Header Option - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bigo Serge · 03-17-2011, 07:07 PM

Hey Guys,
I'm looking to buy some headers that will work with my LQ4 motor without hanging too low. I have a 3/5 drop on my 72 cheyenne, and don't want to worry about them hitting the speed bumps.

I was looking at DT headers, but they aren't ready with the big tubes. I came across some schoenfeld headers. http://www.schoenfeldheaders.com/LS1-TRUCK.htm
These headers come with a 1 3/4 primary, the DT headers do not.
Has anyone used these headers??

Thanks for your input.

67C10BUB · 03-18-2011, 05:45 AM

I went with the DT headers and they fit perfectly. I wouldn't rule them out if I were you.

harnalien · 03-18-2011, 09:52 AM

Quote:

Originally Posted by Bigo Serge

Hey Guys,
I'm looking to buy some headers that will work with my LQ4 motor without hanging too low. I have a 3/5 drop on my 72 cheyenne, and don't want to worry about them hitting the speed bumps.

I was looking at DT headers, but they aren't ready with the big tubes. I came across some schoenfeld headers. http://www.schoenfeldheaders.com/LS1-TRUCK.htm

Has anyone used these headers??

Thanks for your input.

Those look nice with a good price. I can't tell for sure if they'd fit my 2wd '84. Hopefully someone posts some experience.
Posted via Mobile Device

camarossrulz · 03-20-2011, 11:03 AM

prob a stupid question but will headers from a 98-02 camaro work in a 72 with a ls1? just wondering because i can get a set for nearly nothing

Super73 · 03-20-2011, 08:01 PM

I am running Edelbrock headers for the 98-02 F-bodies in mine. But, my motor is set as far back as possible. The passanger coil pack just about touches the firewall (maybe 1/16" away).

shrunken66stroker · 03-20-2011, 10:23 PM

Can you throw up a pic Super73. I'd like to see how they look. Thanks

flamingbig10 · 03-20-2011, 11:29 PM

I have hooker Super Comp 64-72 lsx swap chevelle headers in mine

Super73 · 03-21-2011, 01:41 AM

This is when I first put it together in Feb/07.. No tubes were dented. But before I put it all together (slip fit collector) I did put a piece of pipe inside each primary tube and moved them over a little so it would clear the lower section of the frame rail.

camarossrulz · 03-21-2011, 06:22 AM

looks good, thanks for the pics

bark · 03-21-2011, 08:51 PM

hey those look great, did you mod them at all? also how low do they hang?

and do you have a part number handy, I want some for my 76

thanks

Quote:

Originally Posted by flamingbig10

I have hooker Super Comp 64-72 lsx swap chevelle headers in mine

52 Rat · 03-22-2011, 09:51 PM

I would like a full length header but I can't find a set for a 47-54 Chevy AD with a LS set up. I am running a lq4 6.0. I have a new set of Hooker Super Comp block hugger but rather have a long tube header. Any advise is greatly appreciated.

flamingbig10 · 03-23-2011, 01:30 AM

Bark the headers part # 2289-1HKR. with a 4l80e it will require, trimming on fly wheel cover and the passenger side ear on trans missions and its close to the but I'll get some kind of heat wrap for the starter and the factory plug wires don't fit so I'm going to try some msds, the headers have clearance on the frame and they hang above the bottom of the frame

bark · 03-23-2011, 08:41 PM

awesome you ROCK... thanks for the info

Quote:

Originally Posted by flamingbig10

Bark the headers part # 2289-1HKR. with a 4l80e it will require, trimming on fly wheel cover and the passenger side ear on trans missions and its close to the but I'll get some kind of heat wrap for the starter and the factory plug wires don't fit so I'm going to try some msds, the headers have clearance on the frame and they hang above the bottom of the frame

52 Rat · 03-23-2011, 08:49 PM

Quote:

Originally Posted by flamingbig10

Bark the headers part # 2289-1HKR. with a 4l80e it will require, trimming on fly wheel cover and the passenger side ear on trans missions and its close to the but I'll get some kind of heat wrap for the starter and the factory plug wires don't fit so I'm going to try some msds, the headers have clearance on the frame and they hang above the bottom of the frame

Do you think they would fit a 52 frame? I can't find a full length header for my truck.

Bigo Serge · 03-23-2011, 11:40 PM

I just bought a pair of Doug Thorleys headers for hella cheap....$$495 delivered!!!

http://www.dougthorley.com/

Part number THY-324Y-C, "PROMO CODE DT"

Thanks for everyones input, greatly appreciated!

