WTB:700r4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 06-06-2003, 03:20 PM

Anyone got a built 700 laying around that will work behind a built 454.i am thinking of going that route instead of a 400 for the
90 silverado im building.

phantom dually · 06-07-2003, 12:43 AM

If you are going to put a 700 behind that I wouldhighly recommened having one built yourself. I have ran 2 of them on a 383 and just pulled the 2nd out and went witha 350. I never got a good shift from either one. Go with the 400 if you want performance. I was only putting about 450 horse to it.

tommie · 06-07-2003, 02:17 AM

your going to have a very hard time getting a 700r4 to stay together behind a big block, better stick with a th400 or go to a 4l80

79BIG10 · 06-07-2003, 04:38 AM

You can get a 700r4 to hold up behind a BB. They were installed behind diesels from factory. The thing to do is call around and get a written warranty saying that they will gurantee it in your truck with that BB in it. Then find out about the shops that give you a warranty on their workmanship.

phantom dually · 06-08-2003, 12:03 PM

Good luck on finding a company to back you on that one. Any one in my area sells everything as is due to the fact that there are so many people street racing and drag racing. If a part wears they will fix it but if it breaks they wont.

*racedvl* · 06-08-2003, 12:10 PM

Motorhomes. 454 - 700r4's. I don't see a problem. . . .

*1FaastC10* · 06-09-2003, 08:35 AM

Quote:

Originally posted by racedvl
Motorhomes. 454 - 700r4's. I don't see a problem. . . .

firsst off, why would someone in their right mind stick a 700R4 behind a big block? second off, why do it in something that weighs 3 times as much as a normal vehicle? might want to check your facts there racedvl, or it could be that someone has a junkyard cobbled together POS motorhome...

06-06-2003, 03:20 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	WTB:700r4 Anyone got a built 700 laying around that will work behind a built 454.i am thinking of going that route instead of a 400 for the 90 silverado im building.

06-07-2003, 12:43 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If you are going to put a 700 behind that I wouldhighly recommened having one built yourself. I have ran 2 of them on a 383 and just pulled the 2nd out and went witha 350. I never got a good shift from either one. Go with the 400 if you want performance. I was only putting about 450 horse to it. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-07-2003, 04:38 AM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	You can get a 700r4 to hold up behind a BB. They were installed behind diesels from factory. The thing to do is call around and get a written warranty saying that they will gurantee it in your truck with that BB in it. Then find out about the shops that give you a warranty on their workmanship. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

06-08-2003, 12:03 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Good luck on finding a company to back you on that one. Any one in my area sells everything as is due to the fact that there are so many people street racing and drag racing. If a part wears they will fix it but if it breaks they wont. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-07-2003, 02:17 AM	#3
tommie 97' Tahoe 2dr/2wd Join Date: Jul 2002 Location: Huffman,TX Posts: 1,168	your going to have a very hard time getting a 700r4 to stay together behind a big block, better stick with a th400 or go to a 4l80

06-08-2003, 12:10 PM	#6
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Motorhomes. 454 - 700r4's. I don't see a problem. . . .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.