60-66 4x4 engine mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BTCHN 1963 · 02-12-2010, 09:55 AM

Does anyone have pictures of what the motor mounts look like on 60-66 3/4 ton 4x4, in paticular a 63. The 63 i just got has only one and it looks like a home made job. Any suggestions on replacements? I was thinking of using a cross member out of a 73-87 4x4 and modifiing it as needed.

jonzcustomshop · 02-12-2010, 10:36 AM

I will try to get out and get some better pics, but I do have a 63 3/4 ton v8 4x4

BTCHN 1963 · 02-12-2010, 11:13 AM

Thanks i will lookforward to seeing them!

padresag · 02-12-2010, 11:18 AM

http://www.persh.org/pickup/perches.htm
down towards the bottom of the page. the one there has the extra brkt attached for a 6 cyl
they are hard to find for a 230,250 or 283 eng as I looked for years. idid install one from a 67 which is a complete crossmember. I would advise putting that in if you are going to remove the crossmember at the bellhousing area for an a/tran
456chevy may have the stk perches for you. the ones for a 292 are different from the others
ron

cliffy · 02-12-2010, 02:05 PM

my 60 had a 283 with a horseshoe mount at the front of the block and a crossmember with left and right mounts at the transmission, but nothing at the left and right of the motor. I just swapped the drivetrain from a 80 and now have a crossmember with left and right monts at the motor and a crossmember at the transfer cas with one mount in the middle.

padresag · 02-12-2010, 05:11 PM

By rondavid, shot with E8800 at 2009-03-04
this is the 67 frt mount and crossmember installed in my 64
ron

*LILRED66* · 02-12-2010, 11:36 PM

Here is a pair removed, sand-blasted and powder-coated.

Gus63 · 02-13-2010, 12:44 AM

Quote:

Originally Posted by LILRED66

Here is a pair removed, sand-blasted and powder-coated.

These are just what the ones on my 63 k10 look like. Don't know if they're the same for 3/4 tons, but mine was an original v8.

*LILRED66* · 02-13-2010, 11:39 AM

They are the same for K10 & K20 trucks of the same year.

02-12-2010, 09:55 AM	#1
BTCHN 1963 Registered User Join Date: Apr 2009 Location: mount angel, oregon Posts: 42	60-66 4x4 engine mounts Does anyone have pictures of what the motor mounts look like on 60-66 3/4 ton 4x4, in paticular a 63. The 63 i just got has only one and it looks like a home made job. Any suggestions on replacements? I was thinking of using a cross member out of a 73-87 4x4 and modifiing it as needed.

02-12-2010, 10:36 AM	#2
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 60-66 4x4 engine mounts I will try to get out and get some better pics, but I do have a 63 3/4 ton v8 4x4 Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

02-12-2010, 11:13 AM	#3
BTCHN 1963 Registered User Join Date: Apr 2009 Location: mount angel, oregon Posts: 42	Re: 60-66 4x4 engine mounts Thanks i will lookforward to seeing them!

02-12-2010, 11:18 AM	#4
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 60-66 4x4 engine mounts http://www.persh.org/pickup/perches.htm down towards the bottom of the page. the one there has the extra brkt attached for a 6 cyl they are hard to find for a 230,250 or 283 eng as I looked for years. idid install one from a 67 which is a complete crossmember. I would advise putting that in if you are going to remove the crossmember at the bellhousing area for an a/tran 456chevy may have the stk perches for you. the ones for a 292 are different from the others ron

02-12-2010, 02:05 PM	#5
cliffy Registered User Join Date: Oct 2006 Location: Canada Posts: 60	Re: 60-66 4x4 engine mounts my 60 had a 283 with a horseshoe mount at the front of the block and a crossmember with left and right mounts at the transmission, but nothing at the left and right of the motor. I just swapped the drivetrain from a 80 and now have a crossmember with left and right monts at the motor and a crossmember at the transfer cas with one mount in the middle. __________________ my o/l says the truck has a vibration at 65 mph..I said its ok, it goes away at 90. Last edited by cliffy; 02-12-2010 at 02:07 PM.

02-12-2010, 05:11 PM	#6
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 60-66 4x4 engine mounts By rondavid, shot with E8800 at 2009-03-04 this is the 67 frt mount and crossmember installed in my 64 ron

02-12-2010, 11:36 PM	#7
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 60-66 4x4 engine mounts Here is a pair removed, sand-blasted and powder-coated. Attached Images

02-13-2010, 11:39 AM	#9
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 60-66 4x4 engine mounts They are the same for K10 & K20 trucks of the same year.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.