MS Parting out 1974 K5 4x4 Blazer - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

benoit454 · 04-12-2010, 09:25 PM

I didn't see the rear end listed on the first page, is it gone or being used?

kinda curious as to if it's a 10 bolt and the ratio.

bigdnew · 04-12-2010, 09:47 PM

it's a ten bolt but the housing is cracked where pass side axle tube connects. i will check gearing tomorrow.

benoit454 · 04-12-2010, 10:31 PM

I'd only be interested in the internals anyways, like the carrier and all parts, pinions and all parts, basically everything inside except for the axle shafts.

bigdnew · 04-13-2010, 01:42 PM

chris just sent you a pm

glimmertwin01 · 04-13-2010, 05:46 PM

hows my parts list coming??

bigdnew · 04-13-2010, 05:54 PM

Quote:

Originally Posted by glimmertwin01

hows my parts list coming??

wiring harness is off and have to get some more oxygen for torch, getting closer

glimmertwin01 · 04-13-2010, 06:04 PM

cool let me know..... might have a need for the rear drive shaft if yours was a stick with a 205 t case

1974ChevyC10 · 04-24-2010, 01:33 PM

Do you still have the steering column and if so is it a tilt or non-tilt?what shape is it in?do you have the keys to it,does it need any parts replaced on it,is the neutral safety switch,ignition switch and all wiring related stuff still there,does it have a key tumber in it?how much for it if ya still got it?

also do you by chance still have the rear bumper and the mounting brackets?will it bolt up to a 78 truck with the blazer mounts?if you still have the bumper how much for it and what would shipping be to 85257?do you think you could get both items in one box with no damage?let me know please

bigdnew · 04-24-2010, 02:54 PM

Quote:

Originally Posted by 1974ChevyC10

Do you still have the steering column and if so is it a tilt or non-tilt?what shape is it in?do you have the keys to it,does it need any parts replaced on it,is the neutral safety switch,ignition switch and all wiring related stuff still there,does it have a key tumber in it?how much for it if ya still got it?

also do you by chance still have the rear bumper and the mounting brackets?will it bolt up to a 78 truck with the blazer mounts?if you still have the bumper how much for it and what would shipping be to 85257?do you think you could get both items in one box with no damage?let me know please

column is a non tilt and is solid. is does have a key and to my knowledge does not need any parts and truck was a four speed. the steering wheel is in excellent shape. if you want column and wheel i'll let it go for 125.00.

i don't know if bumper will fit your 78 but i'll sell bumper and brackets for 50.00. as far as shipping i'll have get you a quote monday.

1974ChevyC10 · 04-24-2010, 09:42 PM

Quote:

Originally Posted by bigdnew

column is a non tilt and is solid. is does have a key and to my knowledge does not need any parts and truck was a four speed. the steering wheel is in excellent shape. if you want column and wheel i'll let it go for 125.00.

i don't know if bumper will fit your 78 but i'll sell bumper and brackets for 50.00. as far as shipping i'll have get you a quote monday.

sounds good.in regards to the column i really only need the column itself i have plenty of steering wheels at home.go ahead and get me that total quote whenever you get a chance on monday.

**Thealien** · 04-24-2010, 10:12 PM

How is the door parts like the rubber at the top that seals to the top and the plastic at the back where the window comes up?

bigdnew · 04-24-2010, 10:30 PM

Quote:

Originally Posted by Thealien

How is the door parts like the rubber at the top that seals to the top and the plastic at the back where the window comes up?

i'll look n the morning

glimmertwin01 · 04-25-2010, 10:30 AM

Hey Don, you got a PM ... you didnt get hit by the tornados? Parts! parts! parts!

bigdnew · 04-25-2010, 10:34 AM

hey dan pm sent

1974ChevyC10 · 04-26-2010, 03:25 AM

Bigdnew-
i found a steering column that was to good a deal to pass up.i picked it up today.thanks for getting me the info on the column you have i do appreciate it.

73chevyman · 04-26-2010, 06:27 PM

it's in maryland did you sell the headlight trim didn't see it marked as sold

bigdnew · 04-26-2010, 07:10 PM

Quote:

Originally Posted by 73chevyman

it's in maryland did you sell the headlight trim didn't see it marked as sold

yeah there sold

73chevyman · 04-26-2010, 09:39 PM

thanks

**Thealien** · 04-27-2010, 08:28 PM

Quote:

Originally Posted by bigdnew

i'll look n the morning

Which morning? Just a reminder

bigdnew · 04-27-2010, 08:45 PM

that morning i looked but forgot to get back to ya. its all crap

Da88burban · 01-15-2011, 07:47 PM

Are you still parting it out? If so do you still have the windsheld frame and doors?

glimmertwin01 · 01-17-2011, 01:14 PM

hey man you disappeared..... you still around?

Chief Brody · 05-17-2011, 12:01 AM

Do you still have the Tow Hooks?

What condition is the "B" column in..the drivers side rear door jamb where the striker bolt attaches?????

madcow75 · 05-17-2011, 04:31 AM

I will take your 4x4 tunnel. I emailed you about it, if it is still available?

