GA Square body bumper guards wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72freak · 03-24-2011, 06:44 AM

I need 2 sets of clean bumper guards. they dont have to be perfect but prefer no rust. Thanks

Let me know what you have.

**72 LONGHORN** · 03-29-2011, 08:15 PM

72freak, I have a set of bumper guards that should clean up ok. I'll try to post some pics for you later tonight.

BustedTruck · 03-29-2011, 10:07 PM

I may have a set also. I'll let you know what condition they are tommorow.

**72 LONGHORN** · 03-29-2011, 11:03 PM

72freak, here are the pics of the pair I have $33 shipped.

72freak · 03-30-2011, 05:33 AM

I will take them both pending pics and fitment.....I didnt know this but someone said there was a difference from 74-80 and 81-87....can anyone confirm?

csa daddy · 03-30-2011, 07:43 AM

i should have a set of each i will get pics in a little while a post them up

*87 chevy silverado* · 03-30-2011, 05:38 PM

the ones in the pics are 81-87

BustedTruck · 03-30-2011, 06:02 PM

Here ya go. Just let me know. $15 plus shipping unless you wanna drive over & pick em up. They aren't rusted out, but have some surface rust on the back side.

Big Port Jimmy 6 · 03-30-2011, 09:59 PM

The second set appear to be 73-80. Jay

BigRed76 · 03-30-2011, 10:45 PM

73-80 and 81-87 bumper guards were different because the 73-80 and 81-87 bumpers were different. The only difference between the two is the shape of the side that faces the bumper.

72freak · 03-31-2011, 04:37 PM

Quote:

Originally Posted by Big Port Jimmy 6

The second set appear to be 73-80. Jay

I agree with the above.....BustedTruck...what year truck is that?

BustedTruck · 03-31-2011, 04:45 PM

1976
Posted via Mobile Device

72freak · 04-02-2011, 04:46 PM

Quote:

Originally Posted by BustedTruck

1976
Posted via Mobile Device

Thanks....I need 81+

Walts_restoration · 04-02-2011, 04:57 PM

dont forget some of the 89-91s had a rubber pad on the bumper, so they wont work.

Walts_restoration · 04-02-2011, 04:58 PM

thats 89-91 square body, as is crew cab suburban and c+c and blazer.

03-24-2011, 06:44 AM	#1
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Square body bumper guards wanted I need 2 sets of clean bumper guards. they dont have to be perfect but prefer no rust. Thanks Let me know what you have. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-29-2011, 08:15 PM	#2
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Square body bumper guards wanted 72freak, I have a set of bumper guards that should clean up ok. I'll try to post some pics for you later tonight.

03-29-2011, 10:07 PM	#3
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted I may have a set also. I'll let you know what condition they are tommorow.

03-29-2011, 11:03 PM	#4
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Square body bumper guards wanted 72freak, here are the pics of the pair I have $33 shipped. Attached Images

03-30-2011, 05:33 AM	#5
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Square body bumper guards wanted I will take them both pending pics and fitment.....I didnt know this but someone said there was a difference from 74-80 and 81-87....can anyone confirm? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-30-2011, 07:43 AM	#6
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,205	Re: Square body bumper guards wanted i should have a set of each i will get pics in a little while a post them up

03-30-2011, 05:38 PM	#7
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Square body bumper guards wanted the ones in the pics are 81-87

03-30-2011, 06:02 PM	#8
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted Here ya go. Just let me know. $15 plus shipping unless you wanna drive over & pick em up. They aren't rusted out, but have some surface rust on the back side. Attached Images

03-30-2011, 09:59 PM	#9
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: Square body bumper guards wanted The second set appear to be 73-80. Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

03-30-2011, 10:45 PM	#10
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Square body bumper guards wanted 73-80 and 81-87 bumper guards were different because the 73-80 and 81-87 bumpers were different. The only difference between the two is the shape of the side that faces the bumper. __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB Last edited by BigRed76; 03-30-2011 at 10:46 PM.

03-31-2011, 04:45 PM	#12
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted 1976 Posted via Mobile Device

04-02-2011, 04:57 PM	#14
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Square body bumper guards wanted dont forget some of the 89-91s had a rubber pad on the bumper, so they wont work. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

04-02-2011, 04:58 PM	#15
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Square body bumper guards wanted thats 89-91 square body, as is crew cab suburban and c+c and blazer. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.