Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-04-2010, 10:36 AM | #1 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
windows hard to roll up
Hey guys, I have no ideas here, The windows in my truck were power( YUK!) that didnt work or work very well when they did. I changed it back to roll ups with new weather stripping, glass and all that. rolling the windows up is like wrestling an alligator, very hard to roll, which in turn has stripped the window handles. any ideas?
The window is free to move up and down ( checked before regulator was in). One regulator is a newer one and the pass side is stock.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
03-04-2010, 10:38 AM | #2 |
Senior Member
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: windows hard to roll up
I squirt a little silicone spray on the seals, makes it easier to roll them up when the seals are new
|
03-04-2010, 11:04 AM | #3 |
Registered User
Join Date: Nov 2008
Location: Crosby, Texas
Posts: 377
|
Re: windows hard to roll up
I had the same problem and I took off the inside door panel and applied some grease to the half moon gears that make the window go up and down. After a few turns it was much easier to roll up and down
__________________
" I never think of the future. It comes soon enough " - Albert Einstein |
03-04-2010, 12:48 PM | #4 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: windows hard to roll up
I put a whole gob( not really but enough) of lube on those gears before I put it together, man what a pain
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
03-04-2010, 03:00 PM | #5 |
Registered User
Join Date: Oct 2006
Location: Canada
Posts: 60
|
Re: windows hard to roll up
sorry to hear that...no really....
ahem...can I have your old electric parts? (snicker)
__________________
my o/l says the truck has a vibration at 65 mph..I said its ok, it goes away at 90. |
03-04-2010, 03:59 PM | #6 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: windows hard to roll up
I have no idea WHY someone would want them.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
03-04-2010, 04:19 PM | #7 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: windows hard to roll up
Are they working yet??? Must be bound up somewhere.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
03-04-2010, 04:22 PM | #8 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: windows hard to roll up
Well the thing is, they seam bound up but I havent found the "right" place yet. I know the pass side was always hard to roll, just cuz it wasnt used much. The ds is just rediculously hard. I can get it up/down, but it drives me nuts that it is so hard. I thought it was the regulator so I bought a new one a while back, same issue though. I also know the weatherstripping will make it stiff/harder to roll, ughhhhhh
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
03-04-2010, 04:27 PM | #9 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: windows hard to roll up
Well, if you know the glass will move in the channels, then it has to be the mechanism. I freed up my 45 yr old ones with some spray silicon lube and they work fine.
Are the rollers free in there??
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
03-04-2010, 04:53 PM | #10 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: windows hard to roll up
Yes they are, I put some white grease in the channels before I put them in the door. I guess I will take them back apart again ( 4th time) and see what is messing with it, would it matter that I put in rebuilt wing window assemblies?
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
03-05-2010, 01:39 AM | #11 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: windows hard to roll up
That could be a problem if they weren't done correctly or not the right replacement parts. They could be pinching the windows from front to back
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
03-05-2010, 02:15 AM | #12 |
Registered User
Join Date: Jun 2005
Location: winnipeg
Posts: 17
|
Re: windows hard to roll up
Hey not sure if you have got the problem solved but i had the same problem when i replaced my glass runner weather strips on mine turns out when i ordered them they sent me the wrong ones i didnt even have options in the catalog but there are two, one for windows with the metal frames one without if you use the ones made for no frames the window will roll up but super hard. good luck
|
03-05-2010, 04:12 AM | #13 |
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: windows hard to roll up
I predict something is binding or not installed correctly, because, even with new run channels, wiskers and vent assembly runner, the glass should glide smoothly and without much effort. I have installed new innards, without any lubrication and had smooth operators, so I don't think any amount of lub is going to solve the issues. If you are stripping out window rollers, something is incorrectly installed and causing the problem. If I was closer, I would lend you a hand, but you are about 8-9 hours south of my shop.
In any case, good luck with the problem and let us know what you find out. |
03-05-2010, 05:00 AM | #14 |
Registered User
Join Date: Aug 2003
Location: tool box
Posts: 3,115
|
Re: windows hard to roll up
What about those nylon/plastic rollers inside there... are they in good shape?
-W |
03-05-2010, 05:28 PM | #15 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: windows hard to roll up
All the parts are in good shape, rollers and such. I havent had time to take it apart again, ya know gotta pay bills, besides the boss doesnt like me to work on my truck while he is thinking I am at work. Weird huh?
I will check the mechanics of the regulator and let everyone know, thanks for the help.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
Bookmarks |
|
|