anybody running ls motor with a porterbuilt dropmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mofo69 · 11-03-2010, 07:12 PM

wondering what headers and oil pan yall be using and if your running electric fans. the motor is an lq4 out of 2003 hd. thanks for any advice i'm new to these ls motors.

kvn1011 · 11-03-2010, 10:10 PM

i will be, but havent rec'd my LQ4 yet, i have the dropmember also ,but one thread that will help you is rick's c10
link-->

http://67-72chevytrucks.com/vboard/s...d.php?t=354512
he has a fbody oil pan, and pick up

mofo69 · 11-04-2010, 08:26 PM

checked it out, bad ass truck. thanks for pointing that thread out

BACKYARD88 · 11-16-2010, 03:11 PM

I have the GMPP pan kit and it clears fine. I have a set of ebay stainless F-body headers, the passengers side fits great but the drivers side hits the lower control arm.

kvn1011 · 11-16-2010, 04:04 PM

Quote:

Originally Posted by BACKYARD88

I have the GMPP pan kit and it clears fine. I have a set of ebay stainless F-body headers, the passengers side fits great but the drivers side hits the lower control arm.

do you have any pics of the drivers side??

BACKYARD88 · 11-16-2010, 04:26 PM

Not at the moment but I can get you some tonight.

kvn1011 · 11-16-2010, 06:35 PM

ok that would be cool,(re:pics)
are you going to fab new headers for the drivers side??

BACKYARD88 · 11-18-2010, 09:56 AM

After much heating and beating this is what I ended up with. When it's laid out(it's up a little in these pics) the header still contacts the arm. Obvoiusly this won't work so the only option is to get another set or have someone modify one (maybe two) of the tubes. I'm leaning towards another set because I don't care for the way the collector points out towards the framerail either. I'm not doing anything until I find a set that will fit for sure with no mods.

kvn1011 · 03-26-2011, 11:25 PM

Hey backyard is that the musclecar pan kit that you have?
Posted via Mobile Device

BACKYARD88 · 03-27-2011, 09:44 PM

Yes Sir!
Posted via Mobile Device

kvn1011 · 03-28-2011, 02:07 AM

Cool! Ill be ordering it soon! Thanks!
Posted via Mobile Device

jasonhall · 03-28-2011, 11:38 PM

Is pretty easy to replace the oil pan and windage trey on the ls motor?

**Hart_Rod** · 03-29-2011, 11:39 PM

Quote:

Originally Posted by jasonhall

Is pretty easy to replace the oil pan and windage trey on the ls motor?

It's pretty straightforward if the engine out of the truck.

11-03-2010, 07:12 PM	#1
mofo69 Registered User Join Date: Jan 2005 Location: Conroe, Texas Posts: 26	anybody running ls motor with a porterbuilt dropmember wondering what headers and oil pan yall be using and if your running electric fans. the motor is an lq4 out of 2003 hd. thanks for any advice i'm new to these ls motors.

11-03-2010, 10:10 PM	#2
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: anybody running ls motor with a porterbuilt dropmember i will be, but havent rec'd my LQ4 yet, i have the dropmember also ,but one thread that will help you is rick's c10 link--> http://67-72chevytrucks.com/vboard/s...d.php?t=354512 he has a fbody oil pan, and pick up Last edited by kvn1011; 11-03-2010 at 10:11 PM.

11-04-2010, 08:26 PM	#3
mofo69 Registered User Join Date: Jan 2005 Location: Conroe, Texas Posts: 26	Re: anybody running ls motor with a porterbuilt dropmember checked it out, bad ass truck. thanks for pointing that thread out

11-16-2010, 03:11 PM	#4
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: anybody running ls motor with a porterbuilt dropmember I have the GMPP pan kit and it clears fine. I have a set of ebay stainless F-body headers, the passengers side fits great but the drivers side hits the lower control arm. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

11-16-2010, 04:26 PM	#6
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: anybody running ls motor with a porterbuilt dropmember Not at the moment but I can get you some tonight. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

11-16-2010, 06:35 PM	#7
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: anybody running ls motor with a porterbuilt dropmember ok that would be cool,(re:pics) are you going to fab new headers for the drivers side??

11-18-2010, 09:56 AM	#8
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: anybody running ls motor with a porterbuilt dropmember After much heating and beating this is what I ended up with. When it's laid out(it's up a little in these pics) the header still contacts the arm. Obvoiusly this won't work so the only option is to get another set or have someone modify one (maybe two) of the tubes. I'm leaning towards another set because I don't care for the way the collector points out towards the framerail either. I'm not doing anything until I find a set that will fit for sure with no mods. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-26-2011, 11:25 PM	#9
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: anybody running ls motor with a porterbuilt dropmember Hey backyard is that the musclecar pan kit that you have? Posted via Mobile Device

03-27-2011, 09:44 PM	#10
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: anybody running ls motor with a porterbuilt dropmember Yes Sir! Posted via Mobile Device __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-28-2011, 02:07 AM	#11
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: anybody running ls motor with a porterbuilt dropmember Cool! Ill be ordering it soon! Thanks! Posted via Mobile Device

03-28-2011, 11:38 PM	#12
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: anybody running ls motor with a porterbuilt dropmember Is pretty easy to replace the oil pan and windage trey on the ls motor?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.