Project '86 - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dv8customs · 12-26-2010, 09:49 PM

Got some Mittler Bros Flare Dies for Christmas, can't wait to get started on my interior...

Need to clean up my bead roller dies a bit first though...

spudz · 12-26-2010, 10:41 PM

just wondering. Maybe its just me or the way I am looking at it. Is the bed slanted to the rear? if you look at the body line it kinda looks like the center of the truck is higher and the bed slants down hill. I have seen a few pics of trucks that looks like this. Jus wondering if it was jus tme.

dv8customs · 12-26-2010, 11:00 PM

I might be a little low in the rear. That last pick makes it look real bad but it's not off that much if any. I basically used the gap to the cab and eyeballed it straight.

spudz · 12-26-2010, 11:09 PM

its prolly just the angle. Cant wait to see what you build with the dies!

inovermyhead · 12-27-2010, 01:36 PM

As weird as it may sound I'd really like to see more pics of that full size Chevy van w/the orange flames from turkey drag if anyone has pics.

kSStamp0182 · 12-28-2010, 07:19 PM

Quote:

Originally Posted by inovermyhead

As weird as it may sound I'd really like to see more pics of that full size Chevy van w/the orange flames from turkey drag if anyone has pics.

NZSquare · 12-28-2010, 10:33 PM

Quote:

Originally Posted by dv8customs

I might be a little low in the rear. That last pick makes it look real bad but it's not off that much if any. I basically used the gap to the cab and eyeballed it straight.

Awesome build, every mod is subtle, it must drive the purists mental at shows trying to figure out what you've done.

I had this dilemma with the bodyline and have seen it on most other bagged c-10's, I believe it because the bodyline dips down as it gets towards the front, so if the back is sitting lower than the front and the forward bodyline is levelish it makes the back look wonky. I only cottoned on when I had the back sitting up a bit and it looked right.

Thanks for the constant updates and pics to.

inovermyhead · 12-29-2010, 11:20 AM

Any idea if any interior work done in that van? You don't see too many vans out there custom like that so it's nice to see when one comes around. Maybe I appreciate vans b/c I took my driver's test in one and I work on wheelchair lifts in vans all day too

allen.carabajal · 01-23-2011, 12:04 AM

hey what do you plan to do with those 22" coys at the begining of the project

WillieloRidez · 01-23-2011, 11:57 AM

Quote:

Originally Posted by allen.carabajal

hey what do you plan to do with those 22" coys at the begining of the project

If i remember right he was borrowing them from a friend

*87 chevy silverado* · 01-23-2011, 02:21 PM

Quote:

Originally Posted by WillieloRidez

If i remember right he was borrowing them from a friend

x2

dv8customs · 01-24-2011, 08:31 PM

X3, I gave them back so he could put them on his bodied crew cab. I just borrowed them to check clearances

3r!c84 · 01-24-2011, 08:44 PM

got any updates?

dbmx66 · 01-31-2011, 02:21 AM

Quote:

Originally Posted by 3r!c84

got any updates?

x2

dv8customs · 01-31-2011, 02:05 PM

No updates, it's been pretty cold and lots of rain so no work is being done.

inovermyhead · 01-31-2011, 05:06 PM

Quote:

Originally Posted by dv8customs

No updates, it's been pretty cold and lots of rain so no work is being done.

Dude x2 this weather sucks this time a year. At least we're not buried in snow though. I don't think I've touched mine since November

allen.carabajal · 02-10-2011, 12:27 AM

ohhh okk thanks!

dv8customs · 02-14-2011, 03:49 PM

Okay, I am marking TEX MEX on my calendar for my first show this year. It is April 15-17 so not a whole lot of time to get some more work done. Weather is getting nicer so hope to have progress up soon...

**kev2809** · 02-14-2011, 04:44 PM

looking forward to the progress. tex mex was supposed to be my first go at it but not sure now...lot of things getting in the way. still plan on making the show as a spectator at least. whats the plans for the interior?

dv8customs · 02-14-2011, 05:15 PM

Quote:

Originally Posted by kev2809

whats the plans for the interior?

