OR Parting out 1970 GMC C10 350,TH350, 3.73 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 01-02-2011, 05:32 PM

Spid close up. The interior color is gold.

close up of shift linkage

stiching coming loose on one visor otherwise very nice

armrest close up of sun burn?

**tll74** · 01-02-2011, 05:39 PM

more pics

Davedr · 01-02-2011, 07:46 PM

I will pass on the Power Booster but will take both vent windows and the horn if you have one.How much will it be shipped to 75236?

**tll74** · 01-02-2011, 10:35 PM

Quote:

Originally Posted by Davedr

I will pass on the Power Booster but will take both vent windows and the horn if you have one.How much will it be shipped to 75236?

Shipping to TX 21.00. Which horn the high note or low? or both?

**tll74** · 01-02-2011, 10:36 PM

grill pics for fastfinishes

The chrome shines nice. It looks way better than the pic shows. The tape marks each spot there is a ding. All are minor except the one in the center bar on the RH side. 90% of it would be gone with some minor metal working.

Davedr · 01-02-2011, 10:47 PM

both

**tll74** · 01-03-2011, 12:33 AM

Quote:

Originally Posted by Davedr

both

PM sent

67 c10 guy · 01-03-2011, 01:09 AM

e-brake cable from cab to rear loop 12.50
e-brake cable rear loop with three supports and couplers 15.00
if it will work on a 67
shipping to 77505

**FL71C10** · 01-03-2011, 01:33 AM

I'll take the shift linkage. I'll send paypal in the morning.
Thanks!
Posted via Mobile Device

**tll74** · 01-03-2011, 02:39 AM

Quote:

Originally Posted by 67 c10 guy

e-brake cable from cab to rear loop 12.50
e-brake cable rear loop with three supports and couplers 15.00
if it will work on a 67
shipping to 77505

The cable from the cab to the frame is 67-68 and 69-72. 67 and 68 have a hand opperated e-brake and 69-up it is a foot type. Sorry

**FL71C10** · 01-03-2011, 10:20 AM

Paypal sent for the shift linkage!

*sharpie1972* · 01-03-2011, 11:42 AM

Just checking back on inside wiring and TH350 kickdown cable. Sharpie

Solego · 01-03-2011, 04:52 PM

I'll take that rear most crossmember in the pic. How about $25 + shipping to 32669?

Cisco714 · 01-03-2011, 06:04 PM

Quote:

Originally Posted by tll74

Solego: This truck will be stripped down to bare frame over the weekend. I have already posted picks on post #36. Should you decide it would ship as early as monday. I would let it go for 30.00 plus.

Davedr: pics to come Friday, It looks and works perfectly fine. It has been painted black. The prior owner said he recently replaced it.

sjarrett71: TH350 slip yoke 32.00 shipped

Cisco714: PM sent back and thanks!

70cst: Thanks, I was working on the list from the beginning just took me awhile. It won't happen again! I thought maybe I was going to the board Jail for a bit.

Quote:

Originally Posted by Cisco714

Ill take the rear sliding window.. 45.00 for window plus 26.00 for shipping= 71.00 Thanks, PM sent.

Paypal payment sent
Thanks, Cisco

burb71 · 01-03-2011, 06:05 PM

If still aval I need the factory exhaust hangers.

**tll74** · 01-03-2011, 10:02 PM

Quote:

Originally Posted by burb71

If still aval I need the factory exhaust hangers.

The only part of the hangers that is any good is the riveted bracket to the frame. Is that what you need?

bollybib · 01-03-2011, 10:02 PM

I need the clamp that goes around the steering column and clamps it to the firewall bracket in the engine compartment. Should be a 3-piece assembly; strap, bolt, nut.

**tll74** · 01-03-2011, 10:17 PM

Quote:

Originally Posted by bollybib

I need the clamp that goes around the steering column and clamps it to the firewall bracket in the engine compartment. Should be a 3-piece assembly; strap, bolt, nut.

bollybib: 4.00 for clamp bolt nut washer 4.95 shipping usps. Anything else you need to soften the shipping cost?

**tll74** · 01-03-2011, 10:21 PM

Quote:

Originally Posted by Solego

I'll take that rear most crossmember in the pic. How about $25 + shipping to 32669?

I have already met you in the middle at 30.00, It has to be worth that to cut it out. I will acid dip it for free and ship it to you rust FREE!

roger0080 · 01-03-2011, 11:43 PM

Quote:

Originally Posted by mgkgmc

What color is that for the interior? Can you get a pic of the spid. If is gold I'm interested in it all not looking for parchment though.

Quote:

Originally Posted by tll74

They are a light tan or beige. The spid shows the interior color is gold.

Quote:

Originally Posted by mgkgmc

Im sorry but I asked first on the interior including the visors. I am still interested if you could check the spid tan will work fo me.

Quote:

Originally Posted by tll74

Spid close up. The interior color is gold.

I would like to buy the rear view mirror.

Is mgkgmc going to commit to buying ALL the interior parts like he said he would if it was a Gold interior, which it is, or how long do we have to wait for him ??? He's laying clam to the mirror.

