DJ JR's Build Thread - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 06-27-2010, 10:35 AM

Looks like his ride is already nicer than mine congrats on the sweet ride and a kid who is into hotrods...

ripdog28 · 06-28-2010, 02:40 PM

DJ, those motor mounts are great. As for the trans cross member, you will have problems with the exhaust if this truck is lowered. My Comp headers ran into the stock cross member. I had to get one with a 2 or 3 inch drop so i could run the exhaust straight.

DJ JR. · 06-28-2010, 09:04 PM

THANK YOU DADDY!!!

And thanks to all yall for the compliments on the truck!!!

DJ JR. · 07-11-2011, 09:56 PM

New Pics.

DJ JR. · 07-11-2011, 10:00 PM

DJ JR. · 07-11-2011, 10:03 PM

Motor is finally ready, looking forward to miking some noise soon

djracer · 07-12-2011, 11:00 PM

Jr's motor is finally here. We will try to get some motor pics and get started on the install soon. Cade has been cleaning the truck and front frame are so we can paint it. We also have to paint the engine.

aggie91 · 07-13-2011, 01:12 PM

That's cool that you got the motor. We are still a long way from that point on my son's project. Looking forward to the pic's.
Posted via Mobile Device

djracer · 07-14-2011, 07:00 AM

Here are a few pics of the motor. We have to clean some old paint of the pan and block and paint the engine. I hope to use some Fabbed Aluminum valve covers if they will work.

djracer · 07-14-2011, 07:08 AM

The motor is a 454 with stock type ls6 dome pistons and 781 oval ports. The motor has an Edelbrock performer rpm cam and intake with the matching springs. We are topping this combo with a 650 double pumper. We have a Ptc convertor and a built turbo 400 and a 9 inch with moser axles and a posi unit. This truck was ordered with leaf spring but will be swapped out for trailing arms and coilover shocks. We still have to buy wheels but I am hoping to get it to move on its own power before Cade's Birthday the end of August. I wish I had a truck like this at 14.

noonzor · 07-16-2011, 12:25 PM

i wish i had a truck like that at 25! haha

Rannos · 07-22-2011, 10:16 PM

Quote:

Originally Posted by djracer

Cade and I started cutting the plastic wood for the bed.

Where did you get the plastic wood? Is that like the BarForce plastic lumber? Thought that stuff was kind of heavy...

djracer · 07-23-2011, 12:16 AM

I did a trade with a guy and got it. Its the stuff used for decks. I'm too lazy to keep up real wood. This will have stainless strips when finished.

fastwillie 696969 · 07-23-2011, 12:30 AM

nice truck i like that clemson orange color

djracer · 07-23-2011, 11:31 AM

The pictures don't do the color any justice. Its Actually house of colors Tangelo Pearl!

fastwillie 696969 · 07-23-2011, 11:20 PM

thats my color with candy red on top

djracer · 07-24-2011, 09:28 AM

Quote:

Originally Posted by fastwillie 696969

thats my color with candy red on top

Cool!

djracer · 07-28-2011, 08:31 AM

Truck is finally in the shop. I hope we get to start on the motor and tranny install this weekend.

**Hart_Rod** · 07-28-2011, 08:46 AM

Looks like you might have it done by Cruisin the Coast?!

Marv D · 07-28-2011, 08:59 AM

Nice NICE job Kevin. So nice I won't even give you any guff about the pigblock I think it's going to be one hell of a first vehicle,, you spoil the boy!!!!! Where is there to go from here,, driver for your truck, ProMods,, ....

djracer · 07-28-2011, 10:05 AM

Quote:

Originally Posted by Hart_Rod

Looks like you might have it done by Cruisin the Coast?!

That would be sweet Rob. I gotta figure out the wheel and tire situation? I want to crank it by his birthday at the end of the month.

Marv it was just too good of a deal to pass up. I would have had twice the money in it if we had started with an unpainted truck. I hope he likes it enough to want to stick with racing!

djracer · 07-31-2011, 01:26 AM

We primed and Painted the Motor will try to clear it tomorrow. We painted it black. The only color I paint motors.

djracer · 08-03-2011, 11:45 PM

Here's a few pics.

djracer · 08-03-2011, 11:51 PM

And then Black

djracer · 08-03-2011, 11:54 PM

Afew of Cade working and getting dirty.

