injector placement question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87chevy.com · 01-09-2011, 07:29 PM

I couldnt think of a better title. Basically I am going to be re-doing the engine harness with some

and while staring at the engine, I was thinking about rotating the injectors 180* so the connector is pointing towards the intake v/s stock position of pointing outwards. I think this will make the engine harness a little cleaner. I dont think it will affect driveability b/c of the injectors are rotated, but I dont know.
Anyone here done something like this before?

clint

67C10BUB · 01-09-2011, 08:17 PM

I thought that they only went in one way. I just had my injectors cleaned and the clips would only go on if the injector is placed that way. Maybe that's only on the 2008 and up.

blazerboy72 · 01-09-2011, 09:15 PM

I have an 01 and an 04 both with the injectors turned in to help hide the wiring.

01-09-2011, 07:29 PM	#1
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	injector placement question I couldnt think of a better title. Basically I am going to be re-doing the engine harness with some and while staring at the engine, I was thinking about rotating the injectors 180* so the connector is pointing towards the intake v/s stock position of pointing outwards. I think this will make the engine harness a little cleaner. I dont think it will affect driveability b/c of the injectors are rotated, but I dont know. Anyone here done something like this before? clint __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

01-09-2011, 08:17 PM	#2
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: injector placement question I thought that they only went in one way. I just had my injectors cleaned and the clips would only go on if the injector is placed that way. Maybe that's only on the 2008 and up. __________________ 67 5.3L Build

01-09-2011, 09:15 PM	#3
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: injector placement question I have an 01 and an 04 both with the injectors turned in to help hide the wiring.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.