TX Parting 1991 Suburban, plus other misc. items, DFW* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

givengold · 02-17-2010, 12:58 AM

If it becomes available, I just need the wiring into the firewall. I have the pigtails attached to the lights already.
Thank you

Blake_H · 02-17-2010, 01:18 AM

Thanks for the photos. I figured the panels were power, but it was worth a shot. Thanks again!

79gmcc15 · 02-17-2010, 03:30 AM

what kind of style is the wheel?

Jonboy · 02-17-2010, 05:23 AM

Quote:

Originally Posted by givengold

If it becomes available, I just need the wiring into the firewall. I have the pigtails attached to the lights already.
Thank you

Oh, I see. Are you running the 89-91 fusebox When I convert them, I splice the wires into the existing truck wiring. The colors are the same, but the firewall plug is usually different. I will get a pic of the connector in the morning to see if it will work. If so, $10 + the ride.

Quote:

Originally Posted by Blake_H

Thanks for the photos. I figured the panels were power, but it was worth a shot. Thanks again!

No problem sir. Thanks for the interest!

Quote:

Originally Posted by 79gmcc15

what kind of style is the wheel?

The steering wheel is the type with the "X" in the middle.

68Timber · 02-17-2010, 11:38 AM

Let me know if you'd consider shipping those bucket seats.

TLoz · 02-17-2010, 12:51 PM

Did this truck have a tailgate or barn doors? If it had a tailgate, what's the condition of the tailgate window switch below the dash pad? Thanks

Jonboy · 02-17-2010, 01:13 PM

Sorry man, it was doors. They are wasted.

Bruiser, I have had a ton of "be backs" locally. That would be ideal, so if that falls through in the next few weeks, I would be willing to do that.

68Timber · 02-17-2010, 01:47 PM

Sounds good - let me know. Thanks.

Rollinsqrbdy · 02-17-2010, 08:15 PM

Id like the front radiator support with grill and lights and well all of it. Thats if the others dont want it. How much shipped to Dexter, N.M. 88230?

Jonboy · 02-17-2010, 08:18 PM

Quote:

Originally Posted by Rollinsqrbdy

Id like the front radiator support with grill and lights and well all of it. Thats if the others dont want it. How much shipped to Dexter, N.M. 88230?

I will have to find out how much it will be to ship. I am afraid it may have to go by truck. What larger city (if any) is Dexter close to?

Rollinsqrbdy · 02-17-2010, 11:58 PM

Roswell, N.M. And Yes before anyone asks, It is where the aliens are? lol

79gmcc15 · 02-18-2010, 04:11 AM

Quote:

Originally Posted by Jonboy

Oh, I see. Are you running the 89-91 fusebox When I convert them, I splice the wires into the existing truck wiring. The colors are the same, but the firewall plug is usually different. I will get a pic of the connector in the morning to see if it will work. If so, $10 + the ride.

No problem sir. Thanks for the interest!

The steering wheel is the type with the "X" in the middle.

Cool, thanks! is there a chance I can get a picture of it, please?

Jonboy · 02-18-2010, 09:55 AM

The wheel is actually very nice. It had a cover on it that was funky. Tjis is the nicer wheel, with the fake stitching and all. The grain on it looks pretty good, too.

79gmcc15 · 02-18-2010, 04:45 PM

Can I get a shipping quote to 98208? Also how big is the wheel? 15 inches?

Jonboy · 02-18-2010, 05:27 PM

Quote:

Originally Posted by 79gmcc15

Can I get a shipping quote to 98208? Also how big is the wheel? 15 inches?

It is a 15" wheel. I will pull it before I go home to try to get a shipping quote.

Sorry that didn't work out like I planned. I have actually been forced to work with all of the snow we had here. I will try to get it done as soon as possible, though.

68Timber · 02-20-2010, 10:23 AM

I think I'm going to be able to do local pick up on the seats. If you haven't sold them, please post pics and put me in line for them.

87Bob · 02-20-2010, 10:01 PM

How about the overhead console and the steering wheel with cap and horn button? Can I get some photos of the console? Thanks

Jonboy · 02-20-2010, 10:10 PM

Quote:

Originally Posted by 87Bob

How about the overhead console and the steering wheel with cap and horn button? Can I get some photos of the console? Thanks

I will put you in line for the wheel and get a pic of the overhead console on Monday. Do you need the mount bracket also, or just the console?

rongstad · 02-21-2010, 12:22 AM

Do you have pics of the power mirrors? Is the hardware included? TIA rongstad

Rollinsqrbdy · 02-21-2010, 02:11 AM

Any progress on shipping infor to Dexter or Roswell on the front radiator core setup?

87Bob · 02-21-2010, 09:51 AM

Quote:

Originally Posted by Jonboy

I will put you in line for the wheel and get a pic of the overhead console on Monday. Do you need the mount bracket also, or just the console?

I'll need the bracket and the mount.

Jonboy · 02-21-2010, 11:47 AM

Quote:

Originally Posted by rongstad

Do you have pics of the power mirrors? Is the hardware included? TIA rongstad

I have the mirrors and brackets off of the truck. The wiring harness was cut off, and the switch was broken. I can post pics of the mirrors, though. If you want them, I will be in Austin the weekend of the 6th, if you would like to ride up and get them.

