need to know where to go from here? Manual valves sounds easy and cheaper! Thanks for the help! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.