UPDATED! Info on gauge pods for our trucks... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigAlVB · 04-30-2003, 04:14 PM

Hello all! The company I contacted is Lo-tek, Inc. a firm which only produces gauge pods for vehicles. Check 'em out at www.gaugepods.com.

Min. order is 30 per project. If we want three pod units, we need 30 orders. If we want two pod units, we need thirty orders. As I understand it, we can't mix and match different orders. All orders must be prepaid for project to start. Pricing will be determined after receipt of OEM pillar. Most of their pods range from $40-$60. AFTER PROJECT IS COMPLETE THE PRICE WILL INCREASE. In other words, if you don't get in on the preorder, you may pay more in the future.

I would send in the OEM pillar out of my Suburban. Is anyone positive that the pillars are EXACTLY the same on the '91 Subs and the rest of the '73-'87 trucks? Need to know for sure. I figure we'll have them made for standard 2 1/16" gauges because of many gauges from many manufacturer's in this size. My interior is dark blue, they will make up to three colors but will then need donor pillars to do color matches. My pillar would be sacrificed, which is fine with me because it has a crack at the top anyway.

I would be the "project leader". IE, all info channels through me so they don't have numerous people to contact. Total time from receipt of final preorder would be two to two and a half months (approx). I won't get any special pricing or favors for being the project leader, just all the headaches

.

It's up to all of you. Let me know if you're interested. I think this will be killer. I would like a three gauge pod. Respond here if you're in and we'll get going. I'll have to send in my a-pillar first to get definite pricing if at least 30 people will confirm interest.

cochino12 · 04-30-2003, 04:23 PM

I'm definitley in but for dual gauge only!!

J-Spec C10 · 04-30-2003, 05:05 PM

Ok, I'm totally interested. but is it for a complete pillar cover, or a pod that mounts to the pillar cover? I'm in for a two gauge pod too.

**Captkaos** · 04-30-2003, 05:16 PM

All years will swap, but there are differences.

PHOENIX · 04-30-2003, 05:44 PM

I would be interested, but I would want to see pictures first, which doesnt sound possible.
Also for that $40-60 would we be getting only the drivers side, or would we get both sides, but only the drivers has pods?
If we dont get both sides Im probly not interested, but we'll see.
a (2) Gauge pod that holds 2-1/16" gauges sounds fine to me.

How much does a stock pillar cover go for?
No catalogs here at work

Tom · 04-30-2003, 07:11 PM

two guage pods? What are you guys thinking? There are so many guages these trucks need added! Heck, I already have 4 gauges just sitting in the cab on the dash of my 79 with nowhere to put em

But it looks like everyone wants two guage pods. Ill take a 3 if we get enough people, a two if thats all we can do.

LOHRTBT · 04-30-2003, 07:13 PM

i dont think I have ever seen a gauge pod for the passenger side....lol just have someone build you some fiberglass speaker housings if that is what you want.

apstguy · 04-30-2003, 08:03 PM

I want a two pod. Three if you want but it looks like only the two will get enough people. I want it in black - what color does everyone else want?

CT-Truckster · 04-30-2003, 10:57 PM

put me down for the three gauge pod first, if can't get enough for the three pod then i guess i'll settle for the two pod.
i been wanting one of these for a long time.
ohh and i think the difference may be whenever they changed the dash pad. i was gonna put the pillar trim outta my 76 in my 84, it fit but it was diferent down where it met the dash and didn't fit the dash right. was 81 the first year of the change for the dash pads?

jon_volk · 04-30-2003, 11:25 PM

id be down for a two guager.

RockHQ · 05-01-2003, 08:06 AM

Count me in! 3-pod if possible, but anything goes, colour or pod-wise

1987 Shortwide · 05-01-2003, 03:25 PM

I am a possible, I had already made a guage plate like mikes where the stereo goes, but its not in yet....let me think on it for a few days and I will get back with you.

ponjohn · 05-01-2003, 04:18 PM

count me in for a two guage.

Black is fine with me. Currently have a maroon interior but switching to grey at some point...........john

cochino12 · 05-01-2003, 04:24 PM

Quote:

Originally posted by 1987 Shortwide
I am a possible, I had already made a guage plate like mikes where the stereo goes, but its not in yet....let me think on it for a few days and I will get back with you.

Got any pics of that?

Mike76251 · 05-01-2003, 04:55 PM

....

Cole's 87 · 05-01-2003, 06:49 PM

I'm in for a two or a three which ever I can get first. Black in color. How are we going to pay. Send all our money to Big AlVB or pay LO-Tec. directly

J-Spec C10 · 05-01-2003, 11:17 PM

good point... suggestions?

