lets see your eagle alloys 225!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bbbc10 · 01-12-2011, 11:49 AM

just like the title says..lets see your eagle alloys 225 and your drop an tire size. thanx

benscool1 · 01-17-2011, 10:00 AM

I agree, let's see em!
Posted via Mobile Device

muthstryker · 01-17-2011, 05:09 PM

I dont have them anymore but here ya go..

6/8 Drop
20x8.5 Front Nitto INVO 245/35/20
20x10 Rear Nitto INVO 295/35/20

And heres one with the truck sitting level due to a pallet full of wood in the bed!

LivNLo94 · 02-15-2011, 08:59 AM

DJM 5/5 Kit, Belltech Nitro Drop 2 Shocks, 295/30ZR20 Rear, 255/35ZR20 Front
Rides Nice! I might cut the springs and add shackles....

*JCampbell* · 02-05-2013, 08:39 PM

TTT !
Posted via Mobile Device

*JCampbell* · 06-13-2013, 04:58 PM

Where did you guys get your 225s? Thinking about picking up a set.

osaltyone · 06-14-2013, 11:10 AM

Was trying to get a set, but they don't have the backspacing I need in stock. Every vendor I spoke with says on back order with no date for shipping in the backspacing I wanted...
Posted via Mobile Device

*JCampbell* · 06-14-2013, 11:42 AM

Hmmm...

Kinda torn. It's between these and the Boss 335's. Currently leaning toward the 335s.

osaltyone · 06-14-2013, 12:47 PM

That is what I ended up with. Have to have my rotors machined down though because the bore on the 20x8.5 is tight. I like the look of the 225s better though.
Posted via Mobile Device

Jmiller022 · 06-14-2013, 12:54 PM

I had these on my 68! but am trying to replace/sell them now but cant find any info on them other than they are eagle alloys.

Are they the 225?? They look a lot like them except mine have the rivet look.

UKNOWME · 06-29-2015, 12:26 AM

Here's mine...
20x8.5 275/40r20
20x10 295/40r20

Malo83 · 06-29-2015, 02:35 AM

Nice looking rides

Jstock85 · 09-05-2016, 02:24 PM

UKNOWME

You mind sharing a few details on your lowering job?

Thanks!

UKNOWME · 09-05-2016, 02:54 PM

Quote:

Originally Posted by Jstock85

UKNOWME

You mind sharing a few details on your lowering job?

Thanks!

Front is Belltech 3" coils and McGaughys 2" spindles
Rear McGaughys Flip kit with Belltech Shackles

lime1982 · 09-06-2016, 11:10 PM

Quote:

Originally Posted by muthstryker

I dont have them anymore but here ya go..

6/8 Drop
20x8.5 Front Nitto INVO 245/35/20
20x10 Rear Nitto INVO 295/35/20

And heres one with the truck sitting level due to a pallet full of wood in the bed!

Did you have to remove engine bay splash gaurds or cut rear wheel wells with this combination of tires wheels / drop .because this is the same setup I'm working on for my truck waiting for rims to be delivered now.

01-12-2011, 11:49 AM	#1
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	lets see your eagle alloys 225!! just like the title says..lets see your eagle alloys 225 and your drop an tire size. thanx

01-17-2011, 10:00 AM	#2
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Re: lets see your eagle alloys 225!! I agree, let's see em! Posted via Mobile Device __________________ Ben 84 C10 Silverado 14 Silverado Z71

01-17-2011, 05:09 PM	#3
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: lets see your eagle alloys 225!! I dont have them anymore but here ya go.. 6/8 Drop 20x8.5 Front Nitto INVO 245/35/20 20x10 Rear Nitto INVO 295/35/20 And heres one with the truck sitting level due to a pallet full of wood in the bed! Last edited by muthstryker; 01-17-2011 at 05:10 PM.

02-15-2011, 08:59 AM	#4
LivNLo94 Registered User Join Date: Jun 2010 Location: Odessa TX Posts: 83	Re: lets see your eagle alloys 225!! DJM 5/5 Kit, Belltech Nitro Drop 2 Shocks, 295/30ZR20 Rear, 255/35ZR20 Front Rides Nice! I might cut the springs and add shackles....

02-05-2013, 08:39 PM	#5
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! TTT ! Posted via Mobile Device

06-13-2013, 04:58 PM	#6
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! Where did you guys get your 225s? Thinking about picking up a set.

06-14-2013, 11:10 AM	#7
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: lets see your eagle alloys 225!! Was trying to get a set, but they don't have the backspacing I need in stock. Every vendor I spoke with says on back order with no date for shipping in the backspacing I wanted... Posted via Mobile Device

06-14-2013, 11:42 AM	#8
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! Hmmm... Kinda torn. It's between these and the Boss 335's. Currently leaning toward the 335s.

06-14-2013, 12:47 PM	#9
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: lets see your eagle alloys 225!! That is what I ended up with. Have to have my rotors machined down though because the bore on the 20x8.5 is tight. I like the look of the 225s better though. Posted via Mobile Device

06-14-2013, 12:54 PM	#10
Jmiller022 Registered User Join Date: Apr 2013 Location: Douglasville, Ga Posts: 212	Re: lets see your eagle alloys 225!! I had these on my 68! but am trying to replace/sell them now but cant find any info on them other than they are eagle alloys. Are they the 225?? They look a lot like them except mine have the rivet look. __________________ 68' c10 stepper 5.3/4L60e Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578917

06-29-2015, 12:26 AM	#11
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: lets see your eagle alloys 225!! Here's mine... 20x8.5 275/40r20 20x10 295/40r20 __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

06-29-2015, 02:35 AM	#12
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: lets see your eagle alloys 225!! Nice looking rides

09-05-2016, 02:24 PM	#13
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: lets see your eagle alloys 225!! UKNOWME You mind sharing a few details on your lowering job? Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.