Haven't really thought that far ahead yet. I have a few ideas but nothing solid yet.

dv8customs · 02-18-2011, 12:02 PM

No build progress but I ordered a set of these to fab some new motor mounts

[img]http://www.*****************/files/4-Link_Weld_on_Bar_Ends_0.jpg[/img]

and a set of 480's

[img]http://www.*****************/files/Viair480DualPackSilver.jpg[/img]

*Stitch* · 02-18-2011, 01:22 PM

What motor are you going with?
Posted via Mobile Device

dv8customs · 02-18-2011, 01:46 PM

Quote:

Originally Posted by Stitch

What motor are you going with?
Posted via Mobile Device

Going with what was already in it 350/350

Muney · 02-18-2011, 08:23 PM

Loving your truck, keep up the good work!

dv8customs · 02-19-2011, 07:41 PM

Quote:

Originally Posted by Muney

Loving your truck, keep up the good work!

Thanks

12-26-2010, 09:49 PM	#801
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Got some Mittler Bros Flare Dies for Christmas, can't wait to get started on my interior... Need to clean up my bead roller dies a bit first though...

12-26-2010, 10:41 PM	#802
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Project '86 just wondering. Maybe its just me or the way I am looking at it. Is the bed slanted to the rear? if you look at the body line it kinda looks like the center of the truck is higher and the bed slants down hill. I have seen a few pics of trucks that looks like this. Jus wondering if it was jus tme. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

12-26-2010, 11:00 PM	#803
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 I might be a little low in the rear. That last pick makes it look real bad but it's not off that much if any. I basically used the gap to the cab and eyeballed it straight. Last edited by dv8customs; 12-26-2010 at 11:01 PM.

12-26-2010, 11:09 PM	#804
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Project '86 its prolly just the angle. Cant wait to see what you build with the dies! __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

12-27-2010, 01:36 PM	#805
inovermyhead Registered User Join Date: May 2010 Location: Shreveport, LA Posts: 115	Re: Project '86 As weird as it may sound I'd really like to see more pics of that full size Chevy van w/the orange flames from turkey drag if anyone has pics. __________________ 81 GMC C15 RC SWB 5.3L 4L80E project

12-29-2010, 11:20 AM	#808
inovermyhead Registered User Join Date: May 2010 Location: Shreveport, LA Posts: 115	Re: Project '86 Any idea if any interior work done in that van? You don't see too many vans out there custom like that so it's nice to see when one comes around. Maybe I appreciate vans b/c I took my driver's test in one and I work on wheelchair lifts in vans all day too __________________ 81 GMC C15 RC SWB 5.3L 4L80E project

01-23-2011, 12:04 AM	#809
allen.carabajal Registered User Join Date: Jan 2011 Location: iola, Tx Posts: 2	Re: Project '86 hey what do you plan to do with those 22" coys at the begining of the project

01-24-2011, 08:31 PM	#812
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 X3, I gave them back so he could put them on his bodied crew cab. I just borrowed them to check clearances

01-24-2011, 08:44 PM	#813
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Project '86 got any updates? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

01-31-2011, 02:05 PM	#815
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 No updates, it's been pretty cold and lots of rain so no work is being done.

02-10-2011, 12:27 AM	#817
allen.carabajal Registered User Join Date: Jan 2011 Location: iola, Tx Posts: 2	Re: Project '86 ohhh okk thanks! __________________ {81 chevy}

02-14-2011, 03:49 PM	#818
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 Okay, I am marking TEX MEX on my calendar for my first show this year. It is April 15-17 so not a whole lot of time to get some more work done. Weather is getting nicer so hope to have progress up soon...

02-14-2011, 04:44 PM	#819
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Project '86 looking forward to the progress. tex mex was supposed to be my first go at it but not sure now...lot of things getting in the way. still plan on making the show as a spectator at least. whats the plans for the interior? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

02-18-2011, 12:02 PM	#821
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: Project '86 No build progress but I ordered a set of these to fab some new motor mounts [img]http://www.***************/files/4-Link_Weld_on_Bar_Ends_0.jpg[/img] and a set of 480's [img]http://www.***************/files/Viair480DualPackSilver.jpg[/img]

02-18-2011, 01:22 PM	#822
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Project '86 What motor are you going with? Posted via Mobile Device



Register or Log In To remove these advertisements.

02-18-2011, 08:23 PM	#824
Muney Registered User Join Date: Jan 2011 Location: Maryland Posts: 47	Re: Project '86 Loving your truck, keep up the good work!

Register or Log In To remove these advertisements.