03-17-2011, 07:07 PM	#1
Bigo Serge Registered User Join Date: Dec 2009 Location: Wichita, ks Posts: 59	Header Option Hey Guys, I'm looking to buy some headers that will work with my LQ4 motor without hanging too low. I have a 3/5 drop on my 72 cheyenne, and don't want to worry about them hitting the speed bumps. I was looking at DT headers, but they aren't ready with the big tubes. I came across some schoenfeld headers. http://www.schoenfeldheaders.com/LS1-TRUCK.htm These headers come with a 1 3/4 primary, the DT headers do not. Has anyone used these headers?? Thanks for your input. __________________ Pick'em up, lay'em down, Oh Yeahhh Last edited by Bigo Serge; 03-20-2011 at 05:49 PM. Reason: Added the size of the primary tubes.

03-18-2011, 05:45 AM	#2
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Header Option I went with the DT headers and they fit perfectly. I wouldn't rule them out if I were you. __________________ 67 5.3L Build

03-20-2011, 11:03 AM	#4
camarossrulz Registered User Join Date: Sep 2007 Location: south shore KY Posts: 43	Re: Header Option prob a stupid question but will headers from a 98-02 camaro work in a 72 with a ls1? just wondering because i can get a set for nearly nothing __________________ 1972 C-10 short bed, 2wd, 350(ls1 coming soon) 1969 camaro ss, 496 stoker, 4sp 2009 crew cab,duramax 2500hd 4x4, lifted (sold) 2008 Daytona Charger, Hemi Orange, 07 C6 Z06 2005 suburban, 2002 grand prix gt 2005 grizzly, 2004 R1

03-20-2011, 08:01 PM	#5
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Header Option I am running Edelbrock headers for the 98-02 F-bodies in mine. But, my motor is set as far back as possible. The passanger coil pack just about touches the firewall (maybe 1/16" away). __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-20-2011, 10:23 PM	#6
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Header Option Can you throw up a pic Super73. I'd like to see how they look. Thanks __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-20-2011, 11:29 PM	#7
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Header Option I have hooker Super Comp 64-72 lsx swap chevelle headers in mine __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-21-2011, 01:41 AM	#8
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Header Option This is when I first put it together in Feb/07.. No tubes were dented. But before I put it all together (slip fit collector) I did put a piece of pipe inside each primary tube and moved them over a little so it would clear the lower section of the frame rail. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-21-2011, 06:22 AM	#9
camarossrulz Registered User Join Date: Sep 2007 Location: south shore KY Posts: 43	Re: Header Option looks good, thanks for the pics __________________ 1972 C-10 short bed, 2wd, 350(ls1 coming soon) 1969 camaro ss, 496 stoker, 4sp 2009 crew cab,duramax 2500hd 4x4, lifted (sold) 2008 Daytona Charger, Hemi Orange, 07 C6 Z06 2005 suburban, 2002 grand prix gt 2005 grizzly, 2004 R1

03-22-2011, 09:51 PM	#11
52 Rat Registered User Join Date: Aug 2010 Location: Asheville, NC Posts: 291	Re: Header Option I would like a full length header but I can't find a set for a 47-54 Chevy AD with a LS set up. I am running a lq4 6.0. I have a new set of Hooker Super Comp block hugger but rather have a long tube header. Any advise is greatly appreciated. __________________ My build project http://67-72chevytrucks.com/vboard/s...=1#post4158671

03-23-2011, 01:30 AM	#12
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Header Option Bark the headers part # 2289-1HKR. with a 4l80e it will require, trimming on fly wheel cover and the passenger side ear on trans missions and its close to the but I'll get some kind of heat wrap for the starter and the factory plug wires don't fit so I'm going to try some msds, the headers have clearance on the frame and they hang above the bottom of the frame __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-23-2011, 11:40 PM	#15
Bigo Serge Registered User Join Date: Dec 2009 Location: Wichita, ks Posts: 59	Re: Header Option I just bought a pair of Doug Thorleys headers for hella cheap....$$495 delivered!!! http://www.dougthorley.com/ Part number THY-324Y-C, "PROMO CODE DT" Thanks for everyones input, greatly appreciated! __________________ Pick'em up, lay'em down, Oh Yeahhh Last edited by Bigo Serge; 03-23-2011 at 11:41 PM. Reason: Thanking everyone



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.