Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-02-2011, 03:40 AM | #1 |
Registered User
Join Date: Feb 2011
Location: Luzerne pa
Posts: 9
|
Squishy brakes. Help!?
Today I was helping a friend work on his truck. After I left the brakes on my 86 blazer began to seem slightly soft but were still working fine. I later got in my blazer and found that my brakes have no power at all now and go right to the floor. I have no visible leaks anywhere. Can somebody help me?
Posted via Mobile Device |
03-02-2011, 03:50 AM | #2 |
Registered User
Join Date: Sep 2010
Location: Riverside, Ca
Posts: 141
|
Re: Squishy brakes. Help!?
have you checked your reservoir level yet?
__________________
85 C10 LWB 305ci - 700r4 - 10 bolt - 3:08 gears Collecting parts for a 'mild prerunner" |
03-02-2011, 03:53 AM | #3 |
Registered User
Join Date: Feb 2011
Location: Luzerne pa
Posts: 9
|
Re: Squishy brakes. Help!?
I did. It was low but after adding brake fluid it didn't help.
Posted via Mobile Device |
03-02-2011, 09:06 AM | #4 |
Registered User
Join Date: Sep 2010
Location: Riverside, Ca
Posts: 141
|
Re: Squishy brakes. Help!?
what happens if you just sit and pump the brakes repeatedly?
does the pedal get slightly firmer and then start to get squishy as you slow down?
__________________
85 C10 LWB 305ci - 700r4 - 10 bolt - 3:08 gears Collecting parts for a 'mild prerunner" |
03-02-2011, 10:39 AM | #5 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: Squishy brakes. Help!?
Sounds like the seals in the master cylinder are shot. Master cylinders are pretty cheap, I would try that first.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
03-02-2011, 03:21 PM | #6 |
Registered User
Join Date: Feb 2008
Location: la
Posts: 345
|
Re: Squishy brakes. Help!?
If there aren't any leaks at the fittings or the wheels I think its time for a new MC, new fluid throughout, new rubber hoses, and a good bleed job.
Should restore the system to like new. |
03-02-2011, 06:35 PM | #7 |
Registered User
Join Date: Feb 2011
Location: Luzerne pa
Posts: 9
|
Re: Squishy brakes. Help!?
It has a brake booster. Any chance that could be bad
Posted via Mobile Device |
03-03-2011, 11:18 PM | #8 |
Registered User
Join Date: Oct 2007
Location: Wilsonville Or
Posts: 705
|
Re: Squishy brakes. Help!?
It's not that. You either have a leak, bad seal, or air in the system. Simplest thing would be to top it off, keep it topped off and bleed the entire system and see what happens. Also pull the rear wheels off and drums and check out your wheel cylinders too. When you bleed it remember to do it in the correct order too. RR, LR, RF, then LF.
|
03-04-2011, 09:44 PM | #9 |
Registered User
Join Date: Jan 2011
Location: Silverdale, WA
Posts: 59
|
Re: Squishy brakes. Help!?
I'd put my vote on a bad master cylinder, too, since I've had a couple go that route.
One way to tell is if the fluid level is pretty much to the proper level, it's just about gotta' be the MC. If the MC is empty, then it's leaking somewhere. Repeated filling and pumping will only saturate your brake linings with brake fluid if a wheel cylinder is bad and render them useless. However, they are likely worn enough to replace anyway - and they're not a big ticket item, nor is a wheel cylinder or a master cylinder - especially if you do your own work. |
03-05-2011, 02:21 AM | #10 |
Registered User
Join Date: Feb 2011
Location: Luzerne pa
Posts: 9
|
Re: Squishy brakes. Help!?
Thanks for the help. Replacing the master cylinder Sunday. Il
Posted via Mobile Device |
03-09-2011, 08:45 PM | #11 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Squishy brakes. Help!?
sometimes when the master goes it will leak behind the master/ on the front of the booster sort of a trickle,sometimes paint comes off the booster
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
Bookmarks |
|
|