1990 2WD 1/2ton 14 Bolt Rear End - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trenchwarfare · 09-21-2010, 06:39 PM

It seems as if nearly everything is shot in it. What axle can I use to replace it? I know of a friend who has a frame and axles from a 97 GM 3500. I wouldn't mind as they come with the rims. Would I be able to easily mount the rear axle or should I look somewhere completely different?

BigBlocksRule · 09-21-2010, 07:41 PM

Take a few measurements to be sure dimensions are the same, both on the rearend and frame. My guess is that it'll work and be a fairly easy bolt-up.

09-21-2010, 06:39 PM	#1
trenchwarfare Registered User Join Date: Nov 2008 Location: WNY Posts: 313	1990 2WD 1/2ton 14 Bolt Rear End It seems as if nearly everything is shot in it. What axle can I use to replace it? I know of a friend who has a frame and axles from a 97 GM 3500. I wouldn't mind as they come with the rims. Would I be able to easily mount the rear axle or should I look somewhere completely different? __________________ ____________________________________

09-21-2010, 07:41 PM	#2
BigBlocksRule Registered User Join Date: Jun 2008 Location: Lubbock, TX Posts: 2,047	Re: 1990 2WD 1/2ton 14 Bolt Rear End Take a few measurements to be sure dimensions are the same, both on the rearend and frame. My guess is that it'll work and be a fairly easy bolt-up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.