BigAlVB · 05-02-2003, 09:05 AM

Well, first we need the thirty preorders--we're slowly on our way there. It looks like the two gauge pod is the choice of most, so that's most likely what we'll get, if we can meet the minimum amt. req'd to preorder.
I'll have to send my A-pillar in first so we know exactly what the cost will be. I figured I'd send all the money in together, through me as the "project leader", as they only want one point of contact to simplify matters on their end. Now, I'm fairly new here so I can understand if there's some hesitation on the part of anyone to send me the money. That's understandable--and smart. But if everyone sends a USPS money order or something like that, it can be tracked and the US Postal Service takes that fraud very seriously. The Postal Inspectors would track me down very quickly. Now, I can also e-mail Lo-tek again and see if its possible for ya'll to either PayPal your moey to them, use credit cards, etc. Let me know what you're thinking.
Keep up the good work. We need more preorders spoken for--AT LEAST thirty. REMEMBER: The price will most likely go up once this becomes a normal item. We can have 30+ preorders with no problem.

CT-Truckster · 05-02-2003, 07:08 PM

cool, i'm serious about ordering one myself. if it takes me placing a preorder with them directly or through you whatever i'll do it. just keep us informed

mike63078 · 05-02-2003, 08:11 PM

How do i pre order?

apstguy · 05-02-2003, 08:50 PM

To pre-order, just say what style and color on this thread, and your good to go if we get 30 orders.

For the members on other boards too - post this on other boards so we can get enough people - just this forum might not be enough, so SPREAD THE WORD!

mike63078 · 05-02-2003, 08:52 PM

a 2 gauge is what i would like in blue though i can dye it my self and if i had to get a 3 i would

cochino12 · 05-10-2003, 11:31 AM

anyone else? I really want one

Bobs76 · 05-10-2003, 04:44 PM

Whats the count up to so far?

gchemist · 05-10-2003, 11:20 PM

I'm in for a two pod. Common color okay. It will be repainted anyway.

04-30-2003, 04:14 PM	#1
BigAlVB Registered User Join Date: Mar 2003 Location: Holland, MI Posts: 74	UPDATED! Info on gauge pods for our trucks... Hello all! The company I contacted is Lo-tek, Inc. a firm which only produces gauge pods for vehicles. Check 'em out at www.gaugepods.com. Min. order is 30 per project. If we want three pod units, we need 30 orders. If we want two pod units, we need thirty orders. As I understand it, we can't mix and match different orders. All orders must be prepaid for project to start. Pricing will be determined after receipt of OEM pillar. Most of their pods range from $40-$60. AFTER PROJECT IS COMPLETE THE PRICE WILL INCREASE. In other words, if you don't get in on the preorder, you may pay more in the future. I would send in the OEM pillar out of my Suburban. Is anyone positive that the pillars are EXACTLY the same on the '91 Subs and the rest of the '73-'87 trucks? Need to know for sure. I figure we'll have them made for standard 2 1/16" gauges because of many gauges from many manufacturer's in this size. My interior is dark blue, they will make up to three colors but will then need donor pillars to do color matches. My pillar would be sacrificed, which is fine with me because it has a crack at the top anyway. I would be the "project leader". IE, all info channels through me so they don't have numerous people to contact. Total time from receipt of final preorder would be two to two and a half months (approx). I won't get any special pricing or favors for being the project leader, just all the headaches . It's up to all of you. Let me know if you're interested. I think this will be killer. I would like a three gauge pod. Respond here if you're in and we'll get going. I'll have to send in my a-pillar first to get definite pricing if at least 30 people will confirm interest.

04-30-2003, 05:05 PM	#3
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Ok, I'm totally interested. but is it for a complete pillar cover, or a pod that mounts to the pillar cover? I'm in for a two gauge pod too. __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

04-30-2003, 05:16 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	All years will swap, but there are differences. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-30-2003, 05:44 PM	#5
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I would be interested, but I would want to see pictures first, which doesnt sound possible. Also for that $40-60 would we be getting only the drivers side, or would we get both sides, but only the drivers has pods? If we dont get both sides Im probly not interested, but we'll see. a (2) Gauge pod that holds 2-1/16" gauges sounds fine to me. How much does a stock pillar cover go for? No catalogs here at work __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

04-30-2003, 07:11 PM	#6
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	two guage pods? What are you guys thinking? There are so many guages these trucks need added! Heck, I already have 4 gauges just sitting in the cab on the dash of my 79 with nowhere to put em But it looks like everyone wants two guage pods. Ill take a 3 if we get enough people, a two if thats all we can do. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-30-2003, 04:23 PM	#2
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	I'm definitley in but for dual gauge only!!

