PO has me PO'd - Page 62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low'n slow · 11-12-2010, 10:23 PM

Grew up in Idaho. Had alot of California hunters come up and shoot cows. (moo). We started calling them slow elk.

swamp rat · 11-12-2010, 11:26 PM

Thanks again! More great pictures, good river fishing too! course i'm more of a drift fisherman than a fly fisherman..

hgs_notes · 11-13-2010, 09:46 AM

My wifes is from Idaho Falls. We usually go through the park or take the routes south on the west side and through West Yellowstone when we go to visit. Her mom lives in St Anthony where they have the sand dunes. Very fun place to play with a truck. Another good source for solid sheetmetal also.

**jaros44sr** · 11-15-2010, 04:29 PM

Quote:

Originally Posted by low'n slow

Grew up in Idaho. Had alot of California hunters come up and shoot cows. (moo). We started calling them slow elk.

Quote:

Originally Posted by swamp rat

Thanks again! More great pictures, good river fishing too! course i'm more of a drift fisherman than a fly fisherman..

Quote:

Originally Posted by hgs_notes

My wifes is from Idaho Falls. We usually go through the park or take the routes south on the west side and through West Yellowstone when we go to visit. Her mom lives in St Anthony where they have the sand dunes. Very fun place to play with a truck. Another good source for solid sheetmetal also.

I won't comment on the Cali hunters, but your statement is funny...mooooo

swamprat, drift fishing in a drift boat, or a method of fishing?

hgs_notes, I envy all you people that had the chance to grow and live in the great open spaces of our country, I on the other hand only had 1 week to enjoy it, but it will be memories that I keep a lifetime

From Bozeman south for 1 hour I must have seen 30 trucks of our vintage!!

One more day and I will post up more pics of the Lokar install...

swamp rat · 11-15-2010, 04:57 PM

Bank fishing using corkies and yarn, sand shrimp salmon row, allowing the weight to just lightly tap across the bottom on occasion, also spinners and spoons. Where i live now were talking about salmon and steelhead. I don't have a drift boat but its pretty much the same concept, i have been in drift boats and river sleads tho, its a kick in the pants! However i grew up in eastern washington fishing for trout, in rivers and streams i used a lot of wedding rings tipped with a worm or night crawler, sometimes just a worm with some split shot.

**jaros44sr** · 11-15-2010, 07:02 PM

Quote:

Originally Posted by swamp rat

Bank fishing using corkies and yarn, sand shrimp salmon row, allowing the weight to just lightly tap across the bottom on occasion, also spinners and spoons. Where i live now were talking about salmon and steelhead. I don't have a drift boat but its pretty much the same concept, i have been in drift boats and river sleads tho, its a kick in the pants! However i grew up in eastern washington fishing for trout, in rivers and streams i used a lot of wedding rings tipped with a worm or night crawler, sometimes just a worm with some split shot.

understand completely, I've always used a noodle rod, but my son bought a fly rod for me for Christmas, soooo, I've only been flyfishing two or three times. I think he did it because I was catching more fish then he was on the noodle rod

We usually start fishing Salmon in Sept., and then switch over to Steelhead in Nov., Dec. We use drift boats after Dec. as it gets toooo cold to stand in the water for 8-10 hours (15 degrees last Feb)

**jaros44sr** · 11-16-2010, 02:04 PM

had to reverse the mounting plates, since they would interfere with the shift arm, also radiused the plate about 3/32". Then it was just drilling 2 5/16" holes and cutting 2 parallel lines with my Dremel cutoff wheel

bending the ring to match the hump is the next challenge

next step is to work on the actual linkage...problems! Seems the billet aluminum arm on the trans. is better suited for 5/16" then the 1/4" rod and ends that come with the kit. Sooo, calling McMaster-Carr, they had the rod ends and rod instock (5/16"), ship today, have tomorrow. Gotta luv a welled stocked hardware store online

**jaros44sr** · 11-17-2010, 11:57 PM

went a little beefier then the stock screws, it's a truck ,right?
still have to trim the boot more

rod ends w/studs to replace the original parts, 5/16" instead of 1/4"

**jaros44sr** · 11-21-2010, 09:09 PM

the advantage of using a stud on the rod end is that the billet arm has a recess machined in the backside, and this is just the right size to hold the hex head of the stud

don't forget to use anti-sieze on any stainless hardware, or it will gall and snap the bolt...still need to change out to a stud, probably change to LH thread to make it easier the adjust

red71cheyenne · 11-23-2010, 11:19 AM

That is nice! I thought you were building a Jimmy tho, not the space shuttle!!

**jaros44sr** · 11-23-2010, 02:02 PM

that's funny Red

this angle fits your statement better

new set back...
PO felt the need to resize the pivot bolt hole for the transfer case shifter, no provision for the bushing, just drilled and tapped bigger. Out comes the T/C, again!

