|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-22-2011, 09:46 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: Eustis Florida
Posts: 22
|
Notched the frame...a little
Hey guys, I was looking for some opinions on the structural integrity of notching the frame for header clearance. My plan for the truck is a weekend cruiser and the occasional smokey burnout. Of coarse I will have to take it down the track at least three... times to establish talking points. I am leaving the suspension stock with the exception of the lowering shocks and springs now on the truck from cpp. Sometime in the future, I may add disc brakes as well. Should I maybe box weld in some steel where I notched the frame for the intended purpose of the truck as stated? The converter is questionable once I get the truck running, so a engine pull could be in the future. I am still a long way from firing her up. Thanks, Bill
|
|
|
|
02-22-2011, 10:01 PM
|
#2 |
|
Registered User
Join Date: Jun 2008
Location: space station delta farce (justin tx)
Posts: 594
|
Re: Notched the frame...a little
cool a olds, i am so glad some one put something in besides a small block chevy. grate job .
i have been wanting a buick nail head in one of mine . keep up the good work.
__________________
Between saying and doing many a pair of shoes are worn out 
|
|
|
|
|
02-22-2011, 10:06 PM
|
#3 |
|
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: Notched the frame...a little
My K20 had the frame notched to clear the headers and I never saw an issue with it.
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
|
|
|
|
02-22-2011, 10:13 PM
|
#4 |
|
Registered User
 
Join Date: Jul 2010
Location: memphis
Posts: 2,537
|
Re: Notched the frame...a little
Olds in a chevy..i love it, what cube is it?
Last edited by Pop's C-10; 02-22-2011 at 10:13 PM. |
|
|
|
|
02-22-2011, 10:17 PM
|
#5 |
|
Second Chance Program
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
|
Re: Notched the frame...a little
Should be fine by the looks of things. Very cool.
|
|
|
|
|
02-22-2011, 10:55 PM
|
#6 |
|
Registered User
Join Date: Nov 2010
Location: Eustis Florida
Posts: 22
|
Re: Notched the frame...a little
Thanks for the reply's. It's a 455.
|
|
|
|
|
02-22-2011, 11:25 PM
|
#7 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Notched the frame...a little
No problems there. 455's have some grunt. My old roomate had one in a 71 (or 72?) Cutlass. Mild compression & decent cam, it pulled hard.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
02-23-2011, 12:35 AM
|
#8 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Notched the frame...a little
No need for re-enforcement. Good job with the nice rounded notches. Keep us posted on your progress.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
12-14-2011, 11:25 PM
|
#9 |
|
Registered User
Join Date: Nov 2010
Location: Eustis Florida
Posts: 22
|
Re: Notched the frame...a little
Update.
After hours of work, ( as an amateur) I finally have the outer floors, lower fenders, rockers and cab corners replaced on my 65 fleet-side short bed. No formal training, just bought a wielder read some information and tore into it. I would like to thank everyone on this site that has expressed their knowledge and encouragement for others. I love the pictures that everyone posts and I know it gives me the motivation to try things I had never done. I am still not decided exactly the direction I am taking this build. I knew that I personally couldn't live with rusted out floors and rockers. I know I want a Flat paint, or even thought about a wrap, but I don't think a wrap will last for the long run. Thanks again. |
|
|
|
|
12-14-2011, 11:33 PM
|
#10 |
|
Registered User
Join Date: Nov 2010
Location: Eustis Florida
Posts: 22
|
Re: Notched the frame...a little
A few more.
|
|
|
|
|
12-15-2011, 11:56 AM
|
#11 |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
|
Re: Notched the frame...a little
Very cool! I had to trim the top portion of my frame, as well (running a Pontiac) to clear the header primaries.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
|
12-15-2011, 11:58 AM
|
#12 |
|
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: Notched the frame...a little
Nice looking work on both the engine and the body
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
|
|
|
|
12-15-2011, 06:31 PM
|
#13 |
|
Registered User
Join Date: Dec 2007
Location: PA
Posts: 326
|
Re: Notched the frame...a little
Looking good! makes ya feel good to do it yourself huh!
__________________
My build link.. http://67-72chevytrucks.com/vboard/s...d.php?t=285353 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
