20x10s on the front - The 1947 - Present Chevrolet & GMC Truck Message Board Network

justpball · 04-06-2010, 06:08 PM

I love the deep lip on all four corners so here is what I am doing, 20x10s front and rear, narrowed the bottom a-arm so it would pull the front wheel in 1 inch so I can tuck these and still turn when aired out. What do you guys think?

SBTork · 04-06-2010, 08:40 PM

looks very nice. Do you have an updated pic of the whole 'burb?

justpball · 04-06-2010, 09:21 PM

Not yet, they are back ordered till the 15th so I just pulled one of my rear wheels off to make sure it was going to work

Conundrum · 04-06-2010, 10:06 PM

Looks good!
I was wondering about a 20x10 on the front myself.
How much did you shorten the lower A-arm? Did you do anything with the uppers?

OARNGESI · 04-07-2010, 06:02 AM

Would it have been easier to use a set of modular drop spindles?

justpball · 04-07-2010, 09:46 AM

I already had drop spindles so I was not about to buy another pair,
Conundrum I didnt do anything with the upper because i had it shimmed out as far as I could on the top for the negative chamber so I thought i would shorten the bottom and it would pull the top in so I didnt have all the shims. I have not tested this theory out yet so dont go cutting your arms yet...LOL I will keep you guys posted as soon as I put the arms on. I put the wheel on with the stock a-arm so i could figure out how much I needed. I also had the 18x8 with 4 in back spacing on there and could turn, so 4in of lip. So I thought a 20x10 with the 5 backspace would be 5in lip, so if i move it in 1 in, it should be the same...in my head it works anyway...LOL

87 dually burb · 04-07-2010, 09:21 PM

do you have any pic's under hood with 18"s and 20"s on front aired out
do you still have the ac box and what else will be in the way

justpball · 04-08-2010, 04:34 PM

I will get you some this weekend^

tvblazer78 · 04-09-2010, 01:04 PM

Very cool!

SBTork · 04-09-2010, 01:24 PM

Quote:

Originally Posted by justpball

I will get you some this weekend^

Good, I'd like to see that too.

Conundrum · 04-10-2010, 01:48 PM

Quote:

Originally Posted by justpball

I already had drop spindles so I was not about to buy another pair,
Conundrum I didnt do anything with the upper because i had it shimmed out as far as I could on the top for the negative chamber so I thought i would shorten the bottom and it would pull the top in so I didnt have all the shims. I have not tested this theory out yet so dont go cutting your arms yet...LOL I will keep you guys posted as soon as I put the arms on. I put the wheel on with the stock a-arm so i could figure out how much I needed. I also had the 18x8 with 4 in back spacing on there and could turn, so 4in of lip. So I thought a 20x10 with the 5 backspace would be 5in lip, so if i move it in 1 in, it should be the same...in my head it works anyway...LOL

I wasn't planning on cutting mine up just yet, lol. I still have to get it to my house and get started on my Z before I can start anything like that. I also need to figure out just what wheels i'm going to run first. But I understand your math and I can't see a reason why it wouldn't work out, there are a lot of shims on the uppers of these trucks. You would think that as long as they were built GM would have done something a little different so there wasn't a need for that many shims.

I can't wait to see how the turns out!

justpball · 04-12-2010, 09:26 AM

Sorry guys, didnt get chit done this weekend...LOL

knightowl73 · 04-19-2010, 11:27 PM

damn i hope this works out for you well. i might be trying to tuck some 20x10 BZO's that i can get a real good deal on soon. was kinda waiting to see if you were gonna have any issues before i attempted

West Texas Z · 04-19-2010, 11:30 PM

wow, that lip looks awesome!!

Conundrum · 04-20-2010, 12:08 AM

You've had a whole extra week, any udates?

justpball · 04-20-2010, 08:59 AM

still waiting on the coys...

called them yesterday and they said the container hasnt made it to cali yet so it will prob be another week before I get the wheels...sucks...aarrrrrgggg!
on a side note I got my spikes in last night and put them on my wheels! very cool looking!

knightowl73 · 04-20-2010, 02:27 PM

very nice, more info on the spikes. they push on over the lugnuts or what? where you get them? all that good stuff

87 dually burb · 04-20-2010, 09:09 PM

still needing under hood pic's to see where they fit
x2 info on the spikes

*87 chevy silverado* · 04-20-2010, 09:24 PM

x3 on the spike i like that

blu-by-u-2 · 04-20-2010, 09:40 PM

x4 on those spikes!!

knightowl73 · 04-20-2010, 10:22 PM

i feel a spiked out truck club surfacing soon lol

West Texas Z · 04-20-2010, 11:51 PM

the spikes look sweet!

justpball · 04-21-2010, 09:48 AM

yea the spikes slide over your lugs, very tight fit and they look great in person too! here is the gaybay link...
http://cgi.ebay.com/ebaymotors/Hot-C...ht_2867wt_1459

