The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-22-2010, 06:00 AM   #1
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
Questions about a/c stuff on a 74 GMC

Tomorrow im going to be looking at a complete a/c system out of a 74 GMC a buddy of mine is selling.he is taking everything off the firewall,the compressor and hard lines,reciever drier,condensor and all other necessary components for a factory 70's a/c system.what im trying to find out is what is good price to offer for it since he isnt sure how much he wants and i would imagine used a/c stuff cant be worth a whole lot of money.moderators i hope im not violating the rules by asking this im not selling this stuff myself nor am i helping sell this stuff im looking to buy it for my own use and im not sure what kind of offer to make.if it becomes a big deal for this posting on here then go ahead and delete it.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 05-22-2010, 07:18 AM   #2
Restrorob
The One And Only !!!
 
Restrorob's Avatar
 
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
Re: Questions about a/c stuff on a 74 GMC

If it's a fully charged operating system I'd go 100 bux, If it's a open/empty non-working system give um a six pack.....
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz !


The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.


"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Restrorob is offline   Reply With Quote
Old 05-22-2010, 11:49 AM   #3
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
Re: Questions about a/c stuff on a 74 GMC

i believe it has been opened up i know its totally off the truck.i figure still it will be cheap a 6 pack is out of the question as he doesnt drink.i hope to have a little more input by the time i go out there today or maybe tomorrow depending on how things play out today.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 05-22-2010, 08:16 PM   #4
Restrorob
The One And Only !!!
 
Restrorob's Avatar
 
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
Re: Questions about a/c stuff on a 74 GMC

Well.....A six pack of Coke then, The problem with a used open/off the vehicle system is you don't know the condition of anything. There could be a leak in the evaporator/condenser or the compressor seal, You can't tell if a compressor is going to pump properly or rattle like crazy until it's all mounted and charged. Then there's the control switches/relays/low and high pressure switches and blower motor that's all in question.

Sooo, Even if you have the tools and equipment to vacuum and recharge the system yourself once installed (with a new dryer/oil/o-rings/orifice tube and refrigerant), It could still cost quite a bit only to find faulty parts that need replacing and the vacuum/recharge process done again......
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz !


The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.


"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Restrorob is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com