After market CPP front sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72chevy383* · 03-14-2011, 09:24 PM

Does anyone have a front sway bar from CPP? If so can you post pics? They look like they fasten to the lower a-arm different then the stock one.
Posted via Mobile Device

**lolife99** · 03-14-2011, 11:17 PM

Do you have a picture of CPP's sway bar?

**Clyde65** · 03-15-2011, 09:18 AM

Are you talking about this one? They connect with the end links and factory connect with the bushing type. most trucks have the bushing type connection, but either will work, cheapest way to go is get one off a truck in the JY, measure it and get the largest diameter you can. oh and all the clamps and stuff too.

**LEEVON** · 03-15-2011, 09:25 AM

They had that same bar (in gold color) on their EBAY store last week for $75 w/ free shipping. I picked one up, not too worried about the end link mounting, there are two holes in the lower control arm. If those don't work I'll drill another...

Mike J · 03-15-2011, 06:45 PM

Quote:

Originally Posted by LEEVON

They had that same bar (in gold color) on their EBAY store last week for $75 w/ free shipping. I picked one up, not too worried about the end link mounting, there are two holes in the lower control arm. If those don't work I'll drill another...

Yeah, I saw that too- and didnt buy one- now im kicking myself! lol (sorry for the thread hi-jack)

coloradosean2009 · 03-16-2011, 08:31 AM

Quote:

Originally Posted by LEEVON

They had that same bar (in gold color) on their EBAY store last week for $75 w/ free shipping. I picked one up, not too worried about the end link mounting, there are two holes in the lower control arm. If those don't work I'll drill another...

I tried locating their ebay store but was unable. Can you post a link so I can keep an eye out for the deals? Thanks

**LEEVON** · 03-16-2011, 12:58 PM

It's gone for some reason right now. I also bought an adjustable rear panhard for $40 / free shipping.

I cruise through there every so often and find good deals...not sure where it went? Maybe the deals were too good LOL

Mike J · 03-16-2011, 04:00 PM

yeah, i've been looking almost every day since I missed out on the last ones- and haven't seen any more yet...

**LEEVON** · 03-19-2011, 11:26 PM

My sway bar came this week, and it is BEEFY. The documents say 1.25", haven't checked it with a mic but it's every bit or more and solid. I hit a road block and had to do some fabrication/welding because I'm using the old school DJM 3" dropped lower control arms. The end link style bushings fit fine on factory arms, but there is not room on the DJM's. Nothing I can't fix but it's taking some time.

I would definitely get this bar again though! I'll get some pics when it's finished.

**LEEVON** · 05-11-2012, 09:17 PM

I should update you all, I've had this installed for over a year and the CPP sway bar interferes with the steering arm and there is no way around it. I have lowered and raised it to no avail, when I turn at certain times the idler arm hits the bar and limits my turning radius...they don't have the bends like factory bars making them narrower at the front.

coloradosean2009 · 05-11-2012, 10:42 PM

Thank you for the follow-up. I never got around to buying one and now I am glad that I didn't.

big_al_71 · 05-12-2012, 09:10 PM

leevon I had one on the front of my truck and I took it off when I went ato air bags and here are the marks that my cpp front sway bar had. I never noticed till I took it off.

**LEEVON** · 05-15-2012, 12:18 AM

Hmmm, mine hits closer to the bend, I got under there and looked at it tonight. I love the CPP bar it's beefy and end links are better than the stock mounts but it aint gonna fit. I'll be looking for a stocker...

Andy4639 · 05-15-2012, 12:29 AM

I can't say if it's a CPP are a ECP bar but here it is.

**LEEVON** · 05-15-2012, 09:53 AM

Looks like you've got plenty of room, must be my combo of drop components.

03-14-2011, 09:24 PM	#1
72chevy383 Account Suspended Join Date: Feb 2010 Location: Bessemer City, NC Posts: 347	After market CPP front sway bar Does anyone have a front sway bar from CPP? If so can you post pics? They look like they fasten to the lower a-arm different then the stock one. Posted via Mobile Device

03-14-2011, 11:17 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: After market CPP front sway bar Do you have a picture of CPP's sway bar? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-15-2011, 09:18 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,547	Re: After market CPP front sway bar Are you talking about this one? They connect with the end links and factory connect with the bushing type. most trucks have the bushing type connection, but either will work, cheapest way to go is get one off a truck in the JY, measure it and get the largest diameter you can. oh and all the clamps and stuff too. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 03-15-2011 at 09:23 AM.

03-15-2011, 09:25 AM	#4
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar They had that same bar (in gold color) on their EBAY store last week for $75 w/ free shipping. I picked one up, not too worried about the end link mounting, there are two holes in the lower control arm. If those don't work I'll drill another... __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

03-16-2011, 12:58 PM	#7
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar It's gone for some reason right now. I also bought an adjustable rear panhard for $40 / free shipping. I cruise through there every so often and find good deals...not sure where it went? Maybe the deals were too good LOL __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

03-16-2011, 04:00 PM	#8
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: After market CPP front sway bar yeah, i've been looking almost every day since I missed out on the last ones- and haven't seen any more yet... __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

03-19-2011, 11:26 PM	#9
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar My sway bar came this week, and it is BEEFY. The documents say 1.25", haven't checked it with a mic but it's every bit or more and solid. I hit a road block and had to do some fabrication/welding because I'm using the old school DJM 3" dropped lower control arms. The end link style bushings fit fine on factory arms, but there is not room on the DJM's. Nothing I can't fix but it's taking some time. I would definitely get this bar again though! I'll get some pics when it's finished. __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-11-2012, 09:17 PM	#10
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar I should update you all, I've had this installed for over a year and the CPP sway bar interferes with the steering arm and there is no way around it. I have lowered and raised it to no avail, when I turn at certain times the idler arm hits the bar and limits my turning radius...they don't have the bends like factory bars making them narrower at the front. __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-11-2012, 10:42 PM	#11
coloradosean2009 Registered User Join Date: Aug 2009 Location: Denver, CO Posts: 291	Re: After market CPP front sway bar Thank you for the follow-up. I never got around to buying one and now I am glad that I didn't. __________________ __________________________________________ Sean 1972 C20 2005 4Runner

05-12-2012, 09:10 PM	#12
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: After market CPP front sway bar leevon I had one on the front of my truck and I took it off when I went ato air bags and here are the marks that my cpp front sway bar had. I never noticed till I took it off. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-15-2012, 12:18 AM	#13
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar Hmmm, mine hits closer to the bend, I got under there and looked at it tonight. I love the CPP bar it's beefy and end links are better than the stock mounts but it aint gonna fit. I'll be looking for a stocker... __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-15-2012, 12:29 AM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: After market CPP front sway bar I can't say if it's a CPP are a ECP bar but here it is. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

05-15-2012, 09:53 AM	#15
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: After market CPP front sway bar Looks like you've got plenty of room, must be my combo of drop components. __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.