04-30-2003, 07:13 PM	#7
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	i dont think I have ever seen a gauge pod for the passenger side....lol just have someone build you some fiberglass speaker housings if that is what you want. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-30-2003, 08:03 PM	#8
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	I want a two pod. Three if you want but it looks like only the two will get enough people. I want it in black - what color does everyone else want? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

04-30-2003, 10:57 PM	#9
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	put me down for the three gauge pod first, if can't get enough for the three pod then i guess i'll settle for the two pod. i been wanting one of these for a long time. ohh and i think the difference may be whenever they changed the dash pad. i was gonna put the pillar trim outta my 76 in my 84, it fit but it was diferent down where it met the dash and didn't fit the dash right. was 81 the first year of the change for the dash pads? Last edited by CT-Truckster; 04-30-2003 at 11:04 PM.

04-30-2003, 11:25 PM	#10
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	id be down for a two guager. __________________ 83 Monte Carlo 92 Camaro

05-01-2003, 08:06 AM	#11
RockHQ ROCKET POWER! Join Date: Feb 2003 Location: Finland, Europe Posts: 509	Count me in! 3-pod if possible, but anything goes, colour or pod-wise __________________ What did i do last nite? I had a wonderful time, That's what they tell me What did i do last nite? 1979 C-10 shortfleet: Olds 350, Th400, 12 bolt Current project: 1969 Olds 455 W-30, needing a rebuild

05-01-2003, 03:25 PM	#12
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	I am a possible, I had already made a guage plate like mikes where the stereo goes, but its not in yet....let me think on it for a few days and I will get back with you. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

05-01-2003, 04:18 PM	#13
ponjohn Registered User Join Date: May 2002 Location: woodbridge, ct. usa Posts: 145	i am in count me in for a two guage. Black is fine with me. Currently have a maroon interior but switching to grey at some point...........john

05-01-2003, 04:55 PM	#15
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	.... Attached Images

05-01-2003, 06:49 PM	#16
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	I'm in for a two or a three which ever I can get first. Black in color. How are we going to pay. Send all our money to Big AlVB or pay LO-Tec. directly



Register or Log In To remove these advertisements.

05-01-2003, 11:17 PM	#17
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	good point... suggestions? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

05-02-2003, 09:05 AM	#18
BigAlVB Registered User Join Date: Mar 2003 Location: Holland, MI Posts: 74	Well, first we need the thirty preorders--we're slowly on our way there. It looks like the two gauge pod is the choice of most, so that's most likely what we'll get, if we can meet the minimum amt. req'd to preorder. I'll have to send my A-pillar in first so we know exactly what the cost will be. I figured I'd send all the money in together, through me as the "project leader", as they only want one point of contact to simplify matters on their end. Now, I'm fairly new here so I can understand if there's some hesitation on the part of anyone to send me the money. That's understandable--and smart. But if everyone sends a USPS money order or something like that, it can be tracked and the US Postal Service takes that fraud very seriously. The Postal Inspectors would track me down very quickly. Now, I can also e-mail Lo-tek again and see if its possible for ya'll to either PayPal your moey to them, use credit cards, etc. Let me know what you're thinking. Keep up the good work. We need more preorders spoken for--AT LEAST thirty. REMEMBER: The price will most likely go up once this becomes a normal item. We can have 30+ preorders with no problem. __________________ "When this car hits 88 miles per hour, you're going to see some serious s*&$!" Back To The Future

05-02-2003, 07:08 PM	#19
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	cool, i'm serious about ordering one myself. if it takes me placing a preorder with them directly or through you whatever i'll do it. just keep us informed

05-02-2003, 08:11 PM	#20
mike63078 Registered User Join Date: Mar 2003 Location: Horsham PA Posts: 153	How do i pre order?

05-02-2003, 08:50 PM	#21
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	To pre-order, just say what style and color on this thread, and your good to go if we get 30 orders. For the members on other boards too - post this on other boards so we can get enough people - just this forum might not be enough, so SPREAD THE WORD! __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

05-02-2003, 08:52 PM	#22
mike63078 Registered User Join Date: Mar 2003 Location: Horsham PA Posts: 153	a 2 gauge is what i would like in blue though i can dye it my self and if i had to get a 3 i would

05-10-2003, 11:31 AM	#23
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	anyone else? I really want one

05-10-2003, 04:44 PM	#24
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Whats the count up to so far? __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-10-2003, 11:20 PM	#25
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I'm in for a two pod. Common color okay. It will be repainted anyway. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

Register or Log In To remove these advertisements.