What does this bellhousing fit?????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ranger374 · 07-29-2010, 05:49 PM

It is a gm bellshousing, just don't know what it fits. it was laying in the bed of my 63 c10(but that don't mean it came off it)

i think the files with the pics, front & back, should be attatched.

skoffice · 07-30-2010, 07:35 AM

I think thats to a 235? I'm probably wrong though.

onequickchevy · 07-30-2010, 02:33 PM

I agree with SK, it looks just like the one from my 57 when I heaved the old 235 three on the tree. Someone will probably want it, just not me

62gmc910 · 07-30-2010, 10:23 PM

235 or 261 chev , truck application , with out a left side veiw I can't tell if it is 60-62 or earlier, but its not from your '63 unless it is really early production and one slipedd through, '63 s had the V8 chevy pattern with the "new" 6 -230/250 and later 292, oops forgot the 194

ranger374 · 07-30-2010, 10:35 PM

Quote:

Originally Posted by 62gmc910

235 or 261 chev , truck application , with out a left side veiw I can't tell if it is 60-62 or earlier, but its not from your '63 unless it is really early production and one slipedd through, '63 s had the V8 chevy pattern with the "new" 6 -230/250 and later 292, oops forgot the 194

that's what i figured. I had a 235 in my 62, and i thought that's what it looked like, but i sold the tranny with the motor, so i had nothing to compare it to

I have one from the later model v-6 that i am going to use behind my small block v-8. guess the 235 bell would make a good boat anchor

raycow · 08-01-2010, 12:22 PM

It's from a 54-59 truck. 60-62 would have the fork on the right hand side for hydraulic linkage.

Ray

ranger374 · 08-01-2010, 09:51 PM

ok thanks. how much would one be worth???

raycow · 08-02-2010, 06:00 AM

Well this turned into quite an interesting education for me. I normally use ebay to check prices, but your part isn't being offered just now.

I was able to find these two.

http://cgi.ebay.com/ebaymotors/Chevr...item2303158601

http://cgi.ebay.com/ebaymotors/54-55...item25587adce2

They are similar to yours, but not identical. Note the extra hole on the left front face. Also the boss on the left side has a stud in it, and I can't see if yours is tapped or not. I am thinking these two are correct for 54 and 55 1st series. That would make yours 55 2nd series to 59, which is a fairly common part. You could start it out at $50, but don't be surprised if you have to lower the price in order for it to move.

Ray

07-29-2010, 05:49 PM	#1
ranger374 Registered User Join Date: Jun 2010 Location: Georgia Posts: 30	What does this bellhousing fit?????? It is a gm bellshousing, just don't know what it fits. it was laying in the bed of my 63 c10(but that don't mean it came off it) i think the files with the pics, front & back, should be attatched. Attached Images __________________ My Build thread http://www.67-72chevytrucks.com/vboa...d.php?t=408574

07-30-2010, 07:35 AM	#2
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: What does this bellhousing fit?????? I think thats to a 235? I'm probably wrong though. __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

07-30-2010, 02:33 PM	#3
onequickchevy Registered User Join Date: Sep 2009 Location: Marianna, Florida Posts: 339	Re: What does this bellhousing fit?????? I agree with SK, it looks just like the one from my 57 when I heaved the old 235 three on the tree. Someone will probably want it, just not me __________________ Slowly but surely getting it done.

07-30-2010, 10:23 PM	#4
62gmc910 Registered User Join Date: Nov 2009 Location: Cremona AB Canada Posts: 370	Re: What does this bellhousing fit?????? 235 or 261 chev , truck application , with out a left side veiw I can't tell if it is 60-62 or earlier, but its not from your '63 unless it is really early production and one slipedd through, '63 s had the V8 chevy pattern with the "new" 6 -230/250 and later 292, oops forgot the 194 __________________ 62 GMC 910 short fleetside 454 super t10 14 bolt w/gov lock 70s c20 front discs (built in the 80s) 65 GMC 930 dualwheel 292 4spd all origonal 39k mi(my sons truck) 63 GMC 950 camperized school bus, (Gus the bus) 350 4speed 2 speed rear 64 GMC 950 "spare" bus 283? 4speed detroit locker 53 GMC 1ton dual wheel bus 78 GMC c25 short course off road race truck(son's truck) 355 th400 14 bolt (www.wheel2wheel.ca) 88 Peterbilt 379 longhood (hauls race truck)

08-01-2010, 12:22 PM	#6
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: What does this bellhousing fit?????? It's from a 54-59 truck. 60-62 would have the fork on the right hand side for hydraulic linkage. Ray

08-01-2010, 09:51 PM	#7
ranger374 Registered User Join Date: Jun 2010 Location: Georgia Posts: 30	Re: What does this bellhousing fit?????? ok thanks. how much would one be worth??? __________________ My Build thread http://www.67-72chevytrucks.com/vboa...d.php?t=408574

08-02-2010, 06:00 AM	#8
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: What does this bellhousing fit?????? Well this turned into quite an interesting education for me. I normally use ebay to check prices, but your part isn't being offered just now. I was able to find these two. http://cgi.ebay.com/ebaymotors/Chevr...item2303158601 http://cgi.ebay.com/ebaymotors/54-55...item25587adce2 They are similar to yours, but not identical. Note the extra hole on the left front face. Also the boss on the left side has a stud in it, and I can't see if yours is tapped or not. I am thinking these two are correct for 54 and 55 1st series. That would make yours 55 2nd series to 59, which is a fairly common part. You could start it out at $50, but don't be surprised if you have to lower the price in order for it to move. Ray



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.