Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-27-2010, 10:00 AM | #1 |
Registered User
Join Date: Jul 2010
Location: Denton, TX
Posts: 155
|
Manual to power brakes
I am going from manual brakes to power brakes. The new booster and master came already assembled. Do I need to separate them and bench bleed the master? Can someone give me a how to on bench bleeding?
|
10-27-2010, 11:33 AM | #2 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: Manual to power brakes
you'll need to take the master off..
and go to napa or others and get the bleading kit, unless it came wuth your set up it's 2 rubber hoses and fittings to screw into the ports of the master, the rubber hose goes from the fittings in the ports to the master so when you pump the master, the fluid goes back into the master.. if you don't have the kit to blead they are very cheap |
10-27-2010, 05:28 PM | #3 |
Registered User
Join Date: Jul 2010
Location: Denton, TX
Posts: 155
|
Re: Manual to power brakes
I got it all done but I had to make my own hoses. I went to four different auto stores and know one knew what I was talking. Oh well I got power brakes now!!!!!!!!!!!!!!!!
Thanks bud!!!!!!!! |
Bookmarks |
|
|