All I wanted to do was mount the ring and boot, but that ain't happenin' till I fix the pivot bolt, and while I'm in there, I might as well put new seals and bearings in the coupler

red71cheyenne · 11-23-2010, 11:19 PM

Quote:

Originally Posted by jaros44sr

that's funny Red

this angle fits your statement better

new set back...
PO felt the need to resize the pivot bolt hole for the transfer case shifter, no provision for the bushing, just drilled and tapped bigger. Out comes the T/C, again!

All I wanted to do was mount the ring and boot, but that ain't happenin' till I fix the pivot bolt, and while I'm in there, I might as well put new seals and bearings in the coupler

Hehe, well this fits both then:

Houston, we have a problem!

J/K, sorry to hear you have to take it out again, I know re-engineering crap sucks. Luckily, I only had to pull the T/C twice when I put the throwout bearing in backwards.

Big J · 11-24-2010, 09:56 AM

Quote:

Originally Posted by jaros44sr

new set back...
PO felt the need to resize the pivot bolt hole for the transfer case shifter, no provision for the bushing, just drilled and tapped bigger. Out comes the T/C, again!

All I wanted to do was mount the ring and boot, but that ain't happenin' till I fix the pivot bolt, and while I'm in there, I might as well put new seals and bearings in the coupler

Its like it never ends. It takes 10 steps to accomplish a task that should take only one.

At this point in the game we have to laugh at it and then gitrdone

. U can do it Jim!

**jaros44sr** · 11-29-2010, 03:36 PM

Quote:

Originally Posted by Big J

Its like it never ends. It takes 10 steps to accomplish a task that should take only one.

At this point in the game we have to laugh at it and then gitrdone

. U can do it Jim!

thanks J for the support, you and I both know how much goes into a build

COMING SOON!!! at a forum near you...TWIN STICKING the new process NP205 and K case TH 350

might as well right? T/C is already out, and I want to be able to run it in 2WD on the front axle only, thus avoiding the ass end from coming around in the snow!!!

couple coats of rustoleum oil based flat white

swamp rat · 11-30-2010, 12:08 AM

Quote:

Originally Posted by Big J

Its like it never ends. It takes 10 steps to accomplish a task that should take only one.

At this point in the game we have to laugh at it and then gitrdone

. U can do it Jim!

That sounds like my house!!! :p

swamp rat · 11-30-2010, 12:12 AM

Ok, seeing your pic's brought back some memorys i'd just assume forget, all i had was a small 1 ton floor jack and it was not tall enough to lift my T case or my tranny high enough to do the install, so i ended up pushing them off to the side a little and positioned myself under the center of my truck, then i pulled the tranny onto my chest and used my arms and my knee to heft it up into place, then i had to do the same with the T case.. that was a beotch!

**jaros44sr** · 11-30-2010, 03:39 PM

OK, ordered up the Twin Stick and long shift rails from ORD, should be here in a couple days! Since the mount for the shifter doesn't use the factory hole, I can use the defective coupler that is in the truck with new seals from 4X Heaven outta NY

The boot may cause a problem, but what else is new? Right!

**jaros44sr** · 11-30-2010, 03:44 PM

Quote:

Originally Posted by swamp rat

Ok, seeing your pic's brought back some memorys i'd just assume forget, all i had was a small 1 ton floor jack and it was not tall enough to lift my T case or my tranny high enough to do the install, so i ended up pushing them off to the side a little and positioned myself under the center of my truck, then i pulled the tranny onto my chest and used my arms and my knee to heft it up into place, then i had to do the same with the T case.. that was a beotch!

Been there done that

, but I am much wiser to the mechanical techniques for solving problems (hydraulics)

. I'm big on the right tool for the job, plus I'm 60 and still have upper body strength, a trans on my chest would probably break a rib

plus. plus it was only 100 bucks at Harbour Freight

vtblazer · 11-30-2010, 06:41 PM

Quote:

Originally Posted by swamp rat

, so i ended up pushing them off to the side a little and positioned myself under the center of my truck, then i pulled the tranny onto my chest and used my arms and my knee to heft it up into place, then i had to do the same with the T case.. that was a beotch!

Yep been there, own that T-shirt too.

swamp rat · 12-01-2010, 12:57 AM

Quote:

Originally Posted by jaros44sr

Been there done that

, but I am much wiser to the mechanical techniques for solving problems (hydraulics)

. I'm big on the right tool for the job, plus I'm 60 and still have upper body strength, a trans on my chest would probably break a rib

plus. plus it was only 100 bucks at Harbour Freight

LOL! Before the days of Harbor frieght in my area as far as i knew back then, yea should have just looked for a rental or sumthin i guess.

**jaros44sr** · 12-08-2010, 12:07 AM

sorry, just playin with the photobucket, problems downloadin

tool I used to get the second roll pin started

front wheel drive only

vtblazer · 12-08-2010, 07:52 AM

Your going to love the twin stick, comes in handy...a lot!

