Show your motor...

[jbristo67]

Originally Posted by N2TRUX

New Ramjet 350

Thats funny I knew this was your ttruck just by looking at the motor

[82chevy350]

350 std bore block
920 chevy heads slighty ported
edelbrock performer intake
edelbrock 1406 carb
double roller timing set
Flowtech Headers
Proform dress up kit
468 cam unknown specs

[Darron G.]

Originally Posted by silverstreak

Here's my little 250 with 3 deuces

Now thats cool!

[BAGNDRAGIT]

Ill Play, 327 double hump SS out of a 67 Impala, longtubes, HEI, Holley intake and carb, thats about it. with a good tune she will put down some serious power. it looks better now, will pot some more recent pics hen i get em

[po_bird]

I NEED TO CLEAN UP MY WIRING. IT COULD YOU A WASH UP TOO

[69 longhorn]

Which motor do you want to see? After 25 yrs playin, you can copy paste the link in my signature, & see ALL the mills that I played with in my old Longhorn I will tell you old boys "square"....that hopped OLDS was the baddest mill cross ol longhorns rails...... it took 2 lanes of pavement to just hang onto that old truck to 100 mph that old Caddy was a gas too, but that Olds had the CHIT! She had the biggest stainless valves that you could run in a stock set of Olds head(2.072/1.71). after my fav local shop "hogged" the bowls, I blended everything, as well as cutting the egr bumps out of the ex ports & liftin the roof of the ports, Intake side was a port match/blend on the bowls. The lill biochy ran a fairly mild Mondello(Engle cam).....800Holley dp on top of a Torker intake. On that ol 400 turbo, I could kick her down @ 65 mph & SMOKE rubber.....@105 I could shift her out, &FLAT SMOKE rubber crazyAL

[chevelle]

.030 over 350, throttle body injected, daily driver, with a 700-r4 tranny

[Alex Hayley]

Fastom, 1971 GMC SHORTY, JWall, mike nutt, et al, What are you guys using for your flexible rad hoses? Any particular brand you can recommend?

[Alex Hayley]

Btw, here is my 406. Run and dynoed at 539 ft/lbs and 495 hp.

[marcsRX]

Just getting started.

[TheBodyShop]

67 4x4 GMC with a 1995 454 still under construction

[mas09ts]

Here's mine:

[Tx Firefighter]

454 I built for my stepside. I disguised the hot rod parts and painted orange for the original look.



327 I built last winter. I worked hard at restoring the Edelbrock C3bx intake and original LT1 Vette valve covers.

[70shortwide]

here is my 555.

[avysittinon22s]

'93 350 700R4
Holley truck advenger carb, Edwards cam, Hedman headers

More billet on the way!

[sharpie1972]

No V6's yet? 67 GMC 351 TH400 PS. Sharpie

[po_bird]

Bring on some more pics

[Ackattack]

stock for now 5.3L (05 75k miles) with corvette accessories

[70cst]

WOW...A whole new world. Don't you dare close your eyes because if you do you will find out that when you open them your will come to the conclusion that your engine is not nearly as nice as many of these. Great pics all.

[miracle whip]

turbo lt4 383 stroker all forged and cnc ported

[rsavage]

Here is the '64 Vette 365hp 327 in my 66:
""

And here is the stock 307 in my '70 Short Fleet K10:
""

[jlaird]

Heres my 350

[TomJohnston]

What do all you guys use to clean up messy wiring? Is the garden variety flex-loom like they sell at Home Depot OK? I'm concerned about melting it.

[miracle whip]

Id try to go to raido shack or a parts store or you can also order it from summit to get the wire loom, just keep it away from your exhasts and it shouldnt melt

[Tom Vogel]

My BB w/Procharger intercooled F1R