Throttle return spring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Born Lucky · 09-19-2010, 06:49 PM

Can someone post photos of their throttle return spring.
I just redo my system and my placement seems off.
I have a 1964 C20 292 engine.
Thanks in advance.

**aerotruk63** · 09-19-2010, 07:53 PM

Born Lucky · 09-19-2010, 07:58 PM

Quote:

Originally Posted by aerotruk63

I have the repair mauel Aerotruk 63 and when I installed the spring in that position it would keep my idle high.
I purchased a return spring from NAPA and it is a double type. I think the spring is too stronge as it would not let my throttle linkage return to the original location. This is why I was asking for a actual photo of the truck.
Thank you Aerotruk63.

**aerotruk63** · 09-19-2010, 08:02 PM

Is your gas pedal moving freely, might need some lube on the hinge section! My Dad said his 63 Bel Air would seize up in the pivot at the firewall.

Born Lucky · 09-19-2010, 08:37 PM

Quote:

Originally Posted by aerotruk63

Is your gas pedal moving freely, might need some lube on the hinge section! My Dad said his 63 Bel Air would seize up in the pivot at the firewall.

I will look into this as I am restoring/ repairing things.
Aerotruk63 should this application require one or two springs?

09-19-2010, 06:49 PM	#1
Born Lucky Registered User Join Date: Mar 2010 Location: St Charles MO Posts: 481	Throttle return spring Can someone post photos of their throttle return spring. I just redo my system and my placement seems off. I have a 1964 C20 292 engine. Thanks in advance.

09-19-2010, 07:53 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Throttle return spring __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

09-19-2010, 08:02 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Throttle return spring Is your gas pedal moving freely, might need some lube on the hinge section! My Dad said his 63 Bel Air would seize up in the pivot at the firewall. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 09-19-2010 at 08:04 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.