87 dually burb · 04-21-2010, 11:44 AM

check your link its the register page

justpball · 04-21-2010, 11:49 AM

try it now

04-06-2010, 06:08 PM	#1
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	20x10s on the front I love the deep lip on all four corners so here is what I am doing, 20x10s front and rear, narrowed the bottom a-arm so it would pull the front wheel in 1 inch so I can tuck these and still turn when aired out. What do you guys think? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-06-2010, 08:40 PM	#2
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: 20x10s on the front looks very nice. Do you have an updated pic of the whole 'burb? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

04-06-2010, 09:21 PM	#3
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front Not yet, they are back ordered till the 15th so I just pulled one of my rear wheels off to make sure it was going to work __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-06-2010, 10:06 PM	#4
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: 20x10s on the front Looks good! I was wondering about a 20x10 on the front myself. How much did you shorten the lower A-arm? Did you do anything with the uppers? __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

04-07-2010, 06:02 AM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 20x10s on the front Would it have been easier to use a set of modular drop spindles? __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

04-07-2010, 09:46 AM	#6
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front I already had drop spindles so I was not about to buy another pair, Conundrum I didnt do anything with the upper because i had it shimmed out as far as I could on the top for the negative chamber so I thought i would shorten the bottom and it would pull the top in so I didnt have all the shims. I have not tested this theory out yet so dont go cutting your arms yet...LOL I will keep you guys posted as soon as I put the arms on. I put the wheel on with the stock a-arm so i could figure out how much I needed. I also had the 18x8 with 4 in back spacing on there and could turn, so 4in of lip. So I thought a 20x10 with the 5 backspace would be 5in lip, so if i move it in 1 in, it should be the same...in my head it works anyway...LOL __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-07-2010, 09:21 PM	#7
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 20x10s on the front do you have any pic's under hood with 18"s and 20"s on front aired out do you still have the ac box and what else will be in the way __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

04-08-2010, 04:34 PM	#8
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front I will get you some this weekend^ __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-09-2010, 01:04 PM	#9
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 20x10s on the front Very cool! __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

04-12-2010, 09:26 AM	#12
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front Sorry guys, didnt get chit done this weekend...LOL __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

04-19-2010, 11:27 PM	#13
knightowl73 TUKE-NoBullChit Customs owner Join Date: Feb 2010 Location: La Marque, Tx Posts: 640	Re: 20x10s on the front damn i hope this works out for you well. i might be trying to tuck some 20x10 BZO's that i can get a real good deal on soon. was kinda waiting to see if you were gonna have any issues before i attempted __________________ OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs

04-19-2010, 11:30 PM	#14
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: 20x10s on the front wow, that lip looks awesome!! __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-20-2010, 12:08 AM	#15
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: 20x10s on the front You've had a whole extra week, any udates? __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now Last edited by Conundrum; 04-20-2010 at 12:09 AM.

04-20-2010, 08:59 AM	#16
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front still waiting on the coys... called them yesterday and they said the container hasnt made it to cali yet so it will prob be another week before I get the wheels...sucks...aarrrrrgggg! on a side note I got my spikes in last night and put them on my wheels! very cool looking! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 04-20-2010 at 09:06 AM.

04-20-2010, 02:27 PM	#17
knightowl73 TUKE-NoBullChit Customs owner Join Date: Feb 2010 Location: La Marque, Tx Posts: 640	Re: 20x10s on the front very nice, more info on the spikes. they push on over the lugnuts or what? where you get them? all that good stuff __________________ OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs



Register or Log In To remove these advertisements.

04-20-2010, 09:09 PM	#18
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 20x10s on the front still needing under hood pic's to see where they fit x2 info on the spikes __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

04-20-2010, 09:24 PM	#19
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: 20x10s on the front x3 on the spike i like that

04-20-2010, 09:40 PM	#20
blu-by-u-2 Registered User Join Date: Jan 2010 Location: los banos cal Posts: 130	Re: 20x10s on the front x4 on those spikes!! __________________ 77 k5 2wd 76 k5 jimmy 4x4 97 c1500 2wd 06 chrysler 300 on 22"s

04-20-2010, 10:22 PM	#21
knightowl73 TUKE-NoBullChit Customs owner Join Date: Feb 2010 Location: La Marque, Tx Posts: 640	Re: 20x10s on the front i feel a spiked out truck club surfacing soon lol __________________ OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs

04-20-2010, 11:51 PM	#22
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: 20x10s on the front the spikes look sweet! __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-21-2010, 09:48 AM	#23
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front yea the spikes slide over your lugs, very tight fit and they look great in person too! here is the gaybay link... http://cgi.ebay.com/ebaymotors/Hot-C...ht_2867wt_1459 __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 04-21-2010 at 11:49 AM.

04-21-2010, 11:44 AM	#24
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 20x10s on the front check your link its the register page __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

04-21-2010, 11:49 AM	#25
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 20x10s on the front try it now __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

Register or Log In To remove these advertisements.