06-27-2010, 10:35 AM	#51
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: DJ JR's Build Thread Looks like his ride is already nicer than mine congrats on the sweet ride and a kid who is into hotrods... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-28-2010, 02:40 PM	#52
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: DJ JR's Build Thread DJ, those motor mounts are great. As for the trans cross member, you will have problems with the exhaust if this truck is lowered. My Comp headers ran into the stock cross member. I had to get one with a 2 or 3 inch drop so i could run the exhaust straight. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

06-28-2010, 09:04 PM	#53
DJ JR. Registered User Join Date: Feb 2010 Location: Wetumpka,AL Posts: 7	Re: DJ JR's Build Thread THANK YOU DADDY!!! And thanks to all yall for the compliments on the truck!!!

07-11-2011, 09:56 PM	#54
DJ JR. Registered User Join Date: Feb 2010 Location: Wetumpka,AL Posts: 7	Re: DJ JR's Build Thread New Pics. Attached Images

07-11-2011, 10:00 PM	#55
DJ JR. Registered User Join Date: Feb 2010 Location: Wetumpka,AL Posts: 7	Re: DJ JR's Build Thread Attached Images

07-11-2011, 10:03 PM	#56
DJ JR. Registered User Join Date: Feb 2010 Location: Wetumpka,AL Posts: 7	Re: DJ JR's Build Thread Motor is finally ready, looking forward to miking some noise soon Attached Images

07-12-2011, 11:00 PM	#57
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Jr's motor is finally here. We will try to get some motor pics and get started on the install soon. Cade has been cleaning the truck and front frame are so we can paint it. We also have to paint the engine. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-13-2011, 01:12 PM	#58
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: DJ JR's Build Thread That's cool that you got the motor. We are still a long way from that point on my son's project. Looking forward to the pic's. Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

07-14-2011, 07:00 AM	#59
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Here are a few pics of the motor. We have to clean some old paint of the pan and block and paint the engine. I hope to use some Fabbed Aluminum valve covers if they will work. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-14-2011, 07:08 AM	#60
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread The motor is a 454 with stock type ls6 dome pistons and 781 oval ports. The motor has an Edelbrock performer rpm cam and intake with the matching springs. We are topping this combo with a 650 double pumper. We have a Ptc convertor and a built turbo 400 and a 9 inch with moser axles and a posi unit. This truck was ordered with leaf spring but will be swapped out for trailing arms and coilover shocks. We still have to buy wheels but I am hoping to get it to move on its own power before Cade's Birthday the end of August. I wish I had a truck like this at 14. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-16-2011, 12:25 PM	#61
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread i wish i had a truck like that at 25! haha __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

07-23-2011, 12:16 AM	#63
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I did a trade with a guy and got it. Its the stuff used for decks. I'm too lazy to keep up real wood. This will have stainless strips when finished. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-23-2011, 12:30 AM	#64
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: DJ JR's Build Thread nice truck i like that clemson orange color __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

07-23-2011, 11:31 AM	#65
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread The pictures don't do the color any justice. Its Actually house of colors Tangelo Pearl! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-23-2011, 11:20 PM	#66
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: DJ JR's Build Thread thats my color with candy red on top __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex



Register or Log In To remove these advertisements.

07-28-2011, 08:31 AM	#68
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Truck is finally in the shop. I hope we get to start on the motor and tranny install this weekend. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-28-2011, 08:46 AM	#69
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: DJ JR's Build Thread Looks like you might have it done by Cruisin the Coast?! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-28-2011, 08:59 AM	#70
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: DJ JR's Build Thread Nice NICE job Kevin. So nice I won't even give you any guff about the pigblock I think it's going to be one hell of a first vehicle,, you spoil the boy!!!!! Where is there to go from here,, driver for your truck, ProMods,, .... __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

07-31-2011, 01:26 AM	#72
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread We primed and Painted the Motor will try to clear it tomorrow. We painted it black. The only color I paint motors. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-03-2011, 11:45 PM	#73
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Here's a few pics. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-03-2011, 11:51 PM	#74
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread And then Black Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-03-2011, 11:54 PM	#75
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Afew of Cade working and getting dirty. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 08-04-2011 at 12:01 AM.

Register or Log In To remove these advertisements.