Quote:

Originally Posted by Rollinsqrbdy

Any progress on shipping infor to Dexter or Roswell on the front radiator core setup?

I haven't forgot, just extremely busy. I will try to figure it out Monday.

Quote:

Originally Posted by 87Bob

I'll need the bracket and the mount.

I have teh console out, but the bracket is still in the truck. Not a problem, though.

rongstad · 02-21-2010, 12:04 PM

[QUOTE=Jonboy;3814889]I have the mirrors and brackets off of the truck. The wiring harness was cut off, and the switch was broken. I can post pics of the mirrors, though. If you want them, I will be in Austin the weekend of the 6th, if you would like to ride up and get them. [QUOTE]

Post pics; I have family in lewisville.. thanks rongstad

Rollinsqrbdy · 02-21-2010, 10:22 PM

Thanks Jonboy.

dammitmitchell · 02-22-2010, 10:02 PM

still have the 700 r4? im in abilene so we can meet up and do a swap =-)

02-17-2010, 12:58 AM	#26
givengold Registered User Join Date: Jul 2008 Location: Concord, CA Posts: 194	Re: Parting 1991 Suburban, plus other misc. items, DFW If it becomes available, I just need the wiring into the firewall. I have the pigtails attached to the lights already. Thank you

02-17-2010, 01:18 AM	#27
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting 1991 Suburban, plus other misc. items, DFW Thanks for the photos. I figured the panels were power, but it was worth a shot. Thanks again!

02-17-2010, 03:30 AM	#28
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: Parting 1991 Suburban, plus other misc. items, DFW what kind of style is the wheel? __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

02-17-2010, 11:38 AM	#30
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting 1991 Suburban, plus other misc. items, DFW Let me know if you'd consider shipping those bucket seats. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-17-2010, 12:51 PM	#31
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Parting 1991 Suburban, plus other misc. items, DFW Did this truck have a tailgate or barn doors? If it had a tailgate, what's the condition of the tailgate window switch below the dash pad? Thanks

02-17-2010, 01:13 PM	#32
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW Sorry man, it was doors. They are wasted. Bruiser, I have had a ton of "be backs" locally. That would be ideal, so if that falls through in the next few weeks, I would be willing to do that. __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-17-2010, 01:47 PM	#33
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting 1991 Suburban, plus other misc. items, DFW Sounds good - let me know. Thanks. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-17-2010, 08:15 PM	#34
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Parting 1991 Suburban, plus other misc. items, DFW Id like the front radiator support with grill and lights and well all of it. Thats if the others dont want it. How much shipped to Dexter, N.M. 88230? __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

02-17-2010, 11:58 PM	#36
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Parting 1991 Suburban, plus other misc. items, DFW Roswell, N.M. And Yes before anyone asks, It is where the aliens are? lol __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

02-18-2010, 09:55 AM	#38
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW The wheel is actually very nice. It had a cover on it that was funky. Tjis is the nicer wheel, with the fake stitching and all. The grain on it looks pretty good, too. Attached Images __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-18-2010, 04:45 PM	#39
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: Parting 1991 Suburban, plus other misc. items, DFW* Can I get a shipping quote to 98208? Also how big is the wheel? 15 inches? __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

02-20-2010, 10:23 AM	#41
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting 1991 Suburban, plus other misc. items, DFW* I think I'm going to be able to do local pick up on the seats. If you haven't sold them, please post pics and put me in line for them. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-20-2010, 10:01 PM	#42
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: Parting 1991 Suburban, plus other misc. items, DFW* How about the overhead console and the steering wheel with cap and horn button? Can I get some photos of the console? Thanks __________________ My Truck's not leaking its marking its territory! Last edited by 87Bob; 02-20-2010 at 10:02 PM.

02-21-2010, 12:22 AM	#44
rongstad Future: 86 on GenIV power! Join Date: Jun 2009 Location: San Antonio, Texas Posts: 105	Re: Parting 1991 Suburban, plus other misc. items, DFW* Do you have pics of the power mirrors? Is the hardware included? TIA rongstad

02-21-2010, 02:11 AM	#45
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Parting 1991 Suburban, plus other misc. items, DFW* Any progress on shipping infor to Dexter or Roswell on the front radiator core setup? __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---



Register or Log In To remove these advertisements.

02-21-2010, 12:04 PM	#48
rongstad Future: 86 on GenIV power! Join Date: Jun 2009 Location: San Antonio, Texas Posts: 105	Re: Parting 1991 Suburban, plus other misc. items, DFW* [QUOTE=Jonboy;3814889]I have the mirrors and brackets off of the truck. The wiring harness was cut off, and the switch was broken. I can post pics of the mirrors, though. If you want them, I will be in Austin the weekend of the 6th, if you would like to ride up and get them. [QUOTE] Post pics; I have family in lewisville.. thanks rongstad

02-21-2010, 10:22 PM	#49
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: Parting 1991 Suburban, plus other misc. items, DFW* Thanks Jonboy. __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

02-22-2010, 10:02 PM	#50
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Parting 1991 Suburban, plus other misc. items, DFW* still have the 700 r4? im in abilene so we can meet up and do a swap =-) __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

Register or Log In To remove these advertisements.