|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-03-2010, 07:38 PM
|
#1 |
|
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
lowering the front of a 62.
so i have the torsion bars twisted all the way down and it still isnt low enough. what else can i do to get it lower?
|
|
|
|
03-03-2010, 08:28 PM
|
#2 |
|
Registered User
 Join Date: Jan 2008
Location: Spokane WA
Posts: 254
|
Re: lowering the front of a 62.
Drop spindles.. Some say you can put a longer bolt in the torsion bars but that bolt will end up scraping the ground. I have also read pulling out the torsion bar and re inserting it a half turn will get you a little lower but I have not tried that nor can confirm it. Drop spindles of 2.5 and with torsion adjustment its fine for me. If you want to slam it then you should swop out the front crossmember to a later chevy truck.
Reid |
|
|
|
|
03-03-2010, 09:31 PM
|
#3 |
|
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: lowering the front of a 62.
thanks for the help. i might swap the front stuff to a later model 60s setup with the springs up front. what all would i need to do this swap?
|
|
|
|
|
03-03-2010, 11:41 PM
|
#4 |
|
Registered User
Join Date: Mar 2010
Location: brandon, ms
Posts: 385
|
Re: lowering the front of a 62.
|
|
|
|
|
03-04-2010, 08:07 PM
|
#5 |
|
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: lowering the front of a 62.
seems like it would be alot of work
|
|
|
|
|
03-04-2010, 09:44 PM
|
#6 |
|
Registered User
Join Date: Nov 2008
Location: Elk Grove Ca
Posts: 629
|
Re: lowering the front of a 62.
No matter what theres gonna be some work involved. I put the 2&1/2 dropped spindles 6 lug discs. In hind sight wish I would have swapped front crossmembers mainly due to exaust clearance issue and those dumb bolts that hang from the torsion bars.
|
|
|
|
|
03-05-2010, 12:48 AM
|
#7 |
|
Registered User
Join Date: Feb 2007
Location: NE Ohio
Posts: 737
|
Re: lowering the front of a 62.
Yeah, the bolts are the worst part.
Look at this pic of my old 60. You can clearly see the bolts hanging really close to the ground under the cab. Thats with torsions turned as far as can go, bumpstops totally removed, and Toxic Shocks. It rode really pretty decent, but I drug those bolts constantly....and sometimes if they caught just right on a pothole or speedbump, it was semi-violent...  
__________________
Tim Road Hounds |
|
|
|
|
03-05-2010, 06:51 AM
|
#8 | |
|
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: lowering the front of a 62.
Quote:
That's what I did! And I dropped it more!     
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN  "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 03-05-2010 at 06:56 AM. Reason: http://public.bay.livefilestore.com/y1p6PO8bDrId5gmsSwjRMZAyLZkajCfdcK91JsrAvqzsko0aQkLUi8IiJ3P83yfnvLVerSM7UajYAuCbPVFzcUERQ |
|
|
|
|
|
03-05-2010, 08:37 AM
|
#9 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: lowering the front of a 62.
I swapped mine out with a 74 chevy cross member, with 2.5 drop spindles and air bags, it gets low enough
|
|
|
|
|
03-05-2010, 10:17 AM
|
#10 |
|
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: lowering the front of a 62.
could i swap it out to a 63 cross member and get everything from it?
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
