Bed Protection - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cops053 · 10-20-2010, 07:16 PM

Wood stained with clear.whats better polyurathane or varnish? What have others used and been happy with? Thanks

**aerotruk63** · 10-20-2010, 07:47 PM

I put Thompsons Wood sealer on mine, there's no gloss but there's protection.

harold64 · 10-20-2010, 08:26 PM

hey copso53! i just did my bed clear,with poleurathen, it came out fantastic! i put 3 coats on with sanding between coats. i used 220 grit paper between coats. after that i put another 3 coats on sanding with 320 for coat 4-5. i also used a 2 inch roller on the last 3 coats. it worked wonders for me!just my 2 cents worth. good luck, have fun!

jonathan-m · 10-20-2010, 08:30 PM

I use my truck as a truck, so I didn't bother with polyurethane or anything like that. I lay down a layer of deck sealer every now and again. No gloss, keeps the wood looking good, and its easy to lay down.

63 & 64 Bowties · 10-21-2010, 08:07 PM

Marine Spar Varnish
Think about it.... it's what is used on antique wooden boats.
You'll only find it at actual paint stores, not Lowes/Home Depot type stores.
If you can coat a wooden boat, then plop it in the water for several years, that's gotta be the best bet for protecting your wood bed.
It's what I used.

10-20-2010, 07:16 PM	#1
Cops053 Registered User Join Date: Sep 2008 Location: Toccoa,Georgia Posts: 86	Bed Protection Wood stained with clear.whats better polyurathane or varnish? What have others used and been happy with? Thanks

10-20-2010, 07:47 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Bed Protection I put Thompsons Wood sealer on mine, there's no gloss but there's protection. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-20-2010, 08:26 PM	#3
harold64 Registered User Join Date: Nov 2009 Location: ortonville michigan Posts: 151	Re: Bed Protection hey copso53! i just did my bed clear,with poleurathen, it came out fantastic! i put 3 coats on with sanding between coats. i used 220 grit paper between coats. after that i put another 3 coats on sanding with 320 for coat 4-5. i also used a 2 inch roller on the last 3 coats. it worked wonders for me!just my 2 cents worth. good luck, have fun!

10-20-2010, 08:30 PM	#4
jonathan-m Registered User Join Date: Feb 2007 Location: Phoenix Az Posts: 432	Re: Bed Protection I use my truck as a truck, so I didn't bother with polyurethane or anything like that. I lay down a layer of deck sealer every now and again. No gloss, keeps the wood looking good, and its easy to lay down. __________________ Rockin' a '66 and loving every minute of it

10-21-2010, 08:07 PM	#5
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Bed Protection Marine Spar Varnish Think about it.... it's what is used on antique wooden boats. You'll only find it at actual paint stores, not Lowes/Home Depot type stores. If you can coat a wooden boat, then plop it in the water for several years, that's gotta be the best bet for protecting your wood bed. It's what I used. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.