Your 2011 Plans For Your 60-66?

[NuBomb]

I plan to bring the parts that are currently sitting in the cab outside into the basement. I have some parts in a stall in the barn that also need to come in. I hope to make a dolly for the cab and put a tarp over the darn thing. I've got to decide whether to build a 2-wheel drive or stick with my original plan of a 4-wheel drive. I guess the main plan is to allow it to continue to age. Of course it would be cool to find some axles and springs to put under the frame, but I don't want to over-reach.

[slepysal]

install 1967 rear end ,front disc brakesand cruise it

[Mad Rods]

Buy and install big brake kit,(drilled and slotted 5 lug) wheels and tires,finish body work,new front fenders, bumpers and air management kit.
Posted via Mobile Device

[Notch1988]

Hmmm... install new rear bumper, new door locks, seatbelts and mirrors. Rattle can paint the box to match the front a bit better. Install the LS 6.0L/4L80 that I just finished pulling from the donor truck. Pipe c-notch the rear too.

[KIC]

Just want to get that beast painted so I can bring it home. ( this week, I hope I hope I hope)

[Tommy454]

Battery, brakes and a windshield. Then drive it like I stole it!

[RollinKaos]

Front disc brake conversion w/ drop spindles, 2 in spacers and a CPP C notch in rear , swap in the 12 bolt rear diff out of my 77 blazer. Replace the missing drivers side window.

Would love to find a 3 duece intake set up too.

['70GMCStep]

Two if not all three of new wiring harness, bed floor and stereo system.

Happy new year everybody,

'70GMCStep


'65 Chevy C-10
'70 GMC Stepside

[narx66gmc]

finish the 4 nagging things left to do then drive it as is. full daily by May is the goal.

[gulffishin]

rebuild my carb (done01/02/10), replace the plug wires, finish bolting down the wood in my bed, change the 2 yr old oil filter....

[97gase]

I hope to sort through my pile of parts and have enough to build a truck. I may try to trade my almost running 81 Short wide with 454/th400 for a running 60-66 c10.

[TwoFiftyShifter]

Put it back together, prime it, and drive it as much as I want.....

[pedro6371]

hope still working and put it back together and drive it

[LostMy65]

Mechanically sound.
Then I will move on to looks.
For 2011 = get it to be a safe and dependable rig - that's it.

[Q.8]

take the 6cly engine out,,,put the v8 305 (i have it )

just it will cost me too much coz i want to make the engine chrome full

then finish the interior

[jonzcustomshop]

alot of cutting welding, an engine swap, and maybe a brake job....

we'll see what happens.

oh, and maybe buy a couple more trucks too.

[chevytrucknut61]

I just want to stop the transmission leak. thats been nagging me for months. Thats why I haven't drove it for quite a while.

[duallyjams]

2wd to 4x4 conversion.
Already have D-60 with 52" springs for the front. Corp 14 and 63" for the rear.NV4500 with a np205 and use the GMC V6 305 ( will update to a 401M at a later date )

[65Gregg]

I'll drive mine to Hoedown and Lonestar Roundup, maybe put my ZZ4 in sometime between now and then. Powdercoat my new instument insert,billet doesn't fit my truck...build a fan shroud. Mostly just continue driving the wheels off of it

[SCOTI]

Swap the body to the 'new' chassis & maybe even get to drive it . . .....

[Rich 5150 69]

Hopefully retire then I can actually work on mine

[rustyrodknocker]

put more metal in than falls out.

[Cops053]

Plan to rebuild the 350.....using oil somwhere, while the engine is out will repaint the engine compartment, also a complete brake job. After that if the cash cow holds out, hope to redo the interior

[Laz]

My plans? Actually work on it.

More specifically, however, I hope to find a frame that we can steal from another truck to put under my '66.

That's about the only goal I have set for it. Gotta keep it realistic as far as I'm capable of doing.

[Clyde65]

Ummm, I would like to repaint it....unless the body shop will do it for free, I don't see it happening in 2011.