|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-18-2010, 07:31 PM
|
#1 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
what does a-body or f-body mean?
I've been looking at control-arms and other suspension stuff....
I have noticed a lot is categorized as for a-body or f-body. are our trucks (60-up) classified as a-body, or is only for passenger cars? some suspension stuff says a-body, and then sometimes you see a grouping for trucks, so I was curious.....
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny 
|
|
|
|
12-18-2010, 07:35 PM
|
#2 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: what does a-body or f-body mean?
Quote:
f-body = sport (Camaro, Firebird) x-body = Nova, Ventura, Apollo y-body = Vette g-body = metric chassis mid size (Malibu/MonteCarlo, Regal, Cutlass Supreme, Buick GN b-body = full size (Caprice, Impala) Trucks are . . .... C-10 (Chevy) c1500 (GMC) = 1/2 ton 2wd C-20 / c2500 = 3/4 ton C-30 / c3500 = 1-ton There were different 'tags' applied over the years for the truck models so these are just the basics.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 12-18-2010 at 07:41 PM. |
|
|
|
|
|
12-18-2010, 07:44 PM
|
#3 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: what does a-body or f-body mean?
It was used to classify goroups of cars the used similar parts when crossing "brand name" lines. I.E. Camaro/Firebird, the basic car was the same. They had some sheetmetal differences and trim parts were different, but the main "core" of the car was the same.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
12-18-2010, 08:15 PM
|
#4 |
|
Registered User
Join Date: Jul 2009
Location: Wylie Texas
Posts: 91
|
Re: what does a-body or f-body mean?
if your looking at arms you will need to keep in the year range of your truck. in the case of the trucks from 63-66 and 67-72 you can swap in the 73-87 arms and get the disc brakes with very little effort. plus that also opens you up to running 73-87 drop springs, drop spindles etc.
The other year ranges for 1/2 ton trucks are 88-98, 99-06, 07-10, maybe 11. the 3/4 and one ton trucks have some overlapping years, like Duallys and Suburbans went farther than the 1/2 ton trucks did. Thats one good thing about Generic Motors, everything is the same and lots of things interchange. |
|
|
|
|
12-19-2010, 11:31 AM
|
#5 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Re: what does a-body or f-body mean?
Thanks for the info guys, that clears a lot up.....
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