CowboyProtectionUnit · 05-17-2011, 05:57 AM

Does that Have a Rear Window that Retracts into the tailgate??? if so is it manual or powered

04-12-2010, 09:25 PM	#51
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting out 1974 K5 4x4 Blazer I didn't see the rear end listed on the first page, is it gone or being used? kinda curious as to if it's a 10 bolt and the ratio. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-12-2010, 09:47 PM	#52
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting out 1974 K5 4x4 Blazer it's a ten bolt but the housing is cracked where pass side axle tube connects. i will check gearing tomorrow. __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

04-12-2010, 10:31 PM	#53
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting out 1974 K5 4x4 Blazer I'd only be interested in the internals anyways, like the carrier and all parts, pinions and all parts, basically everything inside except for the axle shafts. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-13-2010, 01:42 PM	#54
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting out 1974 K5 4x4 Blazer chris just sent you a pm __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

04-13-2010, 05:46 PM	#55
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1974 K5 4x4 Blazer hows my parts list coming?? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

04-13-2010, 06:04 PM	#57
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1974 K5 4x4 Blazer cool let me know..... might have a need for the rear drive shaft if yours was a stick with a 205 t case __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

04-24-2010, 01:33 PM	#58
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	Re: Parting out 1974 K5 4x4 Blazer Do you still have the steering column and if so is it a tilt or non-tilt?what shape is it in?do you have the keys to it,does it need any parts replaced on it,is the neutral safety switch,ignition switch and all wiring related stuff still there,does it have a key tumber in it?how much for it if ya still got it? also do you by chance still have the rear bumper and the mounting brackets?will it bolt up to a 78 truck with the blazer mounts?if you still have the bumper how much for it and what would shipping be to 85257?do you think you could get both items in one box with no damage?let me know please __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

04-24-2010, 10:12 PM	#61
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Parting out 1974 K5 4x4 Blazer How is the door parts like the rubber at the top that seals to the top and the plastic at the back where the window comes up? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

04-25-2010, 10:30 AM	#63
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1974 K5 4x4 Blazer Hey Don, you got a PM ... you didnt get hit by the tornados? Parts! parts! parts! __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

04-25-2010, 10:34 AM	#64
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting out 1974 K5 4x4 Blazer hey dan pm sent __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

04-26-2010, 03:25 AM	#65
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	Re: Parting out 1974 K5 4x4 Blazer Bigdnew- i found a steering column that was to good a deal to pass up.i picked it up today.thanks for getting me the info on the column you have i do appreciate it. __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

04-26-2010, 06:27 PM	#66
73chevyman Registered User Join Date: Nov 2008 Location: Lusby, MD Posts: 563	Re: Parting out 1974 K5 4x4 Blazer it's in maryland did you sell the headlight trim didn't see it marked as sold __________________ http://67-72chevytrucks.com/vboard/group.php?groupid=37 73 C10 Fleetside If it ain't a Chevy it's foreign http://hotridesmag.com/

04-26-2010, 09:39 PM	#68
73chevyman Registered User Join Date: Nov 2008 Location: Lusby, MD Posts: 563	Re: Parting out 1974 K5 4x4 Blazer thanks __________________ http://67-72chevytrucks.com/vboard/group.php?groupid=37 73 C10 Fleetside If it ain't a Chevy it's foreign http://hotridesmag.com/

04-27-2010, 08:45 PM	#70
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting out 1974 K5 4x4 Blazer that morning i looked but forgot to get back to ya. its all crap __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

01-15-2011, 07:47 PM	#71
Da88burban GM's 4 Life Join Date: Sep 2010 Location: Greenwood, SC Posts: 363	Re: Parting out 1974 K5 4x4 Blazer Are you still parting it out? If so do you still have the windsheld frame and doors? __________________ Jack '54 Chevy 3100 "Just a Mess" '74 Chevy Super 10 468BB "One Fast Rust Bucket" '86 Pontiac Fiero GT '88 Chevy burb "Tha Big Turd" '93 GMC Safari "Bone Crusher" .................____________ .............../______l___\|___\____ ;,;,;,;,;,;,;\|__(O)_\| __l___l__(O) \|



Register or Log In To remove these advertisements.

01-17-2011, 01:14 PM	#72
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1974 K5 4x4 Blazer hey man you disappeared..... you still around? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

05-17-2011, 12:01 AM	#73
Chief Brody Registered User Join Date: Sep 2010 Location: Alabama Posts: 14	Re: Parting out 1974 K5 4x4 Blazer Do you still have the Tow Hooks? What condition is the "B" column in..the drivers side rear door jamb where the striker bolt attaches?????

05-17-2011, 04:31 AM	#74
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out 1974 K5 4x4 Blazer I will take your 4x4 tunnel. I emailed you about it, if it is still available?

05-17-2011, 05:57 AM	#75
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: Parting out 1974 K5 4x4 Blazer Does that Have a Rear Window that Retracts into the tailgate??? if so is it manual or powered __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

Register or Log In To remove these advertisements.