Bucket Seat ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dons72 · 07-11-2003, 09:21 PM

I was wondering if anyone has a good pic of a houndstooth bucket seat. I also need the measurements of the middle section (width and how far from the top) also the width of the black sections on bottom and back. I am having an upholstery shop do my buckets and need these for them to reference. Thanks in advance for any help.
Don

dons72 · 07-12-2003, 07:43 AM

ttt.

1970blazin · 07-12-2003, 11:36 AM

I got these seat covers ordered from Franks PickMups here iin Olympia WA. Had an upholstery guy put them on and refoam them - lots of $$$ but I love them- way comfy! Cool too!!!!

3-1/5" inches of black vinyl top to top of houndstooth.

dons72 · 07-12-2003, 05:17 PM

thanks for the info.

LeftCoast32 · 07-12-2003, 05:29 PM

I have a question for you. Under the drivers seat the locking mech for the seat position has a lock on both sides. I need to see what the rod or mech looks like that connects them before I install my seats again.

BobbyK · 07-12-2003, 06:43 PM

When I got my Blazer that "rod" was missing on my drivers seat.I just cut a wire coat hanger and joined the two mechanisms that way.I didn't care how it looks and it works great.

07-11-2003, 09:21 PM	#1
dons72 Registered User Join Date: Mar 2003 Location: Newport News, Va Posts: 230	Bucket Seat ? I was wondering if anyone has a good pic of a houndstooth bucket seat. I also need the measurements of the middle section (width and how far from the top) also the width of the black sections on bottom and back. I am having an upholstery shop do my buckets and need these for them to reference. Thanks in advance for any help. Don __________________ 72 cheyenne super

07-12-2003, 07:43 AM	#2
dons72 Registered User Join Date: Mar 2003 Location: Newport News, Va Posts: 230	ttt. __________________ 72 cheyenne super

07-12-2003, 11:36 AM	#3
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	houndstooth bucket- I got these seat covers ordered from Franks PickMups here iin Olympia WA. Had an upholstery guy put them on and refoam them - lots of $$$ but I love them- way comfy! Cool too!!!! 3-1/5" inches of black vinyl top to top of houndstooth. Attached Images __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale Last edited by 1970blazin; 07-12-2003 at 11:57 AM.

07-12-2003, 05:17 PM	#4
dons72 Registered User Join Date: Mar 2003 Location: Newport News, Va Posts: 230	thanks for the info. __________________ 72 cheyenne super

07-12-2003, 06:43 PM	#6
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	When I got my Blazer that "rod" was missing on my drivers seat.I just cut a wire coat hanger and joined the two mechanisms that way.I didn't care how it looks and it works great. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

07-12-2003, 05:29 PM	#5
LeftCoast32 Custom Builder Join Date: Jun 2003 Location: Carlsbad, California Posts: 908	I have a question for you. Under the drivers seat the locking mech for the seat position has a lock on both sides. I need to see what the rod or mech looks like that connects them before I install my seats again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.