The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-14-2010, 05:48 PM   #1
shenk10
Registered User
 
shenk10's Avatar
 
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
Costs of Different Engines

I have been thinking about doing a 6.0 swap for a long time now and the time has finally come. I have been going back and forth as to what motor to get. I'm between the LQ4, LQ9, and LS2. I wouldn't mind any of the options but wanted to look at it from a cost perspective. I found an ls2 out of a trailblazer for $3200 and it only has 45,000 miles on it. The only problem with it is the fact that it has a AWD transmission, which I could just take to a trans shop and get them to switch the tailshafts. What prices are people paying for a complete 6.0 swap? If the $3200 price is only a little bit more than what everyone is paying for an LQ4 or LQ9, then I just might jump on that, and I like the fact that I can say I have an ls2 in my truck. Any opinions/options would be greatly appreciated. Thanks.
__________________
Jordan

1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205

1982 Chevy C10 SWB, 2006 LS2/4l70e
In progress....
http://67-72chevytrucks.com/vboard/s...d.php?t=439860

Last edited by shenk10; 11-14-2010 at 05:49 PM.
shenk10 is offline   Reply With Quote
Old 11-14-2010, 06:16 PM   #2
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Costs of Different Engines

I got my mostly complete LQ4 for 800$. Add in my dbw controls, front acc. and ecu, a huge cam kit, and a built 4l80e and im still under the $3200 pricetag.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-14-2010, 09:42 PM   #3
85burb
Registered User
 
85burb's Avatar
 
Join Date: Dec 2009
Location: lindale,tx
Posts: 2,373
Re: Costs of Different Engines

03 LQ4 with eveyting but throttl body and one header shiped accrost the country for 1000. That included alt and starter and power steering. Came from maine tho. Was not a pretty motor but cleaning it up and painting everything should make it look great again. 88xxx miles on it.
__________________
82 c10 5.3/4l60
84 c20 5.3/sm465
85 chevy k10 suburban LQ4/4l60
91 chevy c10 suburban Lsa 5.3/4l60
2017 Silverado whipple 5.3
1964 Vw beetle
1974 vw beetle
85burb is offline   Reply With Quote
Old 11-14-2010, 11:43 PM   #4
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: Costs of Different Engines

I paid $2000 for my 2006 LQ4 with 28K miles. That price included shipping from Michigan to Texas. The motor is complete from fan to flexplate along with the A/C compressor, all the accessories, intake, harness, ex manifolds, computer, dbw pedal, etc.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 11-16-2010, 10:20 AM   #5
shenk10
Registered User
 
shenk10's Avatar
 
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
Re: Costs of Different Engines

thanks for the help guys, where are you getting your swaps from though? I heard some people are getting them through lqk, for reasonable prices.
__________________
Jordan

1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205

1982 Chevy C10 SWB, 2006 LS2/4l70e
In progress....
http://67-72chevytrucks.com/vboard/s...d.php?t=439860
shenk10 is offline   Reply With Quote
Old 11-16-2010, 12:03 PM   #6
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: Costs of Different Engines

I looked at LKQ quite a bit but they didn't have what I was looking for at the time. I ordered mine from Schram Auto in Michigan. They specialized in pull-outs intended for swaps like ours. They weren't the absolute cheapest, but they had a great selection and were knowledgeable about what was needed and not needed when doing this sort of drive train transplant. Most of the other "salvage yards" I called were happy to sell me an engine, but it was stripped down, not complete like this.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com

Last edited by Critter; 11-16-2010 at 12:03 PM.
Critter is offline   Reply With Quote
Old 11-16-2010, 03:41 PM   #7
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Costs of Different Engines

I found mine through car-part, I liked not having to ship the engine and got it with a fire-up and 90day hard part warranty.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-20-2010, 05:24 PM   #8
tapeworm
fan of "Butters" Stotch
 
tapeworm's Avatar
 
Join Date: Dec 2009
Location: St. Paul, MN
Posts: 267
Re: Costs of Different Engines

try car-part.com

These will mostly be stipped engines, may be worth it looking. Once in a while there will be complete take outs listed.

LQ4s are usually the cheapest (pickups and vans), and a bit more for LQ9s (escalades denalis)
__________________
64 shortbox fleetside
replacing rusty junk with more junk, and one day to become a real truck again
tapeworm is offline   Reply With Quote
Old 11-20-2010, 06:30 PM   #9
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Costs of Different Engines

if you're looking for a 6.0 liter specifically....don't forget the '07up (?'06) LY6 gen IV with VVT and L92/LS3 heads.
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 11-21-2010, 03:55 AM   #10
shenk10
Registered User
 
shenk10's Avatar
 
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
Re: Costs of Different Engines

The LY6 come with the l92 heads? I was going to do the l92 head swap anyway, but i thought they came only on the 6.2 L
__________________
Jordan

1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205

1982 Chevy C10 SWB, 2006 LS2/4l70e
In progress....
http://67-72chevytrucks.com/vboard/s...d.php?t=439860
shenk10 is offline   Reply With Quote
Old 11-21-2010, 01:13 PM   #11
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Costs of Different Engines

yup.....here's mine:


offset rockers:
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 11-21-2010, 02:47 PM   #12
kSStamp0182
LSX addict
 
kSStamp0182's Avatar
 
Join Date: Jun 2009
Location: Tyler, Texas
Posts: 262
Re: Costs of Different Engines

i got mine from the same place as 85burb, 2,000 for a 01 LQ4/4L80E complete with everything, harness, starter, and all accessories, etc shipped. 96k miles. i think it was a damn good deal, i called em an we worked out a deal.
kSStamp0182 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com