You've answered his questions prior to posting the SPID picture and he still wouldn't commit to buying it.
You posted the SPID picture and we yet to hear back from him. It's been almost day and a half now.

If you can put me down for the mirror I would also like to buy:
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself?
How much for the instrument face plate only? It ain't pretty I know, but if it's cheap enough maybe I can use it.

Thanks.
P.S. That heater stove box sure looks purdy.

**tll74** · 01-04-2011, 02:58 AM

Quote:

Originally Posted by roger0080

I would like to buy the rear view mirror.

Is mgkgmc going to commit to buying ALL the interior parts like he said he would if it was a Gold interior, which it is, or how long do we have to wait for him ??? He's laying clam to the mirror.

You've answered his questions prior to posting the SPID picture and he still wouldn't commit to buying it.
You posted the SPID picture and we yet to hear back from him. It's been almost day and a half now.

If you can put me down for the mirror I would also like to buy:
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself?
How much for the instrument face plate only? It ain't pretty I know, but if it's cheap enough maybe I can use it.

Thanks.
P.S. That heater stove box sure looks purdy.

roger0080: All the listed parts are yours. Spid free with the purchase and 15.00 for the face plate. As for the interior parts I have asked for advice from a moderator. We all get busy from day to day and strugle finding time to deal with everything. But on the other hand business is business. I do need to sell this stuff and move on. I will put you in first place pending the reponse from the board gods. Thanks, Tom

burb71 · 01-04-2011, 03:31 AM

Quote:

Originally Posted by tll74

The only part of the hangers that is any good is the riveted bracket to the frame. Is that what you need?

Yes thats what I need, I have the rear mounted ones I need the farward mounted ones

breeh · 01-04-2011, 04:51 AM

Interested in booster, master cylinder, and prop valve. Will you go $75.00 shipped? My zip is 98045.

Solego · 01-04-2011, 08:33 AM

Quote:

Originally Posted by tll74

I have already met you in the middle at 30.00, It has to be worth that to cut it out. I will acid dip it for free and ship it to you rust FREE!

lol

I'm negotiating with several different people for one. I will definitely pay $30 + shipping if you dip it!

What do I do?

skeeterbug · 01-04-2011, 09:40 AM

how much for the throttle pedal and assembley shipped to 37184?

01-02-2011, 05:32 PM	#76
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Spid close up. The interior color is gold. close up of shift linkage stiching coming loose on one visor otherwise very nice armrest close up of sun burn? Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2011, 05:39 PM	#77
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 more pics Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2011, 07:46 PM	#78
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I will pass on the Power Booster but will take both vent windows and the horn if you have one.How much will it be shipped to 75236? Last edited by Davedr; 01-02-2011 at 07:47 PM.

01-02-2011, 10:36 PM	#80
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 grill pics for fastfinishes The chrome shines nice. It looks way better than the pic shows. The tape marks each spot there is a ding. All are minor except the one in the center bar on the RH side. 90% of it would be gone with some minor metal working. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 01-02-2011 at 10:43 PM.

01-02-2011, 10:47 PM	#81
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Parting out 1970 GMC C10 350,TH350, 3.73 both

01-03-2011, 01:09 AM	#83
67 c10 guy Registered User Join Date: Jan 2009 Location: 77042, Texas Posts: 102	Re: Parting out 1970 GMC C10 350,TH350, 3.73 e-brake cable from cab to rear loop 12.50 e-brake cable rear loop with three supports and couplers 15.00 if it will work on a 67 shipping to 77505 __________________ 67 C10 longbed 350/th350 13 Ford Fusion 2.0T daily 67 lwb build sold

01-03-2011, 01:33 AM	#84
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,510	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I'll take the shift linkage. I'll send paypal in the morning. Thanks! Posted via Mobile Device __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-03-2011, 10:20 AM	#86
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,510	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Paypal sent for the shift linkage! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-03-2011, 11:42 AM	#87
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Just checking back on inside wiring and TH350 kickdown cable. Sharpie

01-03-2011, 04:52 PM	#88
Solego Dr. Frankentruck's Monster Join Date: Aug 2007 Location: Gainesville, FL Posts: 147	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I'll take that rear most crossmember in the pic. How about $25 + shipping to 32669? __________________ I'm not prejudiced, I hate everyone. Project SLOMO http://67-72chevytrucks.com/vboard/s...d.php?t=430494

01-03-2011, 06:05 PM	#90
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out 1970 GMC C10 350,TH350, 3.73 If still aval I need the factory exhaust hangers.

01-03-2011, 10:02 PM	#92
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I need the clamp that goes around the steering column and clamps it to the firewall bracket in the engine compartment. Should be a 3-piece assembly; strap, bolt, nut.

01-04-2011, 04:51 AM	#98
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Interested in booster, master cylinder, and prop valve. Will you go $75.00 shipped? My zip is 98045. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-04-2011, 09:40 AM	#100
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: Parting out 1970 GMC C10 350,TH350, 3.73 how much for the throttle pedal and assembley shipped to 37184? __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.