**jaros44sr** · 12-08-2010, 11:20 AM

Quote:

Originally Posted by vtblazer

Your going to love the twin stick, comes in handy...a lot!

thanks Kurt, saw you use it alot, and had to have one

used some exhaust manifold studs to help get things aligned, don't forget to put it in gear and rotate the tailshaft, don't ask how I know...

problem with the passenger side diagonal brace on the crossmember, need to cut a 1 1/2" square to clear the pivot bolt

vtblazer · 12-08-2010, 07:46 PM

Just make sure the rear of the 205 is mounted correctly, ask me how I know.

**jaros44sr** · 12-08-2010, 10:13 PM

Quote:

Originally Posted by vtblazer

Just make sure the rear of the 205 is mounted correctly, ask me how I know.

Holy crap, there are young guys that read these threads, shouldn't show such ugly pics

are you referring to the side mount, when you state that it needs to be properly mounted???

11-12-2010, 10:23 PM	#1526
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: PO has me PO'd Grew up in Idaho. Had alot of California hunters come up and shoot cows. (moo). We started calling them slow elk.

11-12-2010, 11:26 PM	#1527
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Thanks again! More great pictures, good river fishing too! course i'm more of a drift fisherman than a fly fisherman.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-13-2010, 09:46 AM	#1528
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: PO has me PO'd My wifes is from Idaho Falls. We usually go through the park or take the routes south on the west side and through West Yellowstone when we go to visit. Her mom lives in St Anthony where they have the sand dunes. Very fun place to play with a truck. Another good source for solid sheetmetal also. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-15-2010, 04:57 PM	#1530
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Bank fishing using corkies and yarn, sand shrimp salmon row, allowing the weight to just lightly tap across the bottom on occasion, also spinners and spoons. Where i live now were talking about salmon and steelhead. I don't have a drift boat but its pretty much the same concept, i have been in drift boats and river sleads tho, its a kick in the pants! However i grew up in eastern washington fishing for trout, in rivers and streams i used a lot of wedding rings tipped with a worm or night crawler, sometimes just a worm with some split shot. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-16-2010, 02:04 PM	#1532
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd had to reverse the mounting plates, since they would interfere with the shift arm, also radiused the plate about 3/32". Then it was just drilling 2 5/16" holes and cutting 2 parallel lines with my Dremel cutoff wheel bending the ring to match the hump is the next challenge next step is to work on the actual linkage...problems! Seems the billet aluminum arm on the trans. is better suited for 5/16" then the 1/4" rod and ends that come with the kit. Sooo, calling McMaster-Carr, they had the rod ends and rod instock (5/16"), ship today, have tomorrow. Gotta luv a welled stocked hardware store online __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-16-2010 at 03:09 PM.

11-17-2010, 11:57 PM	#1533
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd went a little beefier then the stock screws, it's a truck ,right? still have to trim the boot more rod ends w/studs to replace the original parts, 5/16" instead of 1/4" __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-18-2010 at 12:01 AM.

11-21-2010, 09:09 PM	#1534
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd the advantage of using a stud on the rod end is that the billet arm has a recess machined in the backside, and this is just the right size to hold the hex head of the stud don't forget to use anti-sieze on any stainless hardware, or it will gall and snap the bolt...still need to change out to a stud, probably change to LH thread to make it easier the adjust __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-22-2010 at 10:03 PM.

11-23-2010, 11:19 AM	#1535
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: PO has me PO'd That is nice! I thought you were building a Jimmy tho, not the space shuttle!! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-23-2010, 02:02 PM	#1536
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd that's funny Red this angle fits your statement better new set back... PO felt the need to resize the pivot bolt hole for the transfer case shifter, no provision for the bushing, just drilled and tapped bigger. Out comes the T/C, again! All I wanted to do was mount the ring and boot, but that ain't happenin' till I fix the pivot bolt, and while I'm in there, I might as well put new seals and bearings in the coupler __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-23-2010 at 02:06 PM.

11-30-2010, 12:12 AM	#1541
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Ok, seeing your pic's brought back some memorys i'd just assume forget, all i had was a small 1 ton floor jack and it was not tall enough to lift my T case or my tranny high enough to do the install, so i ended up pushing them off to the side a little and positioned myself under the center of my truck, then i pulled the tranny onto my chest and used my arms and my knee to heft it up into place, then i had to do the same with the T case.. that was a beotch! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-30-2010, 03:39 PM	#1542
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd OK, ordered up the Twin Stick and long shift rails from ORD, should be here in a couple days! Since the mount for the shifter doesn't use the factory hole, I can use the defective coupler that is in the truck with new seals from 4X Heaven outta NY The boot may cause a problem, but what else is new? Right! __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-08-2010, 12:07 AM	#1546
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd sorry, just playin with the photobucket, problems downloadin tool I used to get the second roll pin started front wheel drive only __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-08-2010 at 02:32 AM.

12-08-2010, 07:52 AM	#1547
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: PO has me PO'd Your going to love the twin stick, comes in handy...a lot!

12-08-2010, 07:46 PM	#1549
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: PO has me PO'd Just make sure the rear of the 205 is mounted correctly, ask me how I know. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.