Trying to identify ece springs. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971gmcshortbed · 01-13-2010, 01:50 AM

Hi I have a set of springs on the front of my 71, I purchased them a long time ago. I believe they are ece springs. The number on them is 6102-1. My spindles are belltech 3120 which I did find out is a 3" drop.
I searched the ece website and catalog but I cant seem to find these springs.
Does anyone know what drop they are? My farme is bare with no weight so
it is difficult to tell. Thank you.

1971gmcshortbed · 01-13-2010, 10:04 AM

Ok, so I was mixed up. There are cpp 1" springs I just looked on the website. Combined with the Belltech 3120 that should give me a 4" drop? Is that enough???

01-13-2010, 01:50 AM	#1
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Trying to identify ece springs. Hi I have a set of springs on the front of my 71, I purchased them a long time ago. I believe they are ece springs. The number on them is 6102-1. My spindles are belltech 3120 which I did find out is a 3" drop. I searched the ece website and catalog but I cant seem to find these springs. Does anyone know what drop they are? My farme is bare with no weight so it is difficult to tell. Thank you.

01-13-2010, 10:04 AM	#2
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: Trying to identify ece springs. Ok, so I was mixed up. There are cpp 1" springs I just looked on the website. Combined with the Belltech 3120 that should give me a 4" drop? Is that enough???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.