GMC Vin Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biohazardbill · 03-11-2011, 08:47 PM

I am trying to find the VIN on my 65 GMC. I have searched this site and they say to look over the drivers door. This is the plate over the drivers door, it does not look like a VIN to me, so where else should I look?

cb1965 · 03-11-2011, 08:58 PM

thats the one.

biohazardbill · 03-11-2011, 08:59 PM

So what part of that is the actual VIN? All of it?

cb1965 · 03-11-2011, 09:03 PM

bottom portion.
link to lmc

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=10

Surfdaddy · 03-11-2011, 09:34 PM

According to the 6066GMC web site your truck is---- 1/2 ton 127" wheelbase made in the Pontiac Mich plant between 1964-66 and has a gross weight under 6000lbs. I'm looking to see if there is a data base that will tell me the date of production on my 61 GMC.

Surfdaddy · 03-11-2011, 09:44 PM

That number is the complete vin number. It will also be on your DMV registeration card. I thought they had a build tag or build code on the truck but mine dosen't have one, and it's about as factory as you can get.

biohazardbill · 03-11-2011, 09:48 PM

So complete starting from the I on the left through the A? I am trying to get it registered, here in Ga they dont have titles for these so I have to get the Sheriff to come out and look at the truck and write down the vin for submission to DMV. However before he comes out I wanted to make sure this was it.

Surfdaddy · 03-11-2011, 10:00 PM

That's a 1, not a I. 1002 breaks down to 100 = 1/2 ton truck. 2 = 127" wheel base. P = pontiac Mich assembly plant F= 64-66 model year. 29675 is the number built (that's how many they built up to your truck) A= under 6000lbs GVW. My truck is 1502 = 3/4 ton 127" wheel base. CN made in Oakland Ca. and was built in 61. 3489B is the number of units made up to mine and B= onder 7200 lbs GVW. I gave the DMV and my insurance that number and it's what is on the regerstration.

jonzcustomshop · 03-12-2011, 01:50 AM

yes use the whole sequence, that is what they did in the 60's.

creep · 03-12-2011, 12:53 PM

Quote:

Originally Posted by Surfdaddy

That's a 1, not a I. 1002 breaks down to 100 = 1/2 ton truck. 2 = 127" wheel base. P = pontiac Mich assembly plant F= 64-66 model year. 29675 is the number built (that's how many they built up to your truck) A= under 6000lbs GVW. My truck is 1502 = 3/4 ton 127" wheel base. CN made in Oakland Ca. and was built in 61. 3489B is the number of units made up to mine and B= onder 7200 lbs GVW. I gave the DMV and my insurance that number and it's what is on the regerstration.

There is an "I" at the far left of the VIN. I think that indicates an inline 6 model and is part of the VIN. So it would be I1002PF29675A.

Surfdaddy · 03-12-2011, 02:10 PM

Sorry, I didn't see the stamp on the FAR right. My Bad !! My tag didn't have anything like that

03-11-2011, 08:47 PM	#1
biohazardbill Registered User Join Date: Jan 2010 Location: Forsyth, Ga Posts: 1,012	GMC Vin Question I am trying to find the VIN on my 65 GMC. I have searched this site and they say to look over the drivers door. This is the plate over the drivers door, it does not look like a VIN to me, so where else should I look?

03-11-2011, 08:58 PM	#2
cb1965 Registered User Join Date: Mar 2010 Location: san jose, california Posts: 508	Re: GMC Vin Question thats the one. __________________ '66 chevy lwb c10 '65 chevy lwb c20

03-11-2011, 08:59 PM	#3
biohazardbill Registered User Join Date: Jan 2010 Location: Forsyth, Ga Posts: 1,012	Re: GMC Vin Question So what part of that is the actual VIN? All of it?

03-11-2011, 09:03 PM	#4
cb1965 Registered User Join Date: Mar 2010 Location: san jose, california Posts: 508	Re: GMC Vin Question bottom portion. link to lmc http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=10 __________________ '66 chevy lwb c10 '65 chevy lwb c20 Last edited by cb1965; 03-11-2011 at 09:05 PM.

03-11-2011, 09:34 PM	#5
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: GMC Vin Question According to the 6066GMC web site your truck is---- 1/2 ton 127" wheelbase made in the Pontiac Mich plant between 1964-66 and has a gross weight under 6000lbs. I'm looking to see if there is a data base that will tell me the date of production on my 61 GMC. __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback

03-11-2011, 09:44 PM	#6
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: GMC Vin Question That number is the complete vin number. It will also be on your DMV registeration card. I thought they had a build tag or build code on the truck but mine dosen't have one, and it's about as factory as you can get. __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback

03-11-2011, 09:48 PM	#7
biohazardbill Registered User Join Date: Jan 2010 Location: Forsyth, Ga Posts: 1,012	Re: GMC Vin Question So complete starting from the I on the left through the A? I am trying to get it registered, here in Ga they dont have titles for these so I have to get the Sheriff to come out and look at the truck and write down the vin for submission to DMV. However before he comes out I wanted to make sure this was it.

03-11-2011, 10:00 PM	#8
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: GMC Vin Question That's a 1, not a I. 1002 breaks down to 100 = 1/2 ton truck. 2 = 127" wheel base. P = pontiac Mich assembly plant F= 64-66 model year. 29675 is the number built (that's how many they built up to your truck) A= under 6000lbs GVW. My truck is 1502 = 3/4 ton 127" wheel base. CN made in Oakland Ca. and was built in 61. 3489B is the number of units made up to mine and B= onder 7200 lbs GVW. I gave the DMV and my insurance that number and it's what is on the regerstration. __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback

03-12-2011, 01:50 AM	#9
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: GMC Vin Question yes use the whole sequence, that is what they did in the 60's. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

03-12-2011, 02:10 PM	#11
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: GMC Vin Question Sorry, I didn't see the stamp on the FAR right. My Bad !! My tag didn't have anything like that Attached Images __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.