Gauge pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 06-19-2003, 12:28 PM

Does anyone have any close up shots of Autometer gauges mounted from the outside of the bezel? I guess you would probably call it top mounted. Not like Swervin's, I would call his bottom mounted. Even though his gauges are bad a$$, I don't think I enough patients to do mine like that.

bigblock73 · 06-19-2003, 12:44 PM

Eddie has his done that way...maybe his slacker butt will chime in!

...Jeff

BigRed · 06-19-2003, 01:48 PM

There's a couple on here, but not sure if they're are close enough for you.

http://www.shelbournes.net/trucksite...iors/index.htm

gldevall · 06-19-2003, 02:55 PM

Thanks Scott, but I really need something a little closer.

PHOENIX · 06-19-2003, 04:33 PM

Scott has pictures of mine on that link and if you click them they will get a little larger. Let me know what you are looking for as far as details or something and I can post some pictures or email them to you depending on the picture size.

<-------- Been slackin' online, but getting a lot of work done

<--- I like!

gldevall · 06-20-2003, 09:12 AM

Yeah Eddie, I want to install mine the way your's are. I already have the fuel gauge in, but wanted to see how it compares with some others. IF you could email a couple of pics to devall@cox.net I would really appreciate it.

PHOENIX · 06-20-2003, 11:03 AM

You've Got Mail

TIMSPEED · 06-21-2003, 06:29 AM

Eddie,
Did you use the stock bezel, or did you just put in a piece of plastic and cut it?

PHOENIX · 06-21-2003, 01:43 PM

stock bezel

81chevystep · 06-22-2003, 08:54 PM

is this what you are talking about

gldevall · 06-22-2003, 09:26 PM

Yeah that's it. Where did you get the billet from? Thanks.

81chevystep · 06-22-2003, 11:33 PM

i got it from trenz but i orderd it through a local custom shope it cost about $100 but you have to make the holes bigger to fit the guages in them.

PHOENIX · 06-23-2003, 10:36 AM

They have polished and brushed finish.
Make sure you get the one you want.
Everyone sells the brushed, but I guess the polished are harder to find. Contact Swervin for info on the polished one.

82 'ject · 07-03-2003, 11:33 PM

Phoenix, it appears that your gauges point directly forward as opposed to upward towards the driver. If this is accurate does it affect how well you can see the gauges?

82 'ject · 07-03-2003, 11:35 PM

Sorry my previous post was for 82 chevystep

81chevystep · 07-04-2003, 12:51 PM

they do point straight forward and i can see all of the guages fine. hope that helps.

Jonboy · 07-04-2003, 01:11 PM

are those 2 5/8 gauges or 2 1/16 for the small? I am guessing the larger ones are 5"?

bigblock73 · 07-04-2003, 01:16 PM

they are 2 5/8" I believe.

bigd65 · 07-05-2003, 11:27 AM

81, that looks awwsome

kevhill85 · 07-05-2003, 08:30 PM

here the pic of mine . it u go to the web site there is a few more

kevhill85 · 07-05-2003, 08:35 PM

this will tell what gauges i use and part numbers

http://www.mychevytruck.com/showowne...&n=84329&pos=3

06-19-2003, 12:28 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Gauge pics Does anyone have any close up shots of Autometer gauges mounted from the outside of the bezel? I guess you would probably call it top mounted. Not like Swervin's, I would call his bottom mounted. Even though his gauges are bad a$$, I don't think I enough patients to do mine like that. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-19-2003, 01:48 PM	#3
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	There's a couple on here, but not sure if they're are close enough for you. http://www.shelbournes.net/trucksite...iors/index.htm __________________ Scott Shelbourne

06-19-2003, 02:55 PM	#4
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Thanks Scott, but I really need something a little closer. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-19-2003, 04:33 PM	#5
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Scott has pictures of mine on that link and if you click them they will get a little larger. Let me know what you are looking for as far as details or something and I can post some pictures or email them to you depending on the picture size. <-------- Been slackin' online, but getting a lot of work done <--- I like! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

06-20-2003, 09:12 AM	#6
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Yeah Eddie, I want to install mine the way your's are. I already have the fuel gauge in, but wanted to see how it compares with some others. IF you could email a couple of pics to devall@cox.net I would really appreciate it. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-19-2003, 12:44 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Eddie has his done that way...maybe his slacker butt will chime in! ...Jeff

06-20-2003, 11:03 AM	#7
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	You've Got Mail __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

06-21-2003, 06:29 AM	#8
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Eddie, Did you use the stock bezel, or did you just put in a piece of plastic and cut it? __________________ I have a few cars... See Them Here

06-21-2003, 01:43 PM	#9
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	stock bezel __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

06-22-2003, 08:54 PM	#10
81chevystep ShadeTree Kustomz Join Date: Dec 2002 Location: spring, texas Posts: 300	is this what you are talking about Attached Images

06-22-2003, 09:26 PM	#11
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Yeah that's it. Where did you get the billet from? Thanks. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-22-2003, 11:33 PM	#12
81chevystep ShadeTree Kustomz Join Date: Dec 2002 Location: spring, texas Posts: 300	i got it from trenz but i orderd it through a local custom shope it cost about $100 but you have to make the holes bigger to fit the guages in them.

06-23-2003, 10:36 AM	#13
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	They have polished and brushed finish. Make sure you get the one you want. Everyone sells the brushed, but I guess the polished are harder to find. Contact Swervin for info on the polished one. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

07-03-2003, 11:33 PM	#14
82 'ject Alleged Member Join Date: Jul 2003 Location: Athens, AL Posts: 79	Phoenix, it appears that your gauges point directly forward as opposed to upward towards the driver. If this is accurate does it affect how well you can see the gauges?

07-03-2003, 11:35 PM	#15
82 'ject Alleged Member Join Date: Jul 2003 Location: Athens, AL Posts: 79	Sorry my previous post was for 82 chevystep



Register or Log In To remove these advertisements.

07-04-2003, 12:51 PM	#16
81chevystep ShadeTree Kustomz Join Date: Dec 2002 Location: spring, texas Posts: 300	they do point straight forward and i can see all of the guages fine. hope that helps.

07-04-2003, 01:11 PM	#17
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	are those 2 5/8 gauges or 2 1/16 for the small? I am guessing the larger ones are 5"? __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-04-2003, 01:16 PM	#18
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	they are 2 5/8" I believe.

07-05-2003, 11:27 AM	#19
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	81, that looks awwsome __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

07-05-2003, 08:30 PM	#20
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	here the pic of mine . it u go to the web site there is a few more Attached Images __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

07-05-2003, 08:35 PM	#21
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	this will tell what gauges i use and part numbers http://www.mychevytruck.com/showowne...&n=84329&pos=3 __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

Register or Log